Please wait

Your message is being sent

An error occurred

Analytical measurement and testing

Chromatography

Cleaning and sterilisation

Cleanroom

Distillation, separation, filtration

Environmental-, soil-, water-, food analysis

General laboratory consumables

Heating and cooling technology

Life sciences

Liquid handling

Occupational safety, security

Optical instruments and microscopes

Sample preparation

Stirring, shaking, mixing

Vacuum technology, drying, dry storage

5678910
Changeable blocks for CH3-150 Combitherm-2 | For tubes: 29 mm, No. of wells: 5, Depth mm: 40
Changeable blocks for CH3-150 Combitherm-2 | For tubes: 29 mm, No. of wells: 5, Depth mm: 40
Brand: Grant Instruments Ltd.Available in 7 variants
€195,00
Changeable blocks for Thermo Scientific™ Dry Baths / Block Heaters
Changeable blocks for Thermo Scientific™ Dry Baths / Block Heaters
Brand: Thermo Elect.LED GmbH (Kendro)Available in 10 variants
€93,50
Charging rack for ashing furnaces | Description: Charging rack with handle for LV / LVT 15/11
Charging rack for ashing furnaces | Description: Charging rack with handle for LV / LVT 15/11
Brand: Nabertherm GmbHAvailable in 2 variantsCharging rack to load the furnace in different levels, including holders to insert and remove the trays.
€710,00
Cimarec™+ Hotplate | Type: HP88854105, Load max. kg: 6.8, Dimensions (W x D x H) mm: 130 x 259 x 98
Cimarec™+ Hotplate | Type: HP88854105, Load max. kg: 6.8, Dimensions (W x D x H) mm: 130 x 259 x 98
Brand: Thermo Elect.LED GmbH (Kendro)Available in 3 variants
€275,00
Clamp for flasks | For: 500 ml flask, For model: WTB15, WTB24, WTB35, WTB50
Clamp for flasks | For: 500 ml flask, For model: WTB15, WTB24, WTB35, WTB50
Brand: Memmert GmbH + Co. KGAvailable in 4 variants
€32,00
Clamps for Erlenmeyer flasks for Shaking water baths Hydro | For flasks ml: 500
Clamps for Erlenmeyer flasks for Shaking water baths Hydro | For flasks ml: 500
Brand: Lauda Dr.R.Wobser GmbH & Co.KGAvailable in 8 variantsClamps to be placed on the shaking tray.
€29,60
Clamps for shaking incubators MaxQ/Solaris™ and orbital shakers Solaris™
Clamps for shaking incubators MaxQ/Solaris™ and orbital shakers Solaris™
Brand: Thermo Elect.LED GmbH (Kendro)Available in 14 variants
€45,80
Climate Chambers ICH C, with humidity and CO2 control | Type: ICH110C, Nominal capacity: 108 l, Temperature: 0 ... 60 °C
Climate Chambers ICH C, with humidity and CO2 control | Type: ICH110C, Nominal capacity: 108 l, Temperature: 0 ... 60 °C
Brand: Memmert GmbH + Co. KGAvailable in 3 variantsThe climate chamber generation with the unique ControlCOCKPIT for a quick and intuitive operation. Unparalleled temperature and humidity homogeneity for long-term stable ambient conditions.PID microprocessor control with integrated auto-diagnostic systemInterior stainless steel 1.4301 (ASTM 304), deep-drawnStructured stainless steel housing, rear of zinc-plated steelHigh-Operation and adjustment of all parameters directly at the ControlCOCKPIT temperature connectors on the rear of the appliance for single-phase power connection according to country specific systems and IEC standardsInternal data logger with a storage capacity of at least 10 yearsGerman, English, French, Spanish language settings available on the ControlCOCKPITDigital backwards counter with target time setting adjustable between 1 minute and 99 daysThe SetpointWAIT function guarantees that the process time does not start until the set temperature is reached at all measuring points - optional for temperature values recorded by the freely positionable Pt100 sensors inside the chamberAdjustment of three calibration values for temperature and additional appliance specific parameters directly at the ControlCOCKPIT, for example relative humidityMoisture tight standard entry port, at the back, 40 mm inner diameter, can be closed by silicone stopperTwinDISPLAY: ControlCOCKPIT with two TFT colour displaysAvailable parameters on the ControlCOCKPIT: Temperature (Celsius or Fahrenheit), programme time, relative humidity, time zones, summertime/wintertimeTwo Pt100 sensors DIN class A in a 4-wire circuit for mutual monitoring, taking over functions in case of an errorAtmoCONTROL software on a USB stick for programming, managing and transferring programmes via Ethernet interface or USB portControlCOCKPIT with USB port for uploading programmes, reading out protocol logs, activating the User-ID functionDisplaying of already logged protocol data on the ControlCOCKPIT (max 10,000 values correspond to approx. 1 week)Ethernet interface on the rear of the appliance for reading out the protocol log and for uploading programmes and for online loggingMultiple overtemperature protection: Electronic temperature monitoring TWW/TWB (protection class 3.3 or 2 and mechanical temperature limiter TB (protection class 1) acc. to DIN 12880, AutoSAFETY automatically adjusts to the set value within a freely adjustable tolerance range. Setting individual MIN/MAX values for over/undertemperature alarm
