Please wait

Your message is being sent

An error occurred

Analytical measurement and testing

Chromatography

Cleaning and sterilisation

Cleanroom

Distillation, separation, filtration

Environmental-, soil-, water-, food analysis

General laboratory consumables

Heating and cooling technology

Life sciences

Liquid handling

Occupational safety, security

Optical instruments and microscopes

Sample preparation

Stirring, shaking, mixing

Vacuum technology, drying, dry storage

Tintometer GmbH
123456
Oxygen meter SD 400 Oxi L | Description: SD 400 Oxi L (Set 3)
Oxygen meter SD 400 Oxi L | Description: SD 400 Oxi L (Set 3)
Brand: Tintometer GmbHAvailable in 4 variantsOxygen meter for use in sewage and water works, research and teaching as well as in aquaristics. High measuring accuracy and low maintenance, thanks to luminescence technology no electrolyte solution is required. The SD 400 Oxi L is ideally suited for the determination of "dilution BOD" due to the optimized probe for standard BOD bottles.Especially high measuring accuracy by luminescence technologyShort response time of the oxygen probeLow maintenance due to long-lasting oxygen probe and membrane headInflow to the oxygen probe is not necessary, the use of stirrers or manual stirring is no longer requiredIncludes software for extended and simplified data management with data logger functionBacklit LC display for dark environmentsScope of supply:SD 400 Oxi L (Set 1): Meter with 4 (AA) batteries, optical oxygen probe with 1.5 m cable, storage/calibration bottle, micro SD card with calibration data, software and manual (on Micro SD card), short manual, lanyard in caseSD 400 Oxi L (Set 2): as Set 1 but with optical oxygen probe with 3 m cableSD 400 Oxi L (Set 3): as Set 2 but with optical oxygen probe with 10 m cable
€1.095,20
pH meter SensoDirect pH 110 | Type: SensoDirect pH 110
pH meter SensoDirect pH 110 | Type: SensoDirect pH 110
Brand: Tintometer GmbHThe AL10pH is a portable, battery operated pH meter. The instrument is equipped as standard with protective casing and built-in electrode holder. It is equipped with a LC display showing two decimal places. The gel electrode of the AL10pH is temperature resistant over the range -5 to 80 °C. It is fitted with a BNC connector as standard.Scope of supply: pH meter AL10pH, battery, pH-buffer (4.0 / 7.0), pH plastic electrode Type 226, in case.
€197,10
pH tester Pocket Tester SD10 pH | Type: SD10 pH, Temperature: 0 ... 50 °C, Accuracy temperature: ±0.5 °C
pH tester Pocket Tester SD10 pH | Type: SD10 pH, Temperature: 0 ... 50 °C, Accuracy temperature: ±0.5 °C
Brand: Tintometer GmbHPocket Tester with waterproof housing for measuring pH, mV, and temperature. Ideal for regular checks in industrial plants or swimming pools. With lanyard and clip on the device head.Three-colour LED lighting system (blue, green, red) and display symbols for easy handling3 multifunction buttons with symbolsUp to 3 calibration pointsWith stability indicator, alarm for limits, auto-hold, and auto-off functionTransparent lid for measurement, calibration, and storage of the electrodeOptimised lid design for an upright and stable position of the testerBattery operation (4 x AAA batteries)Easy battery and electrode replacement
€136,00
pH/Redox-Meter SD 305 pH | Type: SD 305 pH/ORP (Set 1)
pH/Redox-Meter SD 305 pH | Type: SD 305 pH/ORP (Set 1)
Brand: Tintometer GmbHAvailable in 2 variantsRobust and waterproof hand-held meter with data logger for field use. For measurements in drinking water, cooling / boiler water, waste water, pool water and surface water.Automatic temperature compensationBuffer recognition of Lovibond® standards (pH 4.01 / 7.00 / 10.01) and buffers according to DIN 19266Choice between 1-, 2- or 3-point calibrationEvaluation of the sensor quality after each calibrationAlarm function with adjustable limitsAuto hold functionBattery status indicatorRedox measurement in mV or mVH according to DIN 38404-6Data transfer and evaluation via software possibleScope of supply:SD 305 pH/ORP (Set 1): Instrument, protective covering with electrode holder, carrying case, pH/Temp. electrode Type 231, pH buffer solution (4.01 / 7.00 / 10.01), storage solution for pH/ORP electrodes, batteries, manualSD 305 pH/ORP (Set 2): Instrument, protective covering with electrode holder, carrying case, pH/Temp. electrode Type 226, temperature probe Pt1000, pH buffer solution (4.01 / 7.00 / 10.01), storage solution for pH/ORP electrodes, batteries, manualSD 305 pH/ORP (Set 3): Instrument, protective covering with electrode holder, carrying case, Redox electrode Type 242, temperature probe Pt1000, ORP control solution (470 mV), storage solution for pH/ORP electrodes, batteries, manual
