Please wait

Your message is being sent

An error occurred

Analytical measurement and testing

Chromatography

Cleaning and sterilisation

Cleanroom

Distillation, separation, filtration

Environmental-, soil-, water-, food analysis

General laboratory consumables

Heating and cooling technology

Life sciences

Liquid handling

Occupational safety, security

Optical instruments and microscopes

Sample preparation

Stirring, shaking, mixing

Vacuum technology, drying, dry storage

180181182183184185
Coating thickness gauge, digital, TE-F | Measuring range µm: 100/1250, Readability: 0,1/1 µm, Dimensions (WxDxH): 131 x 65 x 28 mm
Coating thickness gauge, digital, TE-F | Measuring range µm: 100/1250, Readability: 0,1/1 µm, Dimensions (WxDxH): 131 x 65 x 28 mm
Brand: Kern & Sohn GmbHFor non-magnetic coatings on iron and steel. The Offset-Accur function allows you to adjust the instrument precisely on the locally measured range by a two-point calibration. This results in a higher accuracy of approx. 1 % of the measured value.Selectable measuring units: µm, mlAuto-Power-OffBattery operationData interface RS-232Scope of supply: Coating thickness gauge, external sensor, base plate, calibration foils, carrying case
€410,00
Coating thickness gauge, digital, TE-FN | Measuring range µm: 100/1250, Readability: 0,1/1 µm, Dimensions (WxDxH): 131 x 65 x 28 mm
Coating thickness gauge, digital, TE-FN | Measuring range µm: 100/1250, Readability: 0,1/1 µm, Dimensions (WxDxH): 131 x 65 x 28 mm
Brand: Kern & Sohn GmbHFor non-magnetic coatings on iron and steel and coatings on non-magnetic metals. The Offset-Accur function allows you to adjust the instrument precisely on the locally measured range by a two-point calibration. This results in a higher accuracy of approx. 1 % of the measured value.Selectable measuring units: µm, mlAuto-Power-OffBattery operationData interface RS-232Scope of supply: Coating thickness gauge, external sensor, base plate, calibration foils, carrying case
€520,00
Coating thickness gauges, digital, TB-F | Measuring range µm: 100/2000, Readability: 0,1/1 µm, Dimensions (WxDxH): 161 x 69 x 32 mm
Coating thickness gauges, digital, TB-F | Measuring range µm: 100/2000, Readability: 0,1/1 µm, Dimensions (WxDxH): 161 x 69 x 32 mm
Brand: Kern & Sohn GmbHAvailable in 2 variantsFor measuring of non-magnetic coatings on iron and steel. The Offset-Accur function allows you to adjust the instrument precisely on the locally measured range by a two-point calibration. This results in a higher accuracy of approx. 1 % of the measured value.Selectable measuring units: µm, inch (mil)Auto-Power-OffBattery operationScope of supply:Coating thickness gauge, external sensor, base plate, calibration foils, carrying case
€325,00
Coating thickness gauges, digital, TB-FN | Measuring range µm: 100/1000, Readability: 0,1/1 µm, Dimensions (WxDxH): 161 x 69 x 32 mm
Coating thickness gauges, digital, TB-FN | Measuring range µm: 100/1000, Readability: 0,1/1 µm, Dimensions (WxDxH): 161 x 69 x 32 mm
Brand: Kern & Sohn GmbHFor measuring of non-magnetic coatings on iron and steel and coatings on non-magnetic metals. The Offset-Accur function allows you to adjust the instrument precisely on the locally measured range by a two-point calibration. This results in a higher accuracy of approx. 1 % of the measured value.Selectable measuring units: µm, inch (mil)Auto-Power-OffBattery operationScope of supply:Coating thickness gauge, external sensor, base plate, calibration foils, carrying case
€455,00
Coating thickness gauges, digital, TF | Measuring range µm: 100/1250, Readability: 0,1/1 µm, Dimensions (WxDxH): 126 x 65 x 35 mm
Coating thickness gauges, digital, TF | Measuring range µm: 100/1250, Readability: 0,1/1 µm, Dimensions (WxDxH): 126 x 65 x 35 mm
Brand: Kern & Sohn GmbHFor non-magnetic coatings on iron and steel and coatings on non-magnetic metals. The Offset-Accur function allows you to adjust the instrument precisely on the locally measured range by a two-point calibration. This results in a higher accuracy of approx. 1 % of the measured value.LCD display, backlitScan mode allows continuous measurement or single point measuring modeMini Statistics Kit: displays the measured result, the average value and the max and the min valueInternal memory up to 99 valuesSelectable measuring units: µm, inch (mil)Data interface RS-232Scope of supply:Coating thickness gauge, base plate, calibration foils, carrying case
€600,00
Coating thickness gauges, digital, TG | Measuring range µm: 100/1250, Readability: 0,1/1 µm, Dimensions (WxDxH): 126 x 65 x 35 mm
Coating thickness gauges, digital, TG | Measuring range µm: 100/1250, Readability: 0,1/1 µm, Dimensions (WxDxH): 126 x 65 x 35 mm
