Please wait

Your message is being sent

An error occurred

Analytical measurement and testing

Chromatography

Cleaning and sterilisation

Cleanroom

Distillation, separation, filtration

Environmental-, soil-, water-, food analysis

General laboratory consumables

Heating and cooling technology

Life sciences

Liquid handling

Occupational safety, security

Optical instruments and microscopes

Sample preparation

Stirring, shaking, mixing

Vacuum technology, drying, dry storage

123456
Digital force gauge FL-M | Measuring range (max.) N: 10000, Readability: 5 N, Dimensions (WxDxH): 170 x 75 x 30 mm
Digital force gauge FL-M | Measuring range (max.) N: 10000, Readability: 5 N, Dimensions (WxDxH): 170 x 75 x 30 mm
Brand: Kern & Sohn GmbHAvailable in 4 variantsFor tensile and compressive force measurement with external measuring cell.Graphics display with backlightPeak Hold ModeMetal housingCan be mounted on all SAUTER test standsCapacity display: A bar lights up to show how much of the measuring range is still availableMeasuring with tolerance range (limit-setting function)Internal memory for up to 500 measurementsContinuous analogue outputData interface RS-232, USBRechargeable battery operationScope of supply:Force gauge, carrying case, tension loops, mains adapter
€1.250,00
Digital force gauge FL-S | Type: FL 5, Measuring range (max.) N: 5, Readability N: 0.002
Digital force gauge FL-S | Type: FL 5, Measuring range (max.) N: 5, Readability N: 0.002
Brand: Kern & Sohn GmbHAvailable in 8 variantsUniversal digital force gauges with integrated measuring cell.Turnable display with backlightCan be mounted on all SAUTER test standsMetal housingSelectable measuring units: N, kN, kg, oz, lbReal time or Peak Hold Mode to observe transcients or capture peaksCapacity display: A bar lights up to show how much of the measuring range is still availableMeasuring with tolerance range (limit-setting function):Upper and lower limiting can be programmed, in pull and push direction. The process is supported by an acoustic and visual signalInternal memory for up to 500 measurementsContinuous analogue output: Linear voltage signal in relation to the load (-2 up to +2 V)Scope of supply: Digital force gauge, hard carrying case, 3 standard attachments (FL 2K: with external measuring cell, tension loops and pressure plates, without standard attachments)
€570,00
Digital force gauge FS | Measuring range (max.) N: 100, Readability: 0,02 N, No. of channels: 2
Digital force gauge FS | Measuring range (max.) N: 100, Readability: 0,02 N, No. of channels: 2
Brand: Kern & Sohn GmbHAvailable in 10 variantsForce gauge with integrated measuring cell for tensile and compressive force measurement. If an external measuring channel is used, the internal load cell is deactivated as long as an external load cell is connected. Suitable for 4-wire and 6-wire sensors with strain gauges.3,5" touchscreenSimultaneous measurement on up to four channelsTwo-point adjustment with weights or numerical adjustment possibleExternal sensor data is stored directly in the connectorUSB interface for programming, data transfer and power supplyIntegrated SD card memoryTolerance functionTRACK function for continuous display of the measurementPeak value measurementRechargeable battery operationCan be mounted on all SAUTER test standsScope of supply:Force gauge, system case (systainer® T-LOC), plug-in power supply, USB cable type C
€1.070,00
Digital torque measurement | Type: DA 5-3, Measuring range: 5 Nm, Readability: 0,001
Digital torque measurement | Type: DA 5-3, Measuring range: 5 Nm, Readability: 0,001
Brand: Kern & Sohn GmbHAvailable in 3 variantsFor torque testing of bottles and other packaging with screw tops. Quick pin system: The four bottle mounts are pushed in, instead of being screwed in, to save time. This allows you to reconfigure quickly for other bottle sizes.Can be used in both directions of rotationMetal housingCapacity display: A bar lights up to show how much of the measuring range is still availablePeak hold mode to capture peaksFunction to set limits: Input of an upper/lower limit valueVisual and acoustic signalAUTO-OFF functionBack-lit LCD graphic displayInternal data memory saves up to 500 measurementsMemory contents can be transferred to the PC using optional softwareUSB and RS 232 data interfacesRubber feet with anti-slip featureScope of supply: Digital torque measurement, four bottle mounts with rubber coat, sturdy carry case