€14.933,00
Climate Chambers ICH L, with humidity control and light | Type: ICH110L, Nominal capacity: 108 l, Temperature: 0 ... 60 °C
Climate Chambers ICH L, with humidity control and light | Type: ICH110L, Nominal capacity: 108 l, Temperature: 0 ... 60 °C
Brand: Memmert GmbH + Co. KGAvailable in 3 variantsSpecially designed for testing pharmaceutical products according to ICH, Q1A and Q1B, option 2, and similar global standards for stability tests of cosmetics and food.
€13.424,00
Climate Chambers ICH | Type: ICH260C, Capacity l: 256, Internal dimensions (W x D x H) mm: 640 x 500* x 800
Climate Chambers ICH | Type: ICH260C, Capacity l: 256, Internal dimensions (W x D x H) mm: 640 x 500* x 800
Brand: Memmert GmbH + Co. KGAvailable in 6 variantsThe climate chamber generation with the unique ControlCOCKPIT for a quick and intuitive operation. Unparalleled temperature and humidity homogeneity for long-term stable ambient conditions. Specially designed for testing pharmaceutical products according to ICH, Q1A and Q1B, option 2, and similar global standards for stability tests of cosmetics and food.Standard equipment :PID microprocessor control with integrated auto-diagnostic systemInterior stainless steel 1.4301 (ASTM 304), deep-drawnStructured stainless steel housing, rear of zinc-plated steelHigh-Operation and adjustment of all parameters directly at the ControlCOCKPIT temperature connectors on the rear of the appliance for single-phase power connection according to country specific systems and IEC standardsInternal data logger with a storage capacity of at least 10 yearsGerman, English, French, Spanish language settings available on the ControlCOCKPITDigital backwards counter with target time setting adjustable between 1 minute and 99 daysThe SetpointWAIT function guarantees that the process time does not start until the set temperature is reached at all measuring points - optional for temperature values recorded by the freely positionable Pt100 sensors inside the chamberAdjustment of three calibration values for temperature and additional appliance specific parameters directly at the ControlCOCKPIT, for example relative humidityMoisture tight standard entry port, at the back, 40 mm inner diameter, can be closed by silicone stopperTwinDISPLAY: ControlCOCKPIT with two TFT colour displaysAvailable parameters on the ControlCOCKPIT: Temperature (Celsius or Fahrenheit), programme time, relative humidity, time zones, summertime/wintertimeTwo Pt100 sensors DIN class A in a 4-wire circuit for mutual monitoring, taking over functions in case of an errorAtmoCONTROL software on a USB stick for programming, managing and transferring programmes via Ethernet interface or USB portControlCOCKPIT with USB port for uploading programmes, reading out protocol logs, activating the User-ID functionDisplaying of already logged protocol data on the ControlCOCKPIT (max 10,000 values correspond to approx. 1 week)Ethernet interface on the rear of the appliance for reading out the protocol log and for uploading programmes and for online loggingMultiple overtemperature protection: Electronic temperature monitoring TWW/TWB (protection class 3.3 or 2 and mechanical temperature limiter TB (protection class 1) acc. to DIN 12880, AutoSAFETY automatically adjusts to the set value within a freely adjustable tolerance range. Setting individual MIN / MAX values for over/undertemperature alarmClimate chamber variants:ICH climate chamberICH L climate chamber with lightICH C climate chamber with CO2 control
€18.828,00
Climatic Test Chamber CTC256/Temperature Test chamber TTC256 | Type: TTC256, Capacity l: 256, Shelf support ribs/shelves: 6/1
Climatic Test Chamber CTC256/Temperature Test chamber TTC256 | Type: TTC256, Capacity l: 256, Shelf support ribs/shelves: 6/1
