Please wait

Your message is being sent

An error occurred

behrotest® Multi-sample Extractors for Twisselmann Extraction | Type : R 104 T-FB, Description : complete for 4 positions at the same time with plunger, 250 ml, FB execution (larger heating surface)
behrotest® Multi-sample Extractors for Twisselmann Extraction | Type : R 104 T-FB, Description : complete for 4 positions at the same time with plunger, 250 ml, FB execution (larger heating surface)
Brand: Behr Labor-Technik GmbHAvailable in 5 variantsEconomical and user-friendly units for extraction in accordance with Twisselmann:each sample position is individually adjustablecooling water distributor ensures an even cooling at all sample positionspractical stand for holding the condensers securely between the extractionsmounts for holding the spacers after the removal of the sample containers
€3.029,00
behrotest® waste water mixers | Type : QMR 5, Capacity ml : 5000
behrotest® waste water mixers | Type : QMR 5, Capacity ml : 5000
Brand: Behr Labor-Technik GmbHAvailable in 5 variantsbehrotest ® homogenisers. With transportable sample vessels. Homogenisers for pre-treatment, splitting and homogenization of heterogeneous water samples in accordance with the quality assurance and quality control standards for wastewater examinations. The vessels of the homogenizers are protected against damage in the yolk type frame and can be carried easily by the two handles. They can be filled at the sampling location by a flattened inlet connection. Capacities from 2 to 25 l permit extraction and collection of multiple samples. Exact measurement of the sample quantities due to graduation. Subsequently, the transport rack is just placed on the magnetic stirrer in the laboratory or in the sampling vehicle and the homogeniser is immediately ready for use. The speed of the magnetic stirrer can be adjusted by a controller. The user can thus comply with the specified cone height in all cases. Oxygen is thus prevented from entering the samples. Dosed extraction of the homogenised sample via PTFE spindle stopcock. 12V, with adapter for mains connection.
€1.282,00
behrotest® water samplers | Type: PT 1000, Description: With PTFE beaker
behrotest® water samplers | Type: PT 1000, Description: With PTFE beaker
Brand: Behr Labor-Technik GmbHAvailable in 5 variantsFor sampling from the water surface.Adjustable clamping device and end rod made of stainless steel, with choice of sample container as indicated. For sampling in accordance with DIN 38409 to H14/AOX a 1 litre borosilicate beaker is required. With 3-part handle, which is continuously adjustable between 1 and 3,75m. Ideal for use at sites which are difficult to access.
€438,10
Bell jars, DURAN® | Height mm: 250, Ø mm: 185, Overall height mm: 300
Bell jars, DURAN® | Height mm: 250, Ø mm: 185, Overall height mm: 300
Brand: DWK Life Sciences GmbH (Duran)Available in 3 variantsWith ground joint neck, for vacuum use.
€244,80
Bellows | Type: Bellows
Bellows | Type: Bellows
Brand: Deutsch & Neumann GmbHFor Orsat apparatus. Non-rigid PVC. Red-brown. Complete with valve.
€21,69
Bellows, PTFE | Overall length mm: 120, Cone NS: 29/32, Socket NS: 29/32
Bellows, PTFE | Overall length mm: 120, Cone NS: 29/32, Socket NS: 29/32
Brand: Bohlender GmbHAvailable in 2 variantsStrainless connection of ground joint equipment; for compensating vibrations from vacuum pumps; for length compensation of heated columns; angular misalignment.Made of PTFE, with sharp folds and sealing rings on the outside; maximum deflection: 120°.
€54,34
Bench balances FXN | Type: FXN 10K-3N, Max. load: 15 kg, Readability: 0.002 kg
Bench balances FXN | Type: FXN 10K-3N, Max. load: 15 kg, Readability: 0.002 kg
Brand: Kern & Sohn GmbHAvailable in 8 variantsSuitable for the increased hygienic requirements in the food industries. Thanks to battery operation, compact, lightweight construction, it is suitable for the use in several locations. A visual and audible signal helps with portioning, dispensing or grading.Large backlit LCD displayRecessed grips on the underside for easy transportation