€1.990,00
Drying pads Grade 556Z | Width mm: 37, Length mm: 100
Drying pads Grade 556Z | Width mm: 37, Length mm: 100
Brand: Cytiva Europe GmbHFor retaining specimen visibility (50 sheets).
€4,67
Gloss meter TG 268 | Type: TG 268
Gloss meter TG 268 | Type: TG 268
Brand: The Tintometer LimitedVersatile, portable gloss meter designed for fast and accurate measurement of low, medium or high gloss levels of coatings, plastics and related materials. The device is also suitable for large-scale uniformity checks in continuity mode.Basic, statistical and continuous measurement methodsDisplay of 5 data rows including storage capacity of more than 5000 data setsTFT 3.5 inch, capacitive touchscreenIntuitive, integrated software with icon guideUSB and RS 232 interfacesSupports ASTM D523, ASTM C584, ASTM D2457, BS3900 D5, DIN 67530, DIN EN ISO 2813, EN ISO 7668 and JI Z 8741 standardsScope of supply: Gloss meter, OnGloss software (PC), calibration plate, USB cable, external DC power supply, user manual (USB stick), carrying case, battery
€2.487,73
Hardness comparison plates for Shore hardness testers, HB / HD | Description: 7 plates for Shore A, tolerance up to ±2 HA
Hardness comparison plates for Shore hardness testers, HB / HD | Description: 7 plates for Shore A, tolerance up to ±2 HA
Brand: Kern & Sohn GmbHAvailable in 2 variants
€105,00
Incident and transmitted light microscopes Panthera TEC MAT | Type: TEC MAT BF, Description: Trinocular, incident light
Incident and transmitted light microscopes Panthera TEC MAT | Type: TEC MAT BF, Description: Trinocular, incident light
Brand: MOTIC Deutschland GmbHAvailable in 2 variantsIncident and transmitted light microscopes for science materials, inspection of semiconductor components, LCD displays and wafers, equipped with an intelligent brightfield / darkfield illumination concept. The microscope models with additionally integrated LED transmitted light expand the application options in the direction of complex composite materials.Tube type Siedentopf, swivelingWidefield oculars for spectacle wearers with diopter adjustment on both ocularsCCIS® Plan Achromat & S-APO (PB free), DIN objectivesReversed coded nosepieceLED incident light illuminator with field and aperture diaphragm, with slots for polariser / analyser slidersWith interchangeable illuminationMotic LightTracer: Light memory, sleep mode (auto on-off), nosepiece LED light intensity and mode indicatorCoaxial coarse and fine focusing system with tension adjustmentIntegrated power supply with sleep modeUSB 2.0 for external camera powerAdditional equipment depending on the model with bright field (transmitted light), segmentable dark field (reflected light), polarization (reflected light)Scope of supply: Dust cover, power cord, allen key, screws for metal extension support
€4.469,00
Jolting Volumeters | Type: Jolting Volumeters
Jolting Volumeters | Type: Jolting Volumeters
Brand: J.Engelsmann AGFor determination of volumes before and after tamping and tamping density, as well as compaction. Acc. to European Pharmacopoeia, DIN ISO 787 part 11, ISO 3953, ISO 8967 and ASTM B 527-93.
€2.605,00
Leeb hardness tester, mobile | Type: HK-D
Leeb hardness tester, mobile | Type: HK-D
Brand: Kern & Sohn GmbHAvailable in 2 variantsThe Leeb hardness tester measures metallic samples and offers mobility and flexibility compared to stationary tabletop devices and testing devices with internal sensor.External impact sensorAll measurement directions possible (360°) thanks to an automatic compensation functionInternal memory for up to 600 data groupsMini statistics function: displays the measured result, the average value, the impact direction, date and timeMeasurement value display: Rockwell (Type A, B, C), Vickers (HV), Shore (HS), Leeb (HL), Brinell (HB)Automatic unit conversion: The measuring result is automatically converted into all specified hardness unitsMeasuring with tolerance range (limit-setting function):Upper and lower limiting can be programmedAcoustic and visual signalMatrix display: Backlit multi-function displayRobust metal housingScope of supply:HK-D: Mobile Leeb hardness tester, hard carrying caseHK-DB: Mobile Leeb hardness tester, hard carrying case, standard block for calibration, hardness approx. 800 HLD
