Please wait

Your message is being sent

An error occurred

Analytical measurement and testing

Chromatography

Cleaning and sterilisation

Cleanroom

Distillation, separation, filtration

Environmental-, soil-, water-, food analysis

General laboratory consumables

Heating and cooling technology

Life sciences

Liquid handling

Occupational safety, security

Optical instruments and microscopes

Sample preparation

Stirring, shaking, mixing

Vacuum technology, drying, dry storage

176177178179180181
Climate measuring instrument testo 440 with CO2 sensor | Type: Indoor air quality kit testo 440 with CO2 probe
Climate measuring instrument testo 440 with CO2 sensor | Type: Indoor air quality kit testo 440 with CO2 probe
Brand: Testo SE & CO KGaAFor reliable assessment of indoor air quality. Complete set for long-term measurement and parallel determination of CO2 concentration, humidity and indoor air temperature. Consisting of the climate measuring device testo 440, a multifunctional, wireless handle and CO2 sensor. With absolute pressure compensation, calculation of wet bulb temperature, dew point and absolute humidity. Fully configured, ready for use.Wireless handle with Bluetooth® technologyEasy, intuitive operationEasy storage of measured values by means of a button on the handleLarge, illuminated graphic LCD with parallel display of 3 measured valuesMeasuring instrument with magnetic fixation on metal surfacesInternal data storage and USB interfaceHandle can be extended with other probes to measure further parametersAutomatic probe recognitionScope of supply: Multifunctional climate measuring instrument testo 440, USB cable, handle with CO2 probe incl. temperature and humidity sensor, table stand, batteries and calibration protocols for measuring device and sensors, transport case
€829,00
Climate measuring instruments testo 440 | Type: testo 440 dP
Climate measuring instruments testo 440 | Type: testo 440 dP
Brand: Testo SE & CO KGaAAvailable in 2 variantsThe climate measuring instruments testo 440 combine the benefits of a compact handheld device with intuitive measurement menus and a comprehensive selection of air velocity & IAQ probes. Both the digital Testo Smart Probes and numerous Testo temperature probes can be connected. Clearly structured menus for measuring volume flow in ducts/at outlets, degree of turbulence, cooling/heating load, mould indication and logging mode are stored on the instrument.The testo 440 dP also has an integrated differential pressure sensor. This makes measurements at filters as well as Pitot tube and K-factor measurements possible.USB interface for data export and optional printout of measuring valuesUp to 3 probes can be connectedParallel display of 3 measuring valuesBluetooth probes for measuring convenience and easy storage in the caseUniversal handle for all probesMeasurement of the following parameters are possible: °C, % r.h., CO, CO2, m/s, Lux, hPaPlease order probes separately.
€456,00
Climatic Test Chamber CTC256/Temperature Test chamber TTC256 | Type: TTC256, Capacity l: 256, Shelf support ribs/shelves: 6/1
Climatic Test Chamber CTC256/Temperature Test chamber TTC256 | Type: TTC256, Capacity l: 256, Shelf support ribs/shelves: 6/1
Brand: Memmert GmbH + Co. KGAvailable in 2 variantsSimulate the perfect atmosphere for climate and temperature tests, specifically in accordance with DIN EN 60068-2-1, 2-2 and 2-3. Provide unlimited flexibility for controlled material and function tests as well as ageing tests.Standard equipmentVentilation and Control: high-performance air fan in working chamberdepending on operation status automatically variable fan speed with manual adjustment from 10% to 100%adaptive, fuzzy-supported multifunctional digital microprocessor PID-controllerautodiagnostic system with fault indication on temperature and humidity control2 x Class A, 4-wire circuit, Pt100 sensors, mutually monitoring and maintaining performance at the same temperature valuedigital 7-day-programme-timer with real time clock, precise minute settingintegral timer for heating profiles of up to 40 ramps, each segment adjustable from 1 min. up to 999 hoursdigital display (LED) of all set parameters, such as temperature, weekdays, time, humidity and set-up values - language to be chosen in setupdigital display of set values (resolution: 0.1°C below 99.9°C, 0.5°C above 100°C) and actual values (resolution: 0.1°C) of temperature (LED)long-term documenting (ring store) of all relevant data, GLP-conforming as data logger - 1024 kBprogramme stored on power failureparallel printer interface (incl. real-time clock with date function) for all PCL3-compatible ink-jet printers for GLP-conforming documentationUSB interface including Memmert "Celsius" software for programming and documentationchip card control incl. one MEMoryCard XL with 32 kB (up to 40 ramps)incl. works calibration certificate for -20°C and +160°CHeating concept: high-performance ring heaters with optimised air circulationdoor heating to avoid condensateCooling Concept twin compressor speed adjustable condenser fan