Please wait

Your message is being sent

An error occurred

Semi-micro- and analytical balances Cubis® II, with automatic glass draft shield | Type: 324S. MCA, Max. load: 320 g, Readability: 0,1 mg
Semi-micro- and analytical balances Cubis® II, with automatic glass draft shield | Type: 324S. MCA, Max. load: 320 g, Readability: 0,1 mg
Brand: Sartorius Lab InstrumentsAvailable in 4 variantsAutomatic motorised levelingAutomatic glass draft shield with integrated ionizerHeight and weight depending upon weighing pan size, filter weighing pan and draft shield. Verified balances and other configurations are available online or on request.
€17.270,00
Semi-quantitative test strips | Type: Ozone Test
Semi-quantitative test strips | Type: Ozone Test
Brand: Macherey-Nagel GmbH & Co. KGAvailable in 3 variantsSwimming Pool Test 3 in 1This test allows the quick and easy determination of the water quality in swimming pools. It provdies valuable results about the total alkalinity, free chlorine and pH.Free chlorine: 0.5 - 1 - 3 - 5 - 10 mg/L Cl2Alkalinity: 80 - 120 - 180 - 240 mg/L CaCO3pH: 6.4 - 6.8 - 7.2 - 7.6 - 8.4Swimming Pool Test 5 in 1Test strip for semi-quantitative determination of free and total-chlorine, alkalinity, pH and total-hardness in pool water.Chlorine, free: 0.5 - 1 - 3 - 5 - 10 mg/L Cl2Alkalinity: 80 - 120 - 180 - 240 mg/L CaCO3pH: 6.4 - 6.8 - 7.2 - 7.6 - 8.4total Chlorine: 0 - 1 - 3 - 5 - 10 mg/L Cl2total Hardness: 0 - 100 - 250 - 500 - 1000 mg/L CaCO3Ozone TestThis test is used for the quick and easy determination of ozone in air.Range:
€21,30
Semi-rigid light guides, GLS1 / GLS2 / GLS3 | Type: GLS1, Description: 1-armed, arm length 800 mm, active Ø 4.5 mm, Material: Steel / brass
Semi-rigid light guides, GLS1 / GLS2 / GLS3 | Type: GLS1, Description: 1-armed, arm length 800 mm, active Ø 4.5 mm, Material: Steel / brass
Brand: Starlight Opto-ElectronicsAvailable in 11 variantsThe semi-rigid light guides are available in versions of 1-arm, 2-arms and 3-arms.High flexibility and luminous efficiencyVery good transmissionSpot illuminationLow heat generationFor halogen and LED cold light sourcesAdaptable to cold light sources from all manufacturers
€179,00
Sensors behrotest® for canisters with screw-on closures | Type : FS005, Material : PVC, Length mm : 650
Sensors behrotest® for canisters with screw-on closures | Type : FS005, Material : PVC, Length mm : 650
Brand: Behr Labor-Technik GmbHAvailable in 10 variantsSensors for monitoring the maximum fill heightSensors for monitoring the maximum fill height are used to protect against damage from overflowing vessels.A float assembly encloses a reed contact which activates an acoustic alarm when the maximum fill height is reached, enabling the user to stop further filling in time to prevent overflow.Sensors for monitoring the minimum fill heightSensors for monitoring the minimum fill height are used to protect against interruption in supply or inadequate volume available in processes requiring continuous withdrawal of a liquid from a container.They give an acoustic warning when the content of the container runs low. The sensors are available in various lengths to permit use in containers of different heights. When the liquid level in the container sinks below the set point, a float drops, opening a reed contact. An alarm warning then informs the user of the imminent risk of an empty reservoir.
€211,90
Separating funnel 1 L, Duran conical form, with PTFE cock, graduated
Separating funnel 1 L, Duran conical form, with PTFE cock, graduated
Brand: DWK Life Sciences GmbH (Duran)Available in 4 variantsWith PTFE key. DIN ISO 4800.
€158,58
Separating funnel holder, PP | Description: Separating funnel holder
Separating funnel holder, PP | Description: Separating funnel holder
