Please wait

Your message is being sent

An error occurred

Analytical measurement and testing

Chromatography

Cleaning and sterilisation

Cleanroom

Distillation, separation, filtration

Environmental-, soil-, water-, food analysis

General laboratory consumables

Heating and cooling technology

Life sciences

Liquid handling

Occupational safety, security

Optical instruments and microscopes

Sample preparation

Stirring, shaking, mixing

Vacuum technology, drying, dry storage

700701702703704705
Power supplies POWERpro for gel electrophoresis tanks | Type: POWERpro 300, Supply requirements: 5-300 V / 1-700 mA, Power W: 150
Power supplies POWERpro for gel electrophoresis tanks | Type: POWERpro 300, Supply requirements: 5-300 V / 1-700 mA, Power W: 150
Brand: siehe 9400264 Thistle ScientifAvailable in 3 variantsThe POWERpro series is perfectly suited to use with all Cleaver Scientific horizontal multiSUB™ systems and omniPAGE mini vertical gel units, and may also be adapted for specialist techniques including the Comet Assay, and clinical and high throughput horizontal electrophoresis.Microprocessor controled with 5 sets of power terminals allow simultaneous operationContinuous run