€729,30
pH/Redox-Meter SD 305 pH | Type: SD 305 pH/ORP (Set 2)
pH/Redox-Meter SD 305 pH | Type: SD 305 pH/ORP (Set 2)
Brand: Tintometer GmbHAvailable in 2 variantsRobust and waterproof hand-held meter with data logger for field use. For measurements in drinking water, cooling / boiler water, waste water, pool water and surface water.Automatic temperature compensationBuffer recognition of Lovibond® standards (pH 4.01 / 7.00 / 10.01) and buffers according to DIN 19266Choice between 1-, 2- or 3-point calibrationEvaluation of the sensor quality after each calibrationAlarm function with adjustable limitsAuto hold functionBattery status indicatorRedox measurement in mV or mVH according to DIN 38404-6Data transfer and evaluation via software possibleScope of supply:SD 305 pH/ORP (Set 1): Instrument, protective covering with electrode holder, carrying case, pH/Temp. electrode Type 231, pH buffer solution (4.01 / 7.00 / 10.01), storage solution for pH/ORP electrodes, batteries, manualSD 305 pH/ORP (Set 2): Instrument, protective covering with electrode holder, carrying case, pH/Temp. electrode Type 226, temperature probe Pt1000, pH buffer solution (4.01 / 7.00 / 10.01), storage solution for pH/ORP electrodes, batteries, manualSD 305 pH/ORP (Set 3): Instrument, protective covering with electrode holder, carrying case, Redox electrode Type 242, temperature probe Pt1000, ORP control solution (470 mV), storage solution for pH/ORP electrodes, batteries, manual
€729,30
pH/Redox-Meter SD 305 pH | Type: SD 305 pH/ORP (Set 3)
pH/Redox-Meter SD 305 pH | Type: SD 305 pH/ORP (Set 3)
Brand: Tintometer GmbHAvailable in 2 variantsRobust and waterproof hand-held meter with data logger for field use. For measurements in drinking water, cooling / boiler water, waste water, pool water and surface water.Automatic temperature compensationBuffer recognition of Lovibond® standards (pH 4.01 / 7.00 / 10.01) and buffers according to DIN 19266Choice between 1-, 2- or 3-point calibrationEvaluation of the sensor quality after each calibrationAlarm function with adjustable limitsAuto hold functionBattery status indicatorRedox measurement in mV or mVH according to DIN 38404-6Data transfer and evaluation via software possibleScope of supply:SD 305 pH/ORP (Set 1): Instrument, protective covering with electrode holder, carrying case, pH/Temp. electrode Type 231, pH buffer solution (4.01 / 7.00 / 10.01), storage solution for pH/ORP electrodes, batteries, manualSD 305 pH/ORP (Set 2): Instrument, protective covering with electrode holder, carrying case, pH/Temp. electrode Type 226, temperature probe Pt1000, pH buffer solution (4.01 / 7.00 / 10.01), storage solution for pH/ORP electrodes, batteries, manualSD 305 pH/ORP (Set 3): Instrument, protective covering with electrode holder, carrying case, Redox electrode Type 242, temperature probe Pt1000, ORP control solution (470 mV), storage solution for pH/ORP electrodes, batteries, manual
€729,30
123456

Copyright © 2026 - Achrom nv - BE 0445.025.508    |    General terms    |    Cookiebeleid    |    Privacybeleid    |    Handcrafted by CrayonCru®

Our website uses cookies.
Both we and our third-party partners use cookies. Some are strictly necessary for the site to function, but there are also optional cookies.

Necessary and functional cookies are always on. If you click "accept all cookies", you also accept the optional cookies. You can choose which cookies you want to enable via "set preferences".

Our website uses cookies.
What are cookies? What cookies do we use and why? Read more in our cookie policy

Necessary cookies

Cookies that are indispensable for your visit to the Website and the correct use thereof

Functional cookies

Cookies that make it easier and more pleasant for you to visit the Website, for example by personalising your browsing experience.

Performance cookies

Cookies that collect information about your use of the Website in order to improve the content of the Website and adapt it to the wishes of the User.

Third-party cookies

Cookies placed by third parties who offer their own services via the Website, such as social media, advertisements or video services.