Please wait

Your message is being sent

An error occurred

CO meter testo 317-3 | Type: testo 317-3
CO meter testo 317-3 | Type: testo 317-3
Brand: Testo SE & CO KGaAThe CO meter is suitable for measuring carbon monoxide in ambient air.No zero phase, device is immediately ready for useCO zeroing at siteAlarm threshold freely adjustableAcoustic and optical alarm when limit value is exceededScope of supply: CO meter, carrying case with belt clip, earphones, handstrap, calibration protocol
€187,00
CO2 Absorber and sterile filter for storage reservoirs of the water purification systems Barnstead™ | Description : CO2 Absorber and sterile filter
CO2 Absorber and sterile filter for storage reservoirs of the water purification systems Barnstead™ | Description : CO2 Absorber and sterile filter
Brand: Thermo Elect.LED GmbH (Kendro)The combination of sterile filter (0.2 µm) and CO2 absorber prevents CO2 from entering the storage reservoir (30 to 100 l) and extends the service life of the cartridge.
€337,00
CO2 incubator, BBD 6220 | Type: 6-door tight fitting gas pinhole instead of glass door
CO2 incubator, BBD 6220 | Type: 6-door tight fitting gas pinhole instead of glass door
Brand: Thermo Elect.LED GmbH (Kendro)Available in 7 variants
€2.900,00
CO2 incubator, BBD 6220 | Type: BBD 6220
CO2 incubator, BBD 6220 | Type: BBD 6220
Brand: Thermo Elect.LED GmbH (Kendro)BBD 6220 provides stable growth conditions and a high degree of security and protection against contamination. Typical applications are for IVF or pathogenic work. Range: ambient + 5°C to 50°C, humidity greater than 95% R.H. and CO2 concentrations between 0 and 20% Vol are reliably achieved via a microprocessor controlled measuring and control system. An automatic disinfection routine at 180°C, which safely eliminates bacteria, fungi and spores, decontaminates the entire interior space including the sensors and fittings. The humidity water reservoir is located outside the chamber. The water is sterilised before it is used for humidification. The stainless steel chamber is crevice-free with rounded corners for easy cleaning. Includes "Heraeus CO2 Autozero System" overtemperature protection with separate probe and RS232 interface.
€26.381,00
CO2 incubators CB | Type: CB56, Nominal capacity l: 53, Max. grids: 3
CO2 incubators CB | Type: CB56, Nominal capacity l: 53, Max. grids: 3
Brand: BINDER GmbHAvailable in 5 variantsHumidification system with condensation protectionTouchscreen controllerFail-safe CO2 system for protecting the pH of cell culturesType -O: with O2 control (0.2 to 20 vol.%)
€8.376,00
CO2 incubators CB-S Solid.Line | Type: CB-S 170, Nominal capacity l: 170, Max. grids: 6
CO2 incubators CB-S Solid.Line | Type: CB-S 170, Nominal capacity l: 170, Max. grids: 6
Brand: BINDER GmbHAvailable in 2 variantsHumidification system with condensation protectionPID controller with LCD display
€7.857,00
CO2 incubators CBF, with humidity regulation | Type: CBF170-O, Nominal capacity l: 170, Max. grids: 6
CO2 incubators CBF, with humidity regulation | Type: CBF170-O, Nominal capacity l: 170, Max. grids: 6
Brand: BINDER GmbHAvailable in 6 variantsContamination-safe humidification system without water panTouchscreen controllerFail-safe CO2 system for protecting the pH of cell culturesType -O: with O2 control (0.2 to 20 vol.%)Model variant cell therapy (Type -Z):Inner door divided into 8 parts with cell therapy compartmentalisationStainless steel inner door with 8 separate glass doors4 shelf levels with 8 insertsIndividual inserts can be pulled out completelyEach level is physically separated by an additional partition wall
€14.876,00
CO2 Incubators CelCulture® with copper interior/air jacket and ULPA filter | Type: CCL-050B-8-Cu, Nominal capacity: 50 l, Temperature: RT+5 ... 60 °C
CO2 Incubators CelCulture® with copper interior/air jacket and ULPA filter | Type: CCL-050B-8-Cu, Nominal capacity: 50 l, Temperature: RT+5 ... 60 °C
