Accessories for Bath Systems IKA | Type: Ball valve, opens completely, M16x1
Brand: IKA-Werke GmbH & Co.KGAvailable in 4 variantsAccessories for Bath Systems IKA | Type: Ball valve, opens completely, M16x1
€115,00
Accessories for hose connections M16x1 | Accessories: Adaptor 90°
Brand: Peter Huber KältemaschinenbauAvailable in 16 variantsAccessories for hose connections M16x1 | Accessories: Adaptor 90°
€105,00
Bath fluid Polyclear Mix 30 Plus | Type: Polyclear Mix 30 Plus, Temp. range °C: 5 ... 90, Capacity l: 1.9
Brand: PolySciencePrevents premature rusting and the growth of algae. Ideal for use in circulators, water baths, shaking water baths or heating baths. For routine applications from 5 to 90 °C.Bath fluid Polyclear Mix 30 Plus | Type: Polyclear Mix 30 Plus, Temp. range °C: 5 ... 90, Capacity l: 1.9
€174,76
Bath liquids for thermostatic baths | Type: Synth 60, Capacity l: 5, Temp. range °C: -50 ...45
Brand: Thermo Elect.LED GmbH (HaakeTCAvailable in 12 variantsBath liquids.Use of the appropriate liquids for heat transfer listed here offers many advantages:Safe to use, non toxic, and generally odourless formulationsResistance to ageing and viscosity changes with low susceptibility to corrosion.Silicone oils (SIL).Non-flammable, with long operational life.Synthetic heat transfer fluids (Synth).Usually formulated from a hydrocarbon base with low viscosity within the recommended working temperature range.Viscosity.For optimal temperature stability the bath fluid must be of low viscosity.Fire point.Fluids can spontaneously ignite above a certain temperature. EN 61010 stipulates that the maximum working temperature of the liquid should be 25 °C below its' fire point.Heating up range.Prolonged use is not permitted as the self-heating effect within these liquids may cause the overtemperature protection system of the pump unit to operate and shut down the pump.Operating temperature range.Thermostats may only be operated for an extended time in this range under certain conditions. Viscosity must not exceed 30 mPas. Otherwise pumps will not achieve their stated performance figures.Working temperature range.The long-term use range for peak thermostatic bath performance. Maximum viscosity level is approx. 5 mPas.Bath liquids for thermostatic baths | Type: Synth 60, Capacity l: 5, Temp. range °C: -50 ...45
€255,00
Beakers, glass, jacketed wiht PTFE-Olive, type T-GL | Capacity ml: 250, Thread GL: 14, Int. diam. mm: 55
Brand: KGW Schieder GmbHAvailable in 3 variantsDURAN®. For heating and cooling liquids. Thermostatting liquid is circulating between the double walls of the beaker jacket. With glass-screw connections GL14 with PTFE olives (O.D. 9mm, T-GL2000 with GL18 and O.D. 11mm) for thermostat hoses. Coolant ram pressure: 0.5bar at maximum, operating temperature: +120°C at maximum. Special sizes available on request.Beakers, glass, jacketed wiht PTFE-Olive, type T-GL | Capacity ml: 250, Thread GL: 14, Int. diam. mm: 55
€118,14
Beakers, glass, jacketed, type T | Capacity ml: 2000, Int. diam. mm: 112, Outer diam. mm: 135
Brand: KGW Schieder GmbHAvailable in 3 variantsDURAN®. For heating and cooling liquids. Thermostatting liquid is circulating between the double walls of the beaker jacket. With glass olives (O.D. 12mm) for thermostat hoses. Coolant ram pressure: 0.5bar at maximum, operating temperature: +300°C at maximum. Special sizes available on request.Beakers, glass, jacketed, type T | Capacity ml: 2000, Int. diam. mm: 112, Outer diam. mm: 135
€288,25
External Pt100 Sensors | Description: Extension cable Pt100, length 3 m
Brand: Peter Huber KältemaschinenbauAvailable in 8 variantsFor external thermoregulation applications, standard cable length 1.5 mExternal Pt100 Sensors | Description: Extension cable Pt100, length 3 m
€255,00
Function upgrade for Huber circulators | Type: E-grade® "Exclusive"
