Please wait

Your message is being sent

An error occurred

Bench-top stand for waste disposal bags | Description: For waste disposal bags (200 x 300 mm), Int. diam. mm: 150, Height mm: 250
Bench-top stand for waste disposal bags | Description: For waste disposal bags (200 x 300 mm), Int. diam. mm: 150, Height mm: 250
Brand: Ratiolab GmbHAvailable in 2 variantsPlastic coated iron. With non-slip rubber feet.
€11,99
Benchkote surface protector®
Benchkote surface protector®
Brand: Cytiva Europe GmbHAvailable in 3 variantsThe upper side consists of a particularly absorbent filter paper, the lower side is a non-permeable, chemically resistant PE layer. This combination makes Benchkote into a protective paper with a particularly high wet strength for universal use, helping to meet the requirements of Good Laboratory Practice (GLP):Completely absorbs escaped liquidsPrevents spills from reaching the workbenchProtects against contaminationApplications:Surface protection for lab workbenches, trays or chemical cabinetsContamination protection, e. g. in isotope or bacteriological labsAdsorption of toxic or radioactive substancesHygienic protection in animal cagesAtmospheric regulation in humidity chambers
€308,00
Benchkote surface protector® | Description: Sheets, Width: 460 mm, Length: 0.57 m
Benchkote surface protector® | Description: Sheets, Width: 460 mm, Length: 0.57 m
Brand: Cytiva Europe GmbHAvailable in 7 variantsThe upper side consists of a particularly absorbent filter paper, the lower side is a non-permeable, chemically resistant PE layer. This combination makes Benchkote into a protective paper with a particularly high wet strength for universal use, helping to meet the requirements of Good Laboratory Practice (GLP):Completely absorbs escaped liquidsPrevents spills from reaching the workbenchProtects against contaminationApplications:Surface protection for lab workbenches, trays or chemical cabinetsContamination protection, e. g. in isotope or bacteriological labsAdsorption of toxic or radioactive substancesHygienic protection in animal cagesAtmospheric regulation in humidity chambers
€145,65
Benchtop centrifuge 336/336R | Type: C0336
Benchtop centrifuge 336/336R | Type: C0336
Brand: Corning BVAvailable in 2 variantsThese high performance centrifuges are capable of high speed operation. Suitable for industrial, biochemical, medical, veterinary laboratories and basic research. Available as non-refrigerated (C0336) and refrigerated (C0336R) models.100 user programsPassword protectionProgrammable density setting for samples> 1.2 g/cm3 (automatic max. speed correction)Large graphical LC-displayAutomatic lid opening, start blocking at opened lidEmergency lid lock releaseUnbalance sensorMaintenance free induction motorPlease order rotors separately.
€3.762,66
Benchtop centrifuge Heraeus™ Megafuge™ 8 | Description: Heraeus™ Megafuge™ 8
Benchtop centrifuge Heraeus™ Megafuge™ 8 | Description: Heraeus™ Megafuge™ 8
Brand: Thermo Elect.LED GmbH (Kendro)Available in 2 variantsThe small Thermo Scientific™ Heraeus™ Megafuge™ 8 benchtop centrifuge offers high capacity for its small footprint and is very user-friendly. It is available air-cooled or with refrigeration and is suitable for a wide range of clinical and research applications.High capacity with small footprint: 8 x 50 ml conical tubes in swing-out rotor, 24 x 5/7ml blood collection tubes, 30 SpinColumns or up to 4 microtitre platesSafe Auto-Lock™ rotor change at the touch of a button in just 3 secondsCertified aerosol-tight ClickSeal™ lids - can be easily closed and opened with one hand even when wearing glovesVery quiet operation (< 58 dBA with TX-150 rotor) One-touch operation with programme memory and optional password protectionHighly visible display with backlightGlove- and detergent-friendly control panelMultilingual user interfaceMeets the latest clinical standards and safety requirements such as UL and IVDTemperature range of the cooled centrifuge 8R: -10 to 40 °C