€1.420,00
Leeb hardness testers, mobile, HMM, with printer | Type: HMM
Leeb hardness testers, mobile, HMM, with printer | Type: HMM
Brand: Kern & Sohn GmbHAdvanced features for demanding applications.Impact (rebound) sensor: The bounce module is accelerated by a spring against the item being tested. Depending on how hard the object is, the kinetic energy of the module will be absorbed. The speed reduction will be measured and converted to Leeb hardness values.External impact sensor (Type D) includedAutomatic recognition of the impact (rebound) sensor connected to the HMMMobility: In comparison with stationary table-top devices and testing devices with an internal sensor, using the HMM offers the highest level of mobility and flexibilityAll measurement directions possible (360°) thanks to an automatic compensation functionStandard block for calibration included (approx. 790 ± 40 HL)Internal memory for up to 9 data groups, with up to 9 values per group forming the average value of the groupMini statistics function: displays the measured result, the average value, the impact direction, date and timeMeasurement value display: Rockwell (B & C), Vickers (HV), Brinell (HB), Shore (HSD), Leeb (HL), tensile strength (MPa)Automatic unit conversion: The measuring result is automatically converted into all specified hardness unitsDelivered in a hard carrying caseWireless IR printer included for on-site printing of measurement protocols (battery operated)
€1.180,00
Leeb hardness testers, portable, HMM | Type: HMM-NP
Leeb hardness testers, portable, HMM | Type: HMM-NP
Brand: Kern & Sohn GmbHAdvanced features for demanding applications.Impact (rebound) sensor: The bounce module is accelerated by a spring against the item being tested. Depending on how hard the object is, the kinetic energy of the module will be absorbed. The speed reduction will be measured and converted to Leeb hardness valuesAutomatic recognition of the impact (rebound) sensor connected to the HMMMobility: In comparison with stationary table-top devices and testing devices with an internal sensor, using the HMM offers the highest level of mobility and flexibilityAll measurement directions possible (360°) thanks to an automatic compensation functionInternal memory for up to 9 data groups, with up to 9 values per group forming the average value of the groupMini statistics function: displays the measured result, the average value, the impact direction, date and timeMeasurement value display: Rockwell (B & C), Vickers (HV), Brinell (HB), Shore (HSD), Leeb (HL), tensile strength (MPa)Automatic unit conversion: The measuring result is automatically converted into all specified hardness unitsAUTO-OFF function, battery level indicatorScope of supply:Leeb hardness tester, external impact sensor, standard block for calibration (approx. 790 ± 40 HL), carrying case
€1.060,00
123456

Copyright © 2026 - Achrom nv - BE 0445.025.508    |    General terms    |    Cookiebeleid    |    Privacybeleid    |    Handcrafted by CrayonCru®

Our website uses cookies.
Both we and our third-party partners use cookies. Some are strictly necessary for the site to function, but there are also optional cookies.

Necessary and functional cookies are always on. If you click "accept all cookies", you also accept the optional cookies. You can choose which cookies you want to enable via "set preferences".

Our website uses cookies.
What are cookies? What cookies do we use and why? Read more in our cookie policy

Necessary cookies

Cookies that are indispensable for your visit to the Website and the correct use thereof

Functional cookies

Cookies that make it easier and more pleasant for you to visit the Website, for example by personalising your browsing experience.

Performance cookies

Cookies that collect information about your use of the Website in order to improve the content of the Website and adapt it to the wishes of the User.

Third-party cookies

Cookies placed by third parties who offer their own services via the Website, such as social media, advertisements or video services.