Brand: Peter Huber KältemaschinenbauAvailable in 2 variantsE-grade - innovative activation keys for the functionality to suit your budget and process requirementsEvery application requires particular functions. If the circulator is to be used in a range of applications it will generally require greater functionality. The required functionality grows with the complexity of the application. The innovative "E-grade" has the answer. Models with the Pilot ONE Controller have a comprehensive range of functions suited to the classical temperature control applications. The E-grade allows the functionality to be extended at any time to suit new process requirements and budget. E-grade stands for electronic upgrade and it is simple to do: To extend the functionality a unit specific code is entered via the controller. This code is specific to the serial number of the unit and is either already entered at the factory for new units or it can be activated at a later date. The code is sent by email. There is no requirement for a hardware or software update.The E-grade "Explore" for Unistats is more than just another functions package. It makes important information available to users of Unistat temperature control systems. Temperature values and temperature differentials as well as for the actual heating power, cooling power and pump power within the system are displayed on the touch-panel. E-grade "Explore" is an evolution of the existing Unistat technology. Existing sensors are utilised to make important process temperature and power data visible. In addition to making the data visible on the display of the device, it can also be accessed via the digital interfaces for further processing. Application examples for E-grade® "Explore": Process and product development and optimisation Use-Tests of raw materials, quality control Enhanced data collection for scale-up trialsFunction upgrade for Huber circulators | Type: E-grade® "Exclusive"
€440,00
Heat transfer liquid Aqua 90 | Type: Aqua 90, Capacity: 5 l, Temperature: 5 ... 90 °C
Brand: Lauda Dr.R.Wobser GmbH & Co.KGAvailable in 3 variantsWater-based heat transfer liquid. Ideal for applications in open temperature control systems for non-flammable liquids. Stabilized against contamination.Heat transfer liquid Aqua 90 | Type: Aqua 90, Capacity: 5 l, Temperature: 5 ... 90 °C
€50,30
Heat transfer liquid Kryo 20 | Type: Kryo 20, Capacity: 20 l, Temperature: -20 ... 170 °C
Brand: Lauda Dr.R.Wobser GmbH & Co.KGAvailable in 3 variantsHeat transfer liquid based on silicone oil. Ideal for applications in baths and open temperature control circuits.Chemically inert and environmentally friendly synthetic silicone oilNon-corrosiveConforms with REACH and RoHsNot suitable for use with silicone tubing.Heat transfer liquid Kryo 20 | Type: Kryo 20, Capacity: 20 l, Temperature: -20 ... 170 °C
€2.070,00
Heat transfer liquid Kryo 30 | Type: Kryo 30, Capacity: 20 l, Temperature: -30 ... 90 °C
Brand: Lauda Dr.R.Wobser GmbH & Co.KGAvailable in 3 variantsHeat transfer liquid with high heat capacity. Ideal for applications in open and closed temperature control circuits.Water-glycol mixture with very good frost resistanceConforms with REACH and RoHsDo not use on devices with cascade cooling.Heat transfer liquid Kryo 30 | Type: Kryo 30, Capacity: 20 l, Temperature: -30 ... 90 °C
€601,00
Heat transfer liquid Kryo 51 | Type: Kryo 51, Capacity: 10 l, Temperature: -50 ... 120 °C
Brand: Lauda Dr.R.Wobser GmbH & Co.KGAvailable in 3 variantsHeat transfer liquid based on silicone oil. Ideal for applications in baths and open temperature control circuits.Chemically inert and environmentally friendly synthetic silicone oilLow viscosity, for temperatures below 0 °CConforms with REACH and RoHsNot suitable for use with silicone tubing.Heat transfer liquid Kryo 51 | Type: Kryo 51, Capacity: 10 l, Temperature: -50 ... 120 °C
€851,00
Copyright © 2024 - Achrom nv - BE 0445.025.508 | General terms | Cookiebeleid | Privacybeleid | Handcrafted by CrayonCru®