Brand: Memmert GmbH + Co. KGAvailable in 2 variantsSimulate the perfect atmosphere for climate and temperature tests, specifically in accordance with DIN EN 60068-2-1, 2-2 and 2-3. Provide unlimited flexibility for controlled material and function tests as well as ageing tests.Standard equipmentVentilation and Control: high-performance air fan in working chamberdepending on operation status automatically variable fan speed with manual adjustment from 10% to 100%adaptive, fuzzy-supported multifunctional digital microprocessor PID-controllerautodiagnostic system with fault indication on temperature and humidity control2 x Class A, 4-wire circuit, Pt100 sensors, mutually monitoring and maintaining performance at the same temperature valuedigital 7-day-programme-timer with real time clock, precise minute settingintegral timer for heating profiles of up to 40 ramps, each segment adjustable from 1 min. up to 999 hoursdigital display (LED) of all set parameters, such as temperature, weekdays, time, humidity and set-up values - language to be chosen in setupdigital display of set values (resolution: 0.1°C below 99.9°C, 0.5°C above 100°C) and actual values (resolution: 0.1°C) of temperature (LED)long-term documenting (ring store) of all relevant data, GLP-conforming as data logger - 1024 kBprogramme stored on power failureparallel printer interface (incl. real-time clock with date function) for all PCL3-compatible ink-jet printers for GLP-conforming documentationUSB interface including Memmert "Celsius" software for programming and documentationchip card control incl. one MEMoryCard XL with 32 kB (up to 40 ramps)incl. works calibration certificate for -20°C and +160°CHeating concept: high-performance ring heaters with optimised air circulationdoor heating to avoid condensateCooling Concept twin compressor speed adjustable condenser fan refrigerant R404A Multiple Overtemperature Protection with audible and visual alarm in case of over-/undertemperature and over-/under-humidity, open door and empty water tank independently working, digitally adjustable electronic overtemperature controller, TWW protection class 3.3additional adjustable Auto-Safety-Function "ASF" for over- and undertemperature automatically following the set value at a preset tolerance range mechanical temperature limiter TB class 1 switching the heating off at approx.10°C above max. oven temperatureTemperature range:CTC/TTC: without humidity control: from -42°C up to +190°CCTC: with humidity control: from +10°C up to +95°CPower supply 400 V, 3ph, N, 50 HzStandards for CTC additionally:Electronically controlled active humidification and dehumidification from 10% to 98% rh with digital display of the relative humidity, display resolution 0.5%, setting accuracy 1%incl. works calibration certificate for +30°C at 60% rhHumidity supply with distilled water from 2 x 10 l tanks on integrated telescopic slide, with automatic water tank change-over2 x 10L tanks acting as condensate collectors, on telescopic slide mounts
€22.889,00
Clip plate for volumetric flasks
Clip plate for volumetric flasks
Brand: Scientific Industries, Inc.Clip plate made of metal for holding volumetric flasks. The clip plate can be attached to the magnetic platform.
€65,00
5678910

Copyright © 2026 - Achrom nv - BE 0445.025.508    |    General terms    |    Cookiebeleid    |    Privacybeleid    |    Handcrafted by CrayonCru®

Our website uses cookies.
Both we and our third-party partners use cookies. Some are strictly necessary for the site to function, but there are also optional cookies.

Necessary and functional cookies are always on. If you click "accept all cookies", you also accept the optional cookies. You can choose which cookies you want to enable via "set preferences".

Our website uses cookies.
What are cookies? What cookies do we use and why? Read more in our cookie policy

Necessary cookies

Cookies that are indispensable for your visit to the Website and the correct use thereof

Functional cookies

Cookies that make it easier and more pleasant for you to visit the Website, for example by personalising your browsing experience.

Performance cookies

Cookies that collect information about your use of the Website in order to improve the content of the Website and adapt it to the wishes of the User.

Third-party cookies

Cookies placed by third parties who offer their own services via the Website, such as social media, advertisements or video services.