Brand: ISOLAB Laborgeräte GmbHSuitable to hold all types of laboratory funnels and also separatory funnels with diameter from 60 up to 150 mm. Two tapered wedges are provided to ensure firm grip.
€13,70
Separating funnel holder, PP | Type: Separating funnel holder
Separating funnel holder, PP | Type: Separating funnel holder
Brand: Kartell S.p.A.For holding conical separating funnels up to 1000ml. Simple assembly by screw-compression grip. Fits support rods with an outside dia. of 8 to 14mm. Cannot be used with funnels below 75 mm diameter.
€13,96
Separating Funnels acc. to Gilson, borosilicate glass 3.3 | Type: PTFE key, Capacity ml: 2000, Bore mm: 6.0
Separating Funnels acc. to Gilson, borosilicate glass 3.3 | Type: PTFE key, Capacity ml: 2000, Bore mm: 6.0
Brand: Lenz-Laborglas GmbH & Co. KGAvailable in 12 variantsWith NS-socket and interchangeable PE stopper, stopcock and key with retaining device. Ungraduated.Two types available:With solid glass keyWith PTFE key
€220,90
Separating funnels acc. to Squibb, borosilicate glass 3.3 | Nominal capacity: 50 ml
Separating funnels acc. to Squibb, borosilicate glass 3.3 | Nominal capacity: 50 ml
Brand: Lenz-Laborglas GmbH & Co. KGAvailable in 12 variantsWith PTFE plug. Available with or without scale to read the approximate volume. With PP-stopper .
€61,81
Separating funnels acc. to Squibb, with glass plug, borosilicate glass 3.3 | Capacity ml: 500, Bore mm: 4.0, Socket NS: 29/32
Separating funnels acc. to Squibb, with glass plug, borosilicate glass 3.3 | Capacity ml: 500, Bore mm: 4.0, Socket NS: 29/32
Brand: Lenz-Laborglas GmbH & Co. KGAvailable in 12 variantsWith NS socket and PE stopper, with solid glass plug, with screwthread retaining device, available with or without scale (approx. volume / ml), material: borosilicate glass 3.3
€65,27
Separating funnels cylindrical, with glass plug, borosilicate glass 3.3 | Capacity ml: 50, Bore mm: 2.5, Socket NS: 29/32
Separating funnels cylindrical, with glass plug, borosilicate glass 3.3 | Capacity ml: 50, Bore mm: 2.5, Socket NS: 29/32
Brand: Lenz-Laborglas GmbH & Co. KGAvailable in 5 variantsCylindrical shape with straight discharge tube, with NS socket and PE stopper, with solid glass plug, with screwthread retaining device, with scale (approx. volume / ml).
€54,27
Separating funnels Nalgene™ with screw cap, FEP | Capacity ml: 125, Screw cap diam. mm: 28
Separating funnels Nalgene™ with screw cap, FEP | Capacity ml: 125, Screw cap diam. mm: 28
Brand: Thermo Elect.LED GmbH (Nalge)Available in 5 variantsTransparent. Teflon® FEP, Tefzel® ETFE stopcock and ETFE screw cap. Impact resistant. Non-wetting surfaces ensure no liqiud residue adhesion. Chemically stable. Length of stem under stopcock 65mm. Autoclavable.
€140,25

Our website uses cookies.
Both we and our third-party partners use cookies. Some are strictly necessary for the site to function, but there are also optional cookies.

Necessary and functional cookies are always on. If you click "accept all cookies", you also accept the optional cookies. You can choose which cookies you want to enable via "set preferences".

Our website uses cookies.
What are cookies? What cookies do we use and why? Read more in our cookie policy

Necessary cookies

Cookies that are indispensable for your visit to the Website and the correct use thereof

Functional cookies

Cookies that make it easier and more pleasant for you to visit the Website, for example by personalising your browsing experience.

Performance cookies

Cookies that collect information about your use of the Website in order to improve the content of the Website and adapt it to the wishes of the User.

Third-party cookies

Cookies placed by third parties who offer their own services via the Website, such as social media, advertisements or video services.