Please wait

Your message is being sent

An error occurred

Analytical measurement and testing

Chromatography

Cleaning and sterilisation

Cleanroom

Distillation, separation, filtration

Environmental-, soil-, water-, food analysis

General laboratory consumables

Heating and cooling technology

Life sciences

Liquid handling

Occupational safety, security

Optical instruments and microscopes

Sample preparation

Stirring, shaking, mixing

Vacuum technology, drying, dry storage

123456
Coating thickness gauge, digital, TE-FN | Measuring range µm: 100/1250, Readability: 0,1/1 µm, Dimensions (WxDxH): 131 x 65 x 28 mm
Coating thickness gauge, digital, TE-FN | Measuring range µm: 100/1250, Readability: 0,1/1 µm, Dimensions (WxDxH): 131 x 65 x 28 mm
Brand: Kern & Sohn GmbHFor non-magnetic coatings on iron and steel and coatings on non-magnetic metals. The Offset-Accur function allows you to adjust the instrument precisely on the locally measured range by a two-point calibration. This results in a higher accuracy of approx. 1 % of the measured value.Selectable measuring units: µm, mlAuto-Power-OffBattery operationData interface RS-232Scope of supply: Coating thickness gauge, external sensor, base plate, calibration foils, carrying case
€520,00
Coating thickness gauges, digital, TB-F | Measuring range µm: 100/2000, Readability: 0,1/1 µm, Dimensions (WxDxH): 161 x 69 x 32 mm
Coating thickness gauges, digital, TB-F | Measuring range µm: 100/2000, Readability: 0,1/1 µm, Dimensions (WxDxH): 161 x 69 x 32 mm
Brand: Kern & Sohn GmbHAvailable in 2 variantsFor measuring of non-magnetic coatings on iron and steel. The Offset-Accur function allows you to adjust the instrument precisely on the locally measured range by a two-point calibration. This results in a higher accuracy of approx. 1 % of the measured value.Selectable measuring units: µm, inch (mil)Auto-Power-OffBattery operationScope of supply:Coating thickness gauge, external sensor, base plate, calibration foils, carrying case
€325,00
Coating thickness gauges, digital, TB-FN | Measuring range µm: 100/1000, Readability: 0,1/1 µm, Dimensions (WxDxH): 161 x 69 x 32 mm
Coating thickness gauges, digital, TB-FN | Measuring range µm: 100/1000, Readability: 0,1/1 µm, Dimensions (WxDxH): 161 x 69 x 32 mm
Brand: Kern & Sohn GmbHFor measuring of non-magnetic coatings on iron and steel and coatings on non-magnetic metals. The Offset-Accur function allows you to adjust the instrument precisely on the locally measured range by a two-point calibration. This results in a higher accuracy of approx. 1 % of the measured value.Selectable measuring units: µm, inch (mil)Auto-Power-OffBattery operationScope of supply:Coating thickness gauge, external sensor, base plate, calibration foils, carrying case
€455,00
Coating thickness gauges, digital, TF | Measuring range µm: 100/1250, Readability: 0,1/1 µm, Dimensions (WxDxH): 126 x 65 x 35 mm
Coating thickness gauges, digital, TF | Measuring range µm: 100/1250, Readability: 0,1/1 µm, Dimensions (WxDxH): 126 x 65 x 35 mm
Brand: Kern & Sohn GmbHFor non-magnetic coatings on iron and steel and coatings on non-magnetic metals. The Offset-Accur function allows you to adjust the instrument precisely on the locally measured range by a two-point calibration. This results in a higher accuracy of approx. 1 % of the measured value.LCD display, backlitScan mode allows continuous measurement or single point measuring modeMini Statistics Kit: displays the measured result, the average value and the max and the min valueInternal memory up to 99 valuesSelectable measuring units: µm, inch (mil)Data interface RS-232Scope of supply:Coating thickness gauge, base plate, calibration foils, carrying case
€600,00
Coating thickness gauges, digital, TG | Measuring range µm: 100/1250, Readability: 0,1/1 µm, Dimensions (WxDxH): 126 x 65 x 35 mm
Coating thickness gauges, digital, TG | Measuring range µm: 100/1250, Readability: 0,1/1 µm, Dimensions (WxDxH): 126 x 65 x 35 mm
Brand: Kern & Sohn GmbHFor non-magnetic coatings on iron and steel and coatings on non-magnetic metals. The Offset-Accur function allows you to adjust the instrument precisely on the locally measured range by a two-point calibration. This results in a higher accuracy of approx. 1 % of the measured value.LCD display, backlitScan mode allows continuous measurement or single point measuring modeMini Statistics Kit: displays the measured result, the average value and the max and the min valueInternal memory up to 99 valuesSelectable measuring units: µm, inch (mil)Data interface RS-232Scope of supply:Coating thickness gauge, external sensor, base plate, calibration foils, carrying case
€600,00
Data transfer software AFH FAST for Digital force gauge FL | Type: Data transfer software AFH FAST
Data transfer software AFH FAST for Digital force gauge FL | Type: Data transfer software AFH FAST
Brand: Kern & Sohn GmbHHigh speed data transfer software for force-time-measurements.Force measurements can be conducted over a very short period, i.e. seconds. A high speed data transfer to a PC is possible (with a transfer of up to 20 data sets per second) when combining the AFH FAST with FL. AFH FAST shows the results in a Force-Time-Graph and can export the data to MS Excel. Compatible with Microsoft Windows 7/8.1/10 operating systems. Incl. interface cable
€115,00
Digital force gauge FC | Measuring range (max.) N: 500, Readability: 0,1 N, Dimensions (WxDxH): 145 x 73 x 34 mm
Digital force gauge FC | Measuring range (max.) N: 500, Readability: 0,1 N, Dimensions (WxDxH): 145 x 73 x 34 mm