refrigerant R404A Multiple Overtemperature Protection with audible and visual alarm in case of over-/undertemperature and over-/under-humidity, open door and empty water tank independently working, digitally adjustable electronic overtemperature controller, TWW protection class 3.3additional adjustable Auto-Safety-Function "ASF" for over- and undertemperature automatically following the set value at a preset tolerance range mechanical temperature limiter TB class 1 switching the heating off at approx.10°C above max. oven temperatureTemperature range:CTC/TTC: without humidity control: from -42°C up to +190°CCTC: with humidity control: from +10°C up to +95°CPower supply 400 V, 3ph, N, 50 HzStandards for CTC additionally:Electronically controlled active humidification and dehumidification from 10% to 98% rh with digital display of the relative humidity, display resolution 0.5%, setting accuracy 1%incl. works calibration certificate for +30°C at 60% rhHumidity supply with distilled water from 2 x 10 l tanks on integrated telescopic slide, with automatic water tank change-over2 x 10L tanks acting as condensate collectors, on telescopic slide mounts
€22.889,00
Cling film Toppits® | Width mm: 320, Length m: 20
Cling film Toppits® | Width mm: 320, Length m: 20
Brand: Melitta Europa GmbH&Co.KGEasy to use and better adhesionOur best freshness protectionSlight initial determinationVery easy to rollParticularly strongWith time beginning FinderTear-off cap box with stableRole of fixation for easy rolling
€5,68
Clinical thermometer, digital | Description : Clinical thermometer, digital
Clinical thermometer, digital | Description : Clinical thermometer, digital
Brand: Amarell GmbH & Co KGDigital: 32 to 42 °C; 0.1 °C, with signal, waterproof, approx. 125 mm x 18 mm.
€8,56
Clip hood | Colour: white, Size: big, Ø mm: 550
Clip hood | Colour: white, Size: big, Ø mm: 550
Brand: Unigloves GmbHAvailable in 3 variantsnon-woven fabricsoft quality with double-sheathed cotton elastic bandgatheredfood-safePackaging 10 x 100 pieces
€53,09
Clip plate for volumetric flasks
Clip plate for volumetric flasks
Brand: Scientific Industries, Inc.Clip plate made of metal for holding volumetric flasks. The clip plate can be attached to the magnetic platform.
€65,00
Clip plates for rotator drum STR4/1 | Ø mm: 19, No. of tubes: 8
Clip plates for rotator drum STR4/1 | Ø mm: 19, No. of tubes: 8
Brand: Cole-Parmer Ltd. (Stuart)Available in 4 variantsFitted with clips to accept tubes vertically. Supplied in pairs.
€190,53
Clip plates for tubes
Clip plates for tubes
Brand: Scientific Industries, Inc.Available in 6 variantsClip plates made of metal for holding different tubes. The clip plates can be attached to the magnetic platform.
€33,70
Clip-on magnifiers laboCLIP | Type: labo-clip, Description: binocular, Working Distance mm: 250
Clip-on magnifiers laboCLIP | Type: labo-clip, Description: binocular, Working Distance mm: 250
Brand: Eschenbach Optik GmbHAvailable in 2 variantsThe labo-clip system can be easily attached to the spectacle frame. The labo-clip leaves both hands free for working. Comfortable working distance even with a high level of magnification.Used with distance spectacles to achieve optimum image quality, fits most eyeglass framesWhen not needed, the lens can be flipped up and out of the wayLenses are interchangeable for different magnification needsLens sizes: monocular dia. 40mm, binocular 74.5 x 22.5mmLightweightLens clamp made from glass fibre reinforced plasticSupplied with protective box
€62,94
Clips for centrifuges Cellspin® and Shandon™ Cytospin™, stainless steel | Description: Clip, For: Shandon™ Cytospin™ und Cellspin® EASY rotors
Clips for centrifuges Cellspin® and Shandon™ Cytospin™, stainless steel | Description: Clip, For: Shandon™ Cytospin™ und Cellspin® EASY rotors
Brand: THARMAC GmbHAvailable in 2 variants
€44,00
176177178179180181

Copyright © 2026 - Achrom nv - BE 0445.025.508    |    General terms    |    Cookiebeleid    |    Privacybeleid    |    Handcrafted by CrayonCru®

Our website uses cookies.
Both we and our third-party partners use cookies. Some are strictly necessary for the site to function, but there are also optional cookies.

Necessary and functional cookies are always on. If you click "accept all cookies", you also accept the optional cookies. You can choose which cookies you want to enable via "set preferences".

Our website uses cookies.
What are cookies? What cookies do we use and why? Read more in our cookie policy

Necessary cookies

Cookies that are indispensable for your visit to the Website and the correct use thereof

Functional cookies

Cookies that make it easier and more pleasant for you to visit the Website, for example by personalising your browsing experience.

Performance cookies

Cookies that collect information about your use of the Website in order to improve the content of the Website and adapt it to the wishes of the User.

Third-party cookies

Cookies placed by third parties who offer their own services via the Website, such as social media, advertisements or video services.