€460,00
Bench protection paper, LabSorb | Type: Sheets, Width mm: 460, Length cm: 57
Bench protection paper, LabSorb | Type: Sheets, Width mm: 460, Length cm: 57
Brand: Ahlstrom-Munksjö Germany GmbHAvailable in 5 variantsLabSorb is two-layered: The top layer is a quality filter paper to enable rapid absorption of spilt liquids. The bottom layer is polyethylene-coated and protects the surface underneath from contamination and damage.
€146,86
Bench protector, Labmat™ | Width mm: 508, Length m: 15.2
Bench protector, Labmat™ | Width mm: 508, Length m: 15.2
Brand: Bel-Art ProductsWhite. Labmat™ Bench Liner speeds clean-up and safeguards work surfaces from stains, spills and wear. Highly absorbent upper surface. Flexible polyethylene film backing is non-skid and prevents soak-through of most solutions. Simply roll up and discard after contamination.
€136,03
Bench protectors, PTFE | Width mm: 300, Length mm: 1000, Thickness mm: 0.25
Bench protectors, PTFE | Width mm: 300, Length mm: 1000, Thickness mm: 0.25
Brand: Bohlender GmbHAvailable in 14 variantsIdeal for using as table pad or for lining drawers. Also suitable for using as slideway or for insulation. White foil with universal chemical resistance, temperature resistance from -200 to 250 °C.Rolls of 1 m.
€20,75
Bench scales FCB | Type: FCB 12K1, Max. load: 12 kg, Readability: 1 g
Bench scales FCB | Type: FCB 12K1, Max. load: 12 kg, Readability: 1 g
Brand: Kern & Sohn GmbHAvailable in 9 variantsBench scale with second display on the backside of the scale.Backlit LCD displayPRE-TARE functionBattery or rechargeable battery operation (optional)Compact and flat constructionLow weightRS-232 data interface, standardScope of supply:Bench scale, universal mains adapter, protective working cover
€220,00
Bench scales FKB | Type: FKB 65K0.2, Max. load: 65 kg, Readability: 0,2 g
Bench scales FKB | Type: FKB 65K0.2, Max. load: 65 kg, Readability: 0,2 g
Brand: Kern & Sohn GmbHAvailable in 11 variantsHigh resolution bench scale with large weighing range and robust stainless steel weighing plate for high-precision weighing in the industrial field. Retrofitting of interfaces is possible by plugging in the KUP interface adapter without opening the scale housing. The interface adapters enable convenient transmission of the weighing data to networks, PCs, smartphones, tablets, laptops, printers etc.Large backlit LCD displayRobust plastic die-cast housingPRE-TARE functionKERN Communication Protocol (KCP): Searching and remote control of the balance using external control devices and computersFreely programmable weighing unitOptional battery operation, 4 x 1.5 V AA (not included), operating time up to 20 hScope of supply:Bench scale, universal mains adapter, protective working cover
€525,00

Our website uses cookies.
Both we and our third-party partners use cookies. Some are strictly necessary for the site to function, but there are also optional cookies.

Necessary and functional cookies are always on. If you click "accept all cookies", you also accept the optional cookies. You can choose which cookies you want to enable via "set preferences".

Our website uses cookies.
What are cookies? What cookies do we use and why? Read more in our cookie policy

Necessary cookies

Cookies that are indispensable for your visit to the Website and the correct use thereof

Functional cookies

Cookies that make it easier and more pleasant for you to visit the Website, for example by personalising your browsing experience.

Performance cookies

Cookies that collect information about your use of the Website in order to improve the content of the Website and adapt it to the wishes of the User.

Third-party cookies

Cookies placed by third parties who offer their own services via the Website, such as social media, advertisements or video services.