Please wait

Your message is being sent

An error occurred

Analytical measurement and testing

Chromatography

Cleaning and sterilisation

Cleanroom

Distillation, separation, filtration

Environmental-, soil-, water-, food analysis

General laboratory consumables

Heating and cooling technology

Life sciences

Liquid handling

Occupational safety, security

Optical instruments and microscopes

Sample preparation

Stirring, shaking, mixing

Vacuum technology, drying, dry storage

Tintometer GmbH
123456
Conductivity meter SD 325 CON | Type: SD 325 CON (Set 3)
Conductivity meter SD 325 CON | Type: SD 325 CON (Set 3)
Brand: Tintometer GmbHAvailable in 3 variantsThe portable instrument with data logger is ideal for determining electrical conductivity in aqueous media. With a simple keystroke, further parameters such as TDS, salinity or resistance can be selected and conveniently read off. The selection of different measuring cells allow the determination of low (< 200 µS/cm) and very high conductivities (< 1000 mS/cm) with highest precision.Automatic recognition of conductivity standardsAlarm function with adjustable limit valuesAuto hold functionSelectable reference temperature (20 °C / 25 °C)Automatic temperature compensationBattery status indicatorLow power consumptionData transfer and evaluation via software possibleScope of supply:SD 325 CON (Set 1): Conductivity meter, protective covering, transport case, 4-pol graphite electrode (diam. 12 mm, < 200 mS/cm), conductivity standards, batteries, manualSD 325 CON (Set 2): Conductivity meter, protective covering, transport case, 4-pol graphite electrode (diam. 16 mm, < 1000 mS/cm), conductivity standards, batteries, manualSD 325 CON (Set 3): Conductivity meter, protective covering, transport case, 2-pol stainless steel electrode (diam. 10 mm, < 200 µS/cm, pure water), flow through cell for pure water, batteries, manual
€1.000,20
Conductivity meter SensoDirect Con 110 | Type: SensoDirect Con 110
Conductivity meter SensoDirect Con 110 | Type: SensoDirect Con 110
Brand: Tintometer GmbHThe battery operated SensoDirect Con 110 is a compact and versatile meter. The unit is extremely easy to use and is equipped as standard with a casing and built-in electrode holder. It is equipped with a LC display showing two or three decimal places (manual measuring range selection) and a measuring range either of 0.001 to 1.999 or 0.01 to 19.99 mS/cm. The SensoDirect Con 110 can be calibrated and adjusted using a potentiometer. It is fitted with a 4 pole connector as standard.Scope of supply: Meter, battery, conductivity probe, in case
€191,10
Conductivity tester Pocket Tester SD30 EC | Type: SD30 EC, Temperature: 0 ... 50 °C, Accuracy temperature: ±0.5 °C
Conductivity tester Pocket Tester SD30 EC | Type: SD30 EC, Temperature: 0 ... 50 °C, Accuracy temperature: ±0.5 °C
Brand: Tintometer GmbHPocket Tester with waterproof housing for measuring conductivity, TDS, salinity, and temperature. Ideal for regular checks in industrial plants or swimming pools. With lanyard and clip on the device head.Three-colour LED lighting system (blue, green, red) and display symbols for easy handling3 multifunction buttons with symbolsUp to 3 calibration pointsWith stability indicator, auto-hold, and auto-off functionTransparent lid for measurement, calibration, and storage of the electrodeOptimised lid design for an upright and stable position of the testerBattery operation (4 x AAA batteries)Easy battery and electrode replacement
€136,00
Electrodes for Conductivity meter SD 325 CON | Description: Spare probe for pure water LC 10 (< 200 µS/cm)
Electrodes for Conductivity meter SD 325 CON | Description: Spare probe for pure water LC 10 (< 200 µS/cm)
Brand: Tintometer GmbHAvailable in 3 variants
€351,50
Electrodes for Conductivity meter SD 325 CON | Description: Spare probe LC 12 (< 200 mS/cm)
Electrodes for Conductivity meter SD 325 CON | Description: Spare probe LC 12 (< 200 mS/cm)
Brand: Tintometer GmbHAvailable in 3 variants
€398,70
Electrodes for Conductivity meter SD 325 CON | Description: Spare probe LC 16 (< 1000 mS/cm)
Electrodes for Conductivity meter SD 325 CON | Description: Spare probe LC 16 (< 1000 mS/cm)
Brand: Tintometer GmbHAvailable in 3 variants
€467,10