Brand: Kern & Sohn GmbHAvailable in 5 variantsThe compact force gauge for tensile and compressive force measurements can be mounted on all SAUTER test stands.Turnable display with backlightPeak Hold functionMetal housingCapacity display: A bar lights up to show how much of the measuring range is still availableMeasuring with tolerance range (limit-setting function)Acoustic and optical signal when the measuring range is exceededInternal memory for up to 1000 measurementsData interface: USB, RS-232Rechargeable battery pack integratedScope of supply:Force gauge, hard carrying case, standard attachments, extension rod 90 mm
€415,00
Digital force gauge FH-EXT | Measuring range (max.) N: 500, Readability: 0,1 N, Dimensions (WxDxH): 230 x 66 x 36 mm
Digital force gauge FH-EXT | Measuring range (max.) N: 500, Readability: 0,1 N, Dimensions (WxDxH): 230 x 66 x 36 mm
Brand: Kern & Sohn GmbHAvailable in 4 variantsForce-measurement device with external, high-resolution measuring cell for very slight forces or loads in machines and plants.High-resolution displayPeak Hold ModeFunction to set limits: Input of an upper/lower limit valueVisual and acoustic signalData interface RS-232Rechargeable battery packSuitable for almost all SAUTER test standsScope of supply:Force gauge, mains adapter
€1.000,00
Digital force gauge FH-M | Measuring range (max.) N: 1000, Readability: 0,5 N, Dimensions (WxDxH): 230 x 66 x 36 mm
Digital force gauge FH-M | Measuring range (max.) N: 1000, Readability: 0,5 N, Dimensions (WxDxH): 230 x 66 x 36 mm
Brand: Kern & Sohn GmbHAvailable in 14 variantsUniversal digital force-measuring devices for tensile and compressive force measurement with external measuring cell.Turnable display with backlightPeak Hold functionMeasuring with tolerance range (limit-setting function)Acoustic and optical signalAuto-Power-OffInternal memoryData interface RS-232Rechargeable battery pack integratedScope of supply:Force gauge, hard carrying case, tension loops, pressure plates, 3 m cable
€1.000,00
Digital force gauge FH-S
Digital force gauge FH-S
Brand: Kern & Sohn GmbHAvailable in 16 variantsUniversal digital force gauges for tension and compression tests with integrated measuring cell.Turnable display with backlightDigital force gauge with internal sensorData interface RS-232Selectable measuring units: N, lb, kgPeak-Hold function to capture peaks (measurement result will be "frozen" for a short time) or Track function mode for a continuous measurement indication (period of time approx. 10 s)Function to set limits, programming of Max./ Min., in pull and push direction, with output of acoustic and optical signal. Ideal mode for efficient and accurate testing of standard partsAuto-Power-OffInternal memory for up to 10 measurementsMini Statistics Kit: calculates the average result from up to ten stored single results, min., max., nCan be mounted on all SAUTER test standsScope of supply:Force gauge, carrying case
€640,00
Digital force gauge FH-S with screw-in tension clamp | Measuring range (max.) N: 500, Readability: 0,1 N, Dimensions (WxDxH): 230 x 66 x 36 mm
Digital force gauge FH-S with screw-in tension clamp | Measuring range (max.) N: 500, Readability: 0,1 N, Dimensions (WxDxH): 230 x 66 x 36 mm
Brand: Kern & Sohn GmbHUniversal digital force gauges for tension and compression tests with integrated measuring cell.Turnable display with backlightDigital force gauge with internal sensorData interface RS-232Selectable measuring units: N, lb, kgPeak-Hold function to capture peaks (measurement result will be "frozen" for a short time) or Track function mode for a continuous measurement indication (period of time approx. 10 s)Function to set limits, programming of Max./ Min., in pull and push direction, with output of acoustic and optical signal. Ideal mode for efficient and accurate testing of standard partsAuto-Power-OffInternal memory for up to 10 measurementsMini Statistics Kit: calculates the average result from up to ten stored single results, min., max., nCan be mounted on all SAUTER test standsScope of supply:Force gauge, carrying case, screw-in tension clamp AE 500
€710,00
Digital force gauge FK | Type: FK 50., Measuring range (max.) N: 50, Readability N: 0.02
Digital force gauge FK | Type: FK 50., Measuring range (max.) N: 50, Readability N: 0.02
Brand: Kern & Sohn GmbHAvailable in 6 variantsRobust Push/Pull force gauge for simple measurement.Turnable display: automatic direction identificationSecure operability due to ergonomic designPeak-hold function to capture peaks (value is "frozen" for approx. 10 seconds) or Track function mode for a continuous measurement indicationSelectable measuring units: N, lb, kg, ozAuto-Power-OffCan be mounted on all SAUTER test stands
€275,00
123456

Copyright © 2026 - Achrom nv - BE 0445.025.508    |    General terms    |    Cookiebeleid    |    Privacybeleid    |    Handcrafted by CrayonCru®

Our website uses cookies.
Both we and our third-party partners use cookies. Some are strictly necessary for the site to function, but there are also optional cookies.

Necessary and functional cookies are always on. If you click "accept all cookies", you also accept the optional cookies. You can choose which cookies you want to enable via "set preferences".

Our website uses cookies.
What are cookies? What cookies do we use and why? Read more in our cookie policy

Necessary cookies

Cookies that are indispensable for your visit to the Website and the correct use thereof

Functional cookies

Cookies that make it easier and more pleasant for you to visit the Website, for example by personalising your browsing experience.

Performance cookies

Cookies that collect information about your use of the Website in order to improve the content of the Website and adapt it to the wishes of the User.

Third-party cookies

Cookies placed by third parties who offer their own services via the Website, such as social media, advertisements or video services.