€3.000,00
Benchtop centrifuge Megafuge™ ST1 Plus/ST1R Plus (General Use) | Type: ST1R Plus
Benchtop centrifuge Megafuge™ ST1 Plus/ST1R Plus (General Use) | Type: ST1R Plus
Brand: Thermo Elect.LED GmbH (Kendro)Available in 2 variantsScope of supply: Centrifuge, swing-out rotor TX-400, round bucket set, aerosol-tight bucket lids, 4 adapters for conical 50 ml tubes, 4 adapters for conical 15 ml tubes
€13.700,00
Benchtop centrifuge Megafuge™ ST1 Plus/ST1R Plus (IVD) | Type: ST1R Plus (IVD), Description: Blood tube package 3
Benchtop centrifuge Megafuge™ ST1 Plus/ST1R Plus (IVD) | Type: ST1R Plus (IVD), Description: Blood tube package 3
Brand: Thermo Elect.LED GmbH (Kendro)Available in 4 variantsScope of supply:Megafuge™ ST1 Plus-Blood tube package 1: Centrifuge, swing-out rotor TX-400, round bucket set, aerosol-tight bucket lids, 4 adapters for 5/7 ml blood tubes, 4 adapters for 10 ml blood tubesMegafuge™ ST1 Plus-Blood tube package 2: Centrifuge, swing-out rotor H-Flex1, round bucket set, aerosol-tight bucket lids, 2 adapters for 10 ml blood tubes, 2 adapters for microtitre platesMegafuge™ ST1R Plus-Blood tube package 3: Centrifuge, swing-out rotor TX-400, round bucket set, aerosol-tight bucket lids, 4 adapters for 5/7 ml blood tubes, 4 adapters for 10 ml blood tubesMegafuge™ ST1R Plus-Blood tube package 4: Centrifuge, swing-out rotor H-Flex1, round bucket set, aerosol-tight bucket lids, 2 adapters for 10 ml blood tubes, 2 adapters for microtitre plates
€14.000,00
Benchtop centrifuge Multifuge™ X1 Pro/X1R Pro | Type: X1R Pro, Description: Cell culture package 4
Benchtop centrifuge Multifuge™ X1 Pro/X1R Pro | Type: X1R Pro, Description: Cell culture package 4
Brand: Thermo Elect.LED GmbH (Kendro)Available in 4 variantsBenchtop centrifuge for routine applications in the biopharmaceutical sector or in research. The motorised lid lock allows easy closing and locking of the centrifuge lid.Touchscreen displayUp to 100 programme memory locationsRunning time adjustable up to 99 h 59 min 59 sAuto-Lock™ rotor system: Safe, ergonomic push-button rotor exchangeClickSeal® bucket sealing system: Aerosol-tight closing and opening with one handSMARTSpin™ technology: Optimises acceleration and braking and compensates imbalancesUSB interface at the frontAdditional X1R Pro:Temperature range adjustable from -10 °C to 40 °CPre-cooling function with direct buttonStart-up and shut down of the compressor is progammableRefrigerant R-134aScope of supply:Multifuge™ X1 Pro-Cell culture package 1: Centrifuge, swing-out rotor TX-400, round bucket set, aerosol-tight bucket lids, 4 adapters for conical 50 ml tubes, 4 adapters for conical 15 ml tubesMultifuge™ X1 Pro-Cell culture package 2: Centrifuge, swing-out rotor H-Flex1, round bucket set, aerosol-tight bucket lids, 2 adapters for conical 50 ml tubes, 2 adapters for microtitre platesMultifuge™ X1R Pro-Cell culture package 3: Centrifuge, swing-out rotor H-Flex1, round bucket set, aerosol-tight bucket lids, 2 adapters for conical 50 ml tubes, 2 adapters for microtitre platesMultifuge™ X1R Pro-Cell culture package 4: Centrifuge, swing-out rotor H-Flex1, round bucket set, aerosol-tight bucket lids, 2 adapters for conical 50 ml tubes, 2 adapters for conical 15 ml tubes
€15.400,00
Benchtop centrifuge SL1 Plus/SL1R Plus (General Use) | Type: SL1R Plus, Description: Cell culture package 4
Benchtop centrifuge SL1 Plus/SL1R Plus (General Use) | Type: SL1R Plus, Description: Cell culture package 4
Brand: Thermo Elect.LED GmbH (Kendro)Available in 4 variantsScope of supply:SL1 Plus-Cell culture package 1: Centrifuge, swing-out rotor TX-400, round bucket set, aerosol-tight bucket lids, 4 adapters for conical 50 ml tubes, 4 adapters for conical 15 ml tubesSL1 Plus-Cell culture package 2: Centrifuge, swing-out rotor H-Flex1, round bucket set, aerosol-tight bucket lids, 2 adapters for conical 50 ml tubes, 2 adapters for microtitre platesSL1R Plus-Cell culture package 3: Centrifuge, swing-out rotor TX-400, round bucket set, aerosol-tight bucket lids, 4 adapters for conical 50 ml tubes, 4 adapters for conical 15 ml tubesSL1R Plus-Cell culture package 4: Centrifuge, swing-out rotor H-Flex1, round bucket set, aerosol-tight bucket lids, 2 adapters for conical 50 ml tubes, 2 adapters for microtitre plates