Brand: ESCO Lifesciences GmbHAvailable in 3 variantsULPA filtration system with internal blower90 °C moist heat decon system
€7.208,00
CO2 Incubators CelCulture® with high heat sterilization and ULPA filter | Type: CCL-170B-8-HHS, Nominal capacity: 170 l, Temperature: RT+5 ... 60 °C
CO2 Incubators CelCulture® with high heat sterilization and ULPA filter | Type: CCL-170B-8-HHS, Nominal capacity: 170 l, Temperature: RT+5 ... 60 °C
Brand: ESCO Lifesciences GmbHAvailable in 8 variantsIncubator with 180 °C high heat sterilization cycle, for efficient contamination protection. Conforms to the international standards for dry heat sterilization.Heat-resistant sensorsIR CO2 sensorULPA filtration system with internal blower2 MB built-in flash memory for data and event logging
€8.712,00
CO2 Incubators CelCulture® with stainless steel interior/air jacket and ULPA filter | Type: CCL-050B-8, Nominal capacity: 50 l, Temperature: RT+5 ... 60 °C
CO2 Incubators CelCulture® with stainless steel interior/air jacket and ULPA filter | Type: CCL-050B-8, Nominal capacity: 50 l, Temperature: RT+5 ... 60 °C
Brand: ESCO Lifesciences GmbHAvailable in 5 variantsULPA filtration system with internal blower 90 °C moist heat decon system
€4.792,00
CO2 incubators Heracell™ VIOS 160i, single chamber, TC-CO2 sensor | Type: Heracell™ VIOS 160i, Nominal capacity: 165 l, Temperature: RT+3 ... 55 °C
CO2 incubators Heracell™ VIOS 160i, single chamber, TC-CO2 sensor | Type: Heracell™ VIOS 160i, Nominal capacity: 165 l, Temperature: RT+3 ... 55 °C
Brand: Thermo Elect.LED GmbH (Kendro)Available in 11 variants
€12.042,00
CO2 Incubators ICOmed | Type: ICO50med, Nominal capacity l: 56, Max. grids: 5
CO2 Incubators ICOmed | Type: ICO50med, Nominal capacity l: 56, Max. grids: 5
Brand: Memmert GmbH + Co. KGAvailable in 4 variantsThe CO2 incubator ICOmed is the perfect solution: Thanks to the battery-buffered ControlCOCKPIT, the operating display, logging and CO2control remain fully functional even when there is a power failure. All parameters are logged in accordance with the FDA and, when individually adjusted ranges for CO2, O2, temperature and humidity are exceeded, notifications can be sent to a mobile phone in addition to an alarm. With its rounded corners, the interior is easy to clean and can be sterilised for 60 minutes at 180 °C (including all sensors). The active humidity control offers optimal protection for cell and tissue cultures. It minimizes evaporation in the interior and ensures short recovery times. Every Memmert CO2 incubator ICOmed is a medical device of class IIa according to MDD 93/42/EEC until 26 May 2024 according to the transitional provisions by the (EU) 2017/745 article 120 (2).fully insulated stainless steel door and heated inner glass doorModel variant TwinDISPLAY: ControlCOCKPIT with two colour displaysYou can find a detailed description of the "TwinDISPLAY" model at www.memmert.com
€5.868,00

Our website uses cookies.
Both we and our third-party partners use cookies. Some are strictly necessary for the site to function, but there are also optional cookies.

Necessary and functional cookies are always on. If you click "accept all cookies", you also accept the optional cookies. You can choose which cookies you want to enable via "set preferences".

Our website uses cookies.
What are cookies? What cookies do we use and why? Read more in our cookie policy

Necessary cookies

Cookies that are indispensable for your visit to the Website and the correct use thereof

Functional cookies

Cookies that make it easier and more pleasant for you to visit the Website, for example by personalising your browsing experience.

Performance cookies

Cookies that collect information about your use of the Website in order to improve the content of the Website and adapt it to the wishes of the User.

Third-party cookies

Cookies placed by third parties who offer their own services via the Website, such as social media, advertisements or video services.