Brand: Kern & Sohn GmbHFor non-magnetic coatings on iron and steel and coatings on non-magnetic metals. The Offset-Accur function allows you to adjust the instrument precisely on the locally measured range by a two-point calibration. This results in a higher accuracy of approx. 1 % of the measured value.LCD display, backlitScan mode allows continuous measurement or single point measuring modeMini Statistics Kit: displays the measured result, the average value and the max and the min valueInternal memory up to 99 valuesSelectable measuring units: µm, inch (mil)Data interface RS-232Scope of supply:Coating thickness gauge, external sensor, base plate, calibration foils, carrying case
€600,00
COD cooling trough | Type : KW 24/N, Description : Cooling trough for E 12/BV insert frame
COD cooling trough | Type : KW 24/N, Description : Cooling trough for E 12/BV insert frame
Brand: Behr Labor-Technik GmbHAvailable in 5 variantsThe cooling trough prevents the overheating of the COD samples during the critical addition of sulphuric acid. In addition, it is used to cool the samples after the heating phase.
€641,60
COD magnetic stirrer | Type : IMR, Description : COD magnetic stirrer for 1 reaction vessel
COD magnetic stirrer | Type : IMR, Description : COD magnetic stirrer for 1 reaction vessel
Brand: Behr Labor-Technik GmbHThe continuously adjustable COD series magnetic stirrer with 12 stirring points is used to mix the samples during the metering process. Due to its watertight casing and also its external power supply and control, it is suitable for use under water.
€470,30
COD magnetic stirrer | Type : SM/12N, Description : Series magnetic stirrer for E 12/B insert
COD magnetic stirrer | Type : SM/12N, Description : Series magnetic stirrer for E 12/B insert
Brand: Behr Labor-Technik GmbHThe continuously adjustable COD series magnetic stirrer with 12 stirring points is used to mix the samples during the metering process. Due to its watertight casing and also its external power supply and control, it is suitable for use under water.
€1.713,50
COD measuring station MD 200 | Type: MD 200
COD measuring station MD 200 | Type: MD 200
Brand: Tintometer GmbHAccording to ISO 15705. This measuring station from Lovibond® allows the accurate, rapid, and economical determination of meaningful waste water COD levels (Chemical Oxygen Demand). Easy operation, even by unskilled operators. Comprises of COD photometer, 25 tube tests covering lower measuring ranges, a reactor block for sample digestion and a tube stand. Waterproof acc. to IP 68, 1 hour at 0.1 meter.Scope of supply: Instrument in carrying case, 4 batteries (AA), adapter for round vials diam. 16 mm, 2 sets of tube tests 0-150 mg/l and 0-1500 mg/l, thermoreactor RD 125, tube stand, 2 syringes, instruction manual.
€1.685,40
COD metering funnel | Type : DT 30, Description : metering funnel, 30 ml, for sulphuric acid
COD metering funnel | Type : DT 30, Description : metering funnel, 30 ml, for sulphuric acid
Brand: Behr Labor-Technik GmbHCOD metering funnels, placed on top of the COD reaction vessels, simplify the addition of sulphuric acid to several samples simultaneously.COD metering funnel together with a cooling trough and a series magnetic stirrer increase the safety and offer considerable relief to the user when determining the COD.
€69,60
COD sample digestion units PA-CSB | Type : PA-CSB 12
COD sample digestion units PA-CSB | Type : PA-CSB 12
Brand: Behr Labor-Technik GmbHAvailable in 2 variantsUnit configuration for simultaneous digestion of maximum 6 or 12 COD samples in acc. with ISO, DIN etc.A digestion unit consists of the following components:TRS 300 microprocessor-controlled time and temperature control unit with COD programCSB/E Precision heating block for RG 2 reaction vesselsE/B Insert and yoke type frame for RG 2 reaction vesselsKW/N Cooling trough with holder and stands for E/BRG 2 Reaction vesselsLK 1 COD air coolersLS Air cooler stands for LK COD air coolers
€5.331,00
180181182183184185

Copyright © 2026 - Achrom nv - BE 0445.025.508    |    General terms    |    Cookiebeleid    |    Privacybeleid    |    Handcrafted by CrayonCru®

Our website uses cookies.
Both we and our third-party partners use cookies. Some are strictly necessary for the site to function, but there are also optional cookies.

Necessary and functional cookies are always on. If you click "accept all cookies", you also accept the optional cookies. You can choose which cookies you want to enable via "set preferences".

Our website uses cookies.
What are cookies? What cookies do we use and why? Read more in our cookie policy

Necessary cookies

Cookies that are indispensable for your visit to the Website and the correct use thereof

Functional cookies

Cookies that make it easier and more pleasant for you to visit the Website, for example by personalising your browsing experience.

Performance cookies

Cookies that collect information about your use of the Website in order to improve the content of the Website and adapt it to the wishes of the User.

Third-party cookies

Cookies placed by third parties who offer their own services via the Website, such as social media, advertisements or video services.