Accessories for polySteribox® | Description: Permanent filterset for polysteribox® L + XL
Brand: Ritter GmbHAvailable in 11 variantsAccessories for polySteribox® | Description: Permanent filterset for polysteribox® L + XL
€29,00
Autoclave deodorant Anabac® natural | Type: Coconut, Description: Natural coconut fragrance
Brand: interscienceAvailable in 3 variantsAnabac® natural is an autoclave deodorant with 100% natural perfume, obtained from natural extracts. The ball dissolves without residue during autoclaving and the perfume is released. Autoclaving processes are not affected. Compatible with all autoclavesBiodegradableECOCERT certified according to the COSMOS standardAutoclave deodorant Anabac® natural | Type: Coconut, Description: Natural coconut fragrance
€93,60
Autoclave deodorant Anabac® | Type: Classic, Description: Eucalyptus fragrance
Brand: interscienceAvailable in 5 variantsLaboratories are very concerned about hygiene, cleanliness and comfort in the workplace. Try Anabac® autoclave deodorant balls to improve the working environment in the laboratory. These autoclave deodorant balls bring a discrete scent that speaks of cleanliness.You can find ordering information for all articles described above as well as other articles online.Autoclave deodorant Anabac® | Type: Classic, Description: Eucalyptus fragrance
€92,30
Autoclaving baskets Nalgene™
Brand: Thermo Elect.LED GmbH (Nalge)Available in 3 variantsWhite. Suitable for cleaning and autoclaving laboratory articles. Smooth surface prevents scratching of plastic or glassware. With lid. Stackable.Autoclaving baskets Nalgene™
€31,33
Bowie-Dick Test Pack | Description: Bowie-Dick-Test (7 kg)
Brand: PMS TIP TEKNOLOJILERIAvailable in 2 variantsThese Bowie-Dick Test Packs are pre-assembled, single use test packs designed to evaluate the performance of the air removal system of pre-vacuum assisted sterilisers in compliance with EN 285 and operating at 134 °C and 3.5 minutes. An indicator sheet printed with water based, non-toxic chemical indicator is placed in the center of each pack. The uniform colour change of the indicator after steam sterilisation indicates that all air was removed and replaced by steam. The backside of the indicator sheet contains fields to be filled out and it can be kept as a permanent record for traceability purposes.Disposable, pre-assembled and ready to use test packsDesigned for STEAM sterilization at 134 °C - 3.5 minutes.Clean and accurate indicator color changeIndicator sheet can be kept as a permanent recordValidated for 4 kg and 7 kg sterilisation loadManufactured in absence of lead or other heavy metalsBowie-Dick Test Pack | Description: Bowie-Dick-Test (7 kg)
€131,65
Indicator tape for steam, hot air and gas sterilisation | With: Steam indicator, strongly adhesive, for non-woven fabric, colour change: white / black, Width mm: 25
Brand: Key Surgical GmbHAvailable in 5 variantsCrepe paper, adhesive. With indicator. Colour changes according to DIN EN ISO 11140-1. Rolls of 50 m.Indicator tape for steam, hot air and gas sterilisation | With: Steam indicator, strongly adhesive, for non-woven fabric, colour change: white / black, Width mm: 25
€5,17
Multiparameter Indicator 3M™ Comply™ | Description: Comply™ 1251 EO Chemical Indicator Strip
Brand: 3M Deutschland GmbHAvailable in 2 variantsClass 4 indicators with endpoint reaction. With chemical coating, change their colour when the sterilization cycle is successfully completed. Indicator strips for steam sterilization or ethylene oxide sterilization.Steam sterilization colour change from yellow to blackEO sterilization colour change from red to greenEconomical due to the possibility of cutting in halfComplies with EN ISO 11140-1Multiparameter Indicator 3M™ Comply™ | Description: Comply™ 1251 EO Chemical Indicator Strip
€61,50
polySteribox® sterilisation containers with permanent filter | Type: polySteribox® SH, External dimensions (W x D x H) mm: 208 x 111 x 54, Internal dimensions (W x D x H) mm: 177 x 76 x 45
Brand: Ritter GmbHThe polySteribox® from Ritter Medical for sterilisation of instruments, storage and transportation of sterile goods is a secure solution in line with the requirements of validated processes in sterile goods provision. The polySteribox® is available in 4 different standardized sizes (SH, M, L and XL) which are suitable for all current sterilisation automats. polySteribox® is produced out of a transparent, dimensionally stable and high temperature resistant (up to 150 degrees celcius) material. It is therefore suitable for autoclave vacuum sterilisation at 121°C or 134°C depending on the sterilisation method recommended by relevant authorities such as the Robert Koch Institute in Germany. In addition the polySteribox® can be used for plasma sterilisation (STEARRAD®) as well as for gas sterilisation (formaldehyde and ethylene oxide) at a maximum of 65°C. Lid and bottom close hermetically and include a built-in bacteria barrier. The patented interlocking system is compatible within all different models and prevents from accidental opening of the box. The boxes are space-saving and easy to stack, therefore they are well suited for storage of sterile goods.polySteribox® sterilisation containers with permanent filter | Type: polySteribox® SH, External dimensions (W x D x H) mm: 208 x 111 x 54, Internal dimensions (W x D x H) mm: 177 x 76 x 45
€113,50
Screw Cap GL 45 thermocouple holder, DURAN® | Description: Screw Cap GL 45 thermocouple holder
Brand: DWK Life Sciences GmbH (Duran)The DURAN® Screw Cap GL 45 thermocouple holder consists of a holder fitted into a blue DURAN® polypropylene GL 45 cap that accepts up to three separate thermocouple wires used in autoclaves or sterilizers.Applications"Loaded Chamber heat penetration" tests during Performance Qualification (PQ)Routine sterilization /autoclave cyclesPerformance tests after autoclave maintenance or repairFeaturesUsable with DURAN® original GL 45 laboratory bottles (1000 ml or less).The 240 mm PTFE tube may be cut to lengthSuitable for holding up to three separate thermocouple wires (Conductor sizes 1/0.3 mm, 1/0.5 mm or 7/0.2 mm)Retrace code for product traceability and downloadable certificateScrew Cap GL 45 thermocouple holder, DURAN® | Description: Screw Cap GL 45 thermocouple holder
€158,32
Screw Cap GL 45 with temperature probe holder, DURAN® | Type: Screw Cap GL 45
Brand: DWK Life Sciences GmbH (Duran)The DURAN® temperature probe holder GL 45 consists of a stainless steel holder that is permanently fitted into a blue DURAN® polypropylene GL 45 cap. The holder will accept the 6.0 mm metal temperature measuring probes that are commonly used in laboratory autoclaves and sterilizers.ApplicationsRoutine sterilization /autoclave cycles"Loaded Chamber heat penetration" tests during Performance Qualification (PQ)Performance tests after autoclave maintenance or repairFeaturesUsable with DURAN® original GL 45 laboratory bottles (1000 ml or less).The depth of the probe can be adjusted to suit the bottle sizeAdjustable ferrule suitable for 6.0 mm diameter probesRetrace code for product traceability and downloadable certificateEasy positioning of the sensor in the middle of the bottleScrew Cap GL 45 with temperature probe holder, DURAN® | Type: Screw Cap GL 45
€122,39
Spare parts for polySteribox® | Type: Lid for box L
Brand: Ritter GmbHAvailable in 12 variantsSpare parts for polySteribox® | Type: Lid for box L
€67,00
Steam Indicator Strips | Description: Steam Indicator Strips (Class 4), Package contents: 1 x 500
Brand: PMS TIP TEKNOLOJILERIAvailable in 2 variantsClass 4 Multi-Variable Steam Indicator StripsClass 4 Multi-Variable Steam indicator strips are designed to be used in steam sterilizers operating at 134 °C -3.5 minutes. The indicator strips can be used in every pack and will provide assurance of steam penetration into the packs.The water based and non-toxic chemical indicator in compliance with ISO 11140-1 will show a clear and accurate color change from blue to black after successful steam sterilization. PMSSteriTest indicator strips are cost effective and can be divided into two separate pieces for more economical use.Dual Strip designDesigned for STEAM sterilization at 134 °C - 3.5 minutes.Water based, non-toxic chemical indicator comply to ISO 11140-1Clear and accurate color change from blue to blackManufactured in absence of lead or other heavy metalsClass 6 Emulating Steam Indicator StripsClass 6 Emulating Steam indicator strips are designed to be used in steam sterilizers operating at 121 °C -15 minutes and 134 °C -3.5 minutes. The cycle verification indicators can be used in every pack and will provide assurance of steam penetration into the packs and presence of all critical parameters of steam sterilization cycle. The water based and non-toxic chemicalindicator in compliance with ISO 11140-1 will show a clear and accurate color change from blue to lilac after successful steam sterilization.Single Strip designDesigned for STEAM sterilization at 134 °C - 3.5 minutes.Designed for STEAM sterilization at 121 °C - 15 minutes.Water based, non-toxic chemical indicator comply to ISO 11140-1Clear and accurate color change from blue to lilacManufactured in absence of lead or other heavy metalsSteam Indicator Strips | Description: Steam Indicator Strips (Class 4), Package contents: 1 x 500
€17,53
Copyright © 2024 - Achrom nv - BE 0445.025.508 | General terms | Cookiebeleid | Privacybeleid | Handcrafted by CrayonCru®