€15.900,00
Benchtop centrifuge SL1 Plus/SL1R Plus (IVD) | Type: SL1 Plus (IVD), Description: Blood tube package 2
Benchtop centrifuge SL1 Plus/SL1R Plus (IVD) | Type: SL1 Plus (IVD), Description: Blood tube package 2
Brand: Thermo Elect.LED GmbH (Kendro)Available in 4 variantsScope of supply:SL1 Plus-Bood tube package 1: Centrifuge, swing-out rotor TX-400, round bucket set, aerosol-tight bucket lids, 4 adapters for 5/7 ml blood tubes, 4 adapters for 10 ml blood tubesSL1 Plus-Bood tube package 2: Centrifuge, swing-out rotor H-Flex1, round bucket set, aerosol-tight bucket lids, 2 adapters for 10 ml blood tubes, 2 adapters for microtitre platesSL1R Plus-Bood tube package 3: Centrifuge, swing-out rotor TX-400, round bucket set, aerosol-tight bucket lids, 4 adapters for 5/7 ml blood tubes, 4 adapters for 10 ml blood tubesSL1R Plus-Bood tube package 4: Centrifuge, swing-out rotor H-Flex1, round bucket set, aerosol-tight bucket lids, 2 adapters for 10 ml blood tubes, 2 adapters for microtitre plates
€12.500,00
Benchtop centrifuge Sorvall ST1 Plus/ST1R Plus (General Use) | Type: ST1R Plus
Benchtop centrifuge Sorvall ST1 Plus/ST1R Plus (General Use) | Type: ST1R Plus
Brand: Thermo Elect.LED GmbH (Kendro)Available in 2 variantsScope of supply: Centrifuge, swing-out rotor TX-400, round bucket set, aerosol-tight bucket lids, 4 adapters for conical 50 ml tubes, 4 adapters for conical 15 ml tubes
€13.700,00
Benchtop centrifuge Sorvall ST1 Plus/ST1R Plus (IVD) | Type: ST1 Plus (IVD), Description: Blood tube package 2
Benchtop centrifuge Sorvall ST1 Plus/ST1R Plus (IVD) | Type: ST1 Plus (IVD), Description: Blood tube package 2
Brand: Thermo Elect.LED GmbH (Kendro)Available in 4 variantsScope of supply:Sorvall ST1 Plus-Blood tube package 1: Centrifuge, swing-out rotor TX-400, round bucket set, aerosol-tight bucket lids, 4 adapters for 5/7 ml blood tubes, 4 adapters for 10 ml blood tubesSorvall ST1 Plus-Blood tube package 2: Centrifuge, swing-out rotor H-Flex1, round bucket set, aerosol-tight bucket lids, 2 adapters for 10 ml blood tubes, 2 adapters for microtitre platesSorvall ST1R Plus-Blood tube package 3: Centrifuge, swing-out rotor TX-400, round bucket set, aerosol-tight bucket lids, 4 adapters for 5/7 ml blood tubes, 4 adapters for 10 ml blood tubesSorvall ST1R Plus-Blood tube package 4: Centrifuge, swing-out rotor H-Flex1, round bucket set, aerosol-tight bucket lids, 2 adapters for 10 ml blood tubes, 2 adapters for microtitre plates
€12.500,00

Our website uses cookies.
Both we and our third-party partners use cookies. Some are strictly necessary for the site to function, but there are also optional cookies.

Necessary and functional cookies are always on. If you click "accept all cookies", you also accept the optional cookies. You can choose which cookies you want to enable via "set preferences".

Our website uses cookies.
What are cookies? What cookies do we use and why? Read more in our cookie policy

Necessary cookies

Cookies that are indispensable for your visit to the Website and the correct use thereof

Functional cookies

Cookies that make it easier and more pleasant for you to visit the Website, for example by personalising your browsing experience.

Performance cookies

Cookies that collect information about your use of the Website in order to improve the content of the Website and adapt it to the wishes of the User.

Third-party cookies

Cookies placed by third parties who offer their own services via the Website, such as social media, advertisements or video services.