Electrodes for pH/Redox meter SD305pH | Description: Redox electrode, plastic, BNC-plug
Electrodes for pH/Redox meter SD305pH | Description: Redox electrode, plastic, BNC-plug
Brand: Tintometer GmbHpH electrode with integrated temperature sensor and robust plastic shaft. Two ceramic diaphragms for measuring water samples with low conductivity. Low maintenance thanks to gel electrolyte.
€138,30
Electrodes for pH/Redox meter SD305pH | Description: Spare pH electrode Type 226, plastic / gel, BNC plug
Electrodes for pH/Redox meter SD305pH | Description: Spare pH electrode Type 226, plastic / gel, BNC plug
Brand: Tintometer GmbHpH electrode with integrated temperature sensor and robust plastic shaft. Two ceramic diaphragms for measuring water samples with low conductivity. Low maintenance thanks to gel electrolyte.
€104,40
Electrodes for pH/Redox meter SD305pH | Description: Spare pH electrode Type 330, plastic / gel, BNC plug
Electrodes for pH/Redox meter SD305pH | Description: Spare pH electrode Type 330, plastic / gel, BNC plug
Brand: Tintometer GmbHpH electrode with integrated temperature sensor and robust plastic shaft. Two ceramic diaphragms for measuring water samples with low conductivity. Low maintenance thanks to gel electrolyte.
€90,50
Electrodes for pH/Redox meter SD305pH | Description: Spare pH electrode with integrated temperature sensor plastic / gel BNC-plug
Electrodes for pH/Redox meter SD305pH | Description: Spare pH electrode with integrated temperature sensor plastic / gel BNC-plug
Brand: Tintometer GmbHpH electrode with integrated temperature sensor and robust plastic shaft. Two ceramic diaphragms for measuring water samples with low conductivity. Low maintenance thanks to gel electrolyte.
€140,20
Electrodes for pH/Redox meter SD305pH | Description: Temperature probe Pt1000, metal
Electrodes for pH/Redox meter SD305pH | Description: Temperature probe Pt1000, metal
Brand: Tintometer GmbHpH electrode with integrated temperature sensor and robust plastic shaft. Two ceramic diaphragms for measuring water samples with low conductivity. Low maintenance thanks to gel electrolyte.
€89,70
Multi-parameter tester Pocket Tester SD40 Multi | Type: SD40 Multi, Temperature: 0 ... 50 °C, Accuracy temperature: ±0.5 °C
Multi-parameter tester Pocket Tester SD40 Multi | Type: SD40 Multi, Temperature: 0 ... 50 °C, Accuracy temperature: ±0.5 °C
Brand: Tintometer GmbHPocket Tester with waterproof housing for measuring pH, conductivity, TDS, salinity, and temperature. Ideal for regular checks in industrial plants or swimming pools. With lanyard and clip on the device head.Three-colour LED lighting system (blue, green, red) and display symbols for easy handling3 multifunction buttons with symbolsUp to 3 calibration pointsWith stability indicator, auto-hold, and auto-off functionTransparent lid for measurement, calibration, and storage of the electrodeOptimised lid design for an upright and stable position of the testerBattery operation (4 x AAA batteries)Easy battery and electrode replacement
€185,00
123456

Copyright © 2026 - Achrom nv - BE 0445.025.508    |    General terms    |    Cookiebeleid    |    Privacybeleid    |    Handcrafted by CrayonCru®

Our website uses cookies.
Both we and our third-party partners use cookies. Some are strictly necessary for the site to function, but there are also optional cookies.

Necessary and functional cookies are always on. If you click "accept all cookies", you also accept the optional cookies. You can choose which cookies you want to enable via "set preferences".

Our website uses cookies.
What are cookies? What cookies do we use and why? Read more in our cookie policy

Necessary cookies

Cookies that are indispensable for your visit to the Website and the correct use thereof

Functional cookies

Cookies that make it easier and more pleasant for you to visit the Website, for example by personalising your browsing experience.

Performance cookies

Cookies that collect information about your use of the Website in order to improve the content of the Website and adapt it to the wishes of the User.

Third-party cookies

Cookies placed by third parties who offer their own services via the Website, such as social media, advertisements or video services.