Please wait

Your message is being sent

An error occurred

Solvent pump foot operated | Description: Foot pump with flexible tubing, Immersion depth mm: 950, Flow rate l / min.: 30
Solvent pump foot operated | Description: Foot pump with flexible tubing, Immersion depth mm: 950, Flow rate l / min.: 30
Brand: Bürkle GmbHAvailable in 2 variantsFor filling off high purity liquids such as solvents. Due to the barrel screw joint and the stopcock, the container and the pump can be hermetically sealed. Electrostatic charge can be dissipated through the accessory antistatic set (please order seperately).Medium-contacting parts made opf stainless steel (1.4301) and PTFEFor barrels up to 220 litres, immersion tube can be steplessly adjusted to the barrel depthSuitable for steel barrels with R 2'' thread
€746,35
Solvent pump hand operated | Description: Hand pump ball for solvent pump
Solvent pump hand operated | Description: Hand pump ball for solvent pump
Brand: Bürkle GmbHAvailable in 3 variantsFor contamination-free removal of organic solvents and flavouring agents. Can be completely closed off with two ball valves so that no dangerous vapours can escape after dispensing. Electrostatic charge can be dissipated through the accessory antistatic set (please order separately).Medium-contacting parts are made of stainless steel (1.4301) and PTFEFor containers up to 60 litresSuitable for containers with R 2'' threadThe solvent pump for tinfoil canisters has a connector thread for pull-out spouts
€93,55
SOMA Chip Kits | Description: SOMA Chip Kits
SOMA Chip Kits | Description: SOMA Chip Kits
Brand: NanoEn Tek Inc.For ADAM™ SCC 2. The kits consist of 100 slides (4 channel) and 2 x 25 ml SCC-Solution for counting somatic cells.
€316,00
Somatic cell counter ADAM™ SCC 2 | Type: ADAM™ SCC 2, Dimensions (W x D x H) mm: 276 x 227 x 270, Weight kg: 7,0
Somatic cell counter ADAM™ SCC 2 | Type: ADAM™ SCC 2, Dimensions (W x D x H) mm: 276 x 227 x 270, Weight kg: 7,0
Brand: NanoEn Tek Inc.ADAM™ SCC 2 is a somatic cell counter integrated with fluorescence optic and image analysis software for milk quality control.Built-in tabletLess than 13 seconds for a test (4 channel)PI staining methodNo need for calibrationWiFi (USB Dongle)
€12.665,00
Sonotrode for compact ultrasonic processor UP200S/UP200H | Type: S14, Tip: dia. 14 mm, For volume ml: 50 ... 1000 ml
Sonotrode for compact ultrasonic processor UP200S/UP200H | Type: S14, Tip: dia. 14 mm, For volume ml: 50 ... 1000 ml
Brand: Hielscher Ultrasonics GmbHAvailable in 6 variantsTitanium, approx. length 100 mm.
€314,00
Sonotrodes for ultrasonic homogenisers SONOPULS HD 5050 / SONOPULS HD 4000 series | Type: TS 225, For volume ml: 30 ... 1000, Ø: 25.0 mm
Sonotrodes for ultrasonic homogenisers SONOPULS HD 5050 / SONOPULS HD 4000 series | Type: TS 225, For volume ml: 30 ... 1000, Ø: 25.0 mm
Brand: Bandelin electronicAvailable in 16 variantsTitanium sonotrodes.For connection to stepped horns/booster horns.
€266,00
Sonotrodes for ultrasonic homogenisers SONOPULS mini20 / SONOPULS HD 5020 | Type: MS 2.0, For volume ml: 0.25 ... 20, Ø: 2.0 mm
Sonotrodes for ultrasonic homogenisers SONOPULS mini20 / SONOPULS HD 5020 | Type: MS 2.0, For volume ml: 0.25 ... 20, Ø: 2.0 mm
Brand: Bandelin electronicAvailable in 3 variantsTitanium sonotrodes.For connection to stepped horns/booster horns.
€165,00
Sonotrodes for ultrasonic homogenisers UP200Ht / UP200St | Type: S26d26G, Ø mm: 26, Length mm: 200
Sonotrodes for ultrasonic homogenisers UP200Ht / UP200St | Type: S26d26G, Ø mm: 26, Length mm: 200
Brand: Hielscher Ultrasonics GmbHSonotrodes made of glass and titanium. With M6x0.75 male thread.
€1.390,00
Sonotrodes for ultrasonic homogenisers UP200Ht / UP200St, titanium | Type: S26d40, Ø mm: 40, Length mm: 80
Sonotrodes for ultrasonic homogenisers UP200Ht / UP200St, titanium | Type: S26d40, Ø mm: 40, Length mm: 80
Brand: Hielscher Ultrasonics GmbHAvailable in 6 variantsSonotrodes made of titanium. With M6x0.75 male thread. Autoclavable.Sonotrodes S26d2D and S26d7D with seal for closed systems for use with flow cell reactor.
€675,00
Sontara® EC sheets | Width mm: 305, Length mm: 305, Thickness mm: 0.53
Sontara® EC sheets | Width mm: 305, Length mm: 305, Thickness mm: 0.53
Brand: SontaraAvailable in 2 variantsEngineered specifically for wiping, Sontara EC® is a tough, durable material that is abrasion and solvent resistent, contains no binders or glues, is low-linting, and highly absorbent in water, oil and solventsTough and durable for multiple reuseAbsorbent and wipes drySolvent-resistantLow-linting
€121,80
Sound insulation box for ultrasonic homogenisers | Type: SPB-L, Dimensions (L x W x H) mm: 290 x 200 x 350, Weight kg: 13
Sound insulation box for ultrasonic homogenisers | Type: SPB-L, Dimensions (L x W x H) mm: 290 x 200 x 350, Weight kg: 13
Brand: Hielscher Ultrasonics GmbHSound insulation box made of acrylic glass with divisible rod (Ø 16 mm), height-adjustable table and anti-slip mat. Sound insulation 22 dB (A) open air measurement.
€1.430,00
Sound level meter class I and II | Type: SW 1000, class I
Sound level meter class I and II | Type: SW 1000, class I
Brand: Kern & Sohn GmbHAvailable in 2 variantsFor measurements for workplaces which are outdoors, e.g. at airports, on building sites, in road construction etc. with broad access to spectrum thanks to the highly-accurate 24-Bit A/D converter.Different sound pressure levels can be selected, such as, for example, Laeq, LcPeak, LaF, LaFMax, LaFMin, SD, SEL, EThe optimised analogue frontend switch reduces the ambient noise and increases the linear measuring rangeThree profiles and 14 user-defined measurements can be calculated in parallel with different frequency and time weightingLN statistics and display of the graph showing the progression of timeUser-defined integral interval measurement up to a maximum of 24 hours is possibleFrequency weighting (filter) A, B, C, ZTime interval during measurement: F (fast), S (slow), I (pulse)Freely-definable limits for the output of an optical alarm signalPeak Hold Mode to capture peaksOctavo function for targeted sound analysisTrack function with graphic display of a measurementCalibration mode (with optional calibrator)Trigger mode: Analogue signal to switch the device on or off with 3.5 mm plugAutomatic measurement for timer function is possibleMeasured value recording frequency selectable: 10, 5, 2 HzData transfer using MicroSD (4 GB), RS-232 or USBOption of fitting a column on the rear of the housing, ¼ threadScope of supply: Sound level meter, memory card, hard carrying case
€2.150,00

Our website uses cookies.
Both we and our third-party partners use cookies. Some are strictly necessary for the site to function, but there are also optional cookies.

Necessary and functional cookies are always on. If you click "accept all cookies", you also accept the optional cookies. You can choose which cookies you want to enable via "set preferences".

Our website uses cookies.
What are cookies? What cookies do we use and why? Read more in our cookie policy

Necessary cookies

Cookies that are indispensable for your visit to the Website and the correct use thereof

Functional cookies

Cookies that make it easier and more pleasant for you to visit the Website, for example by personalising your browsing experience.

Performance cookies

Cookies that collect information about your use of the Website in order to improve the content of the Website and adapt it to the wishes of the User.

Third-party cookies

Cookies placed by third parties who offer their own services via the Website, such as social media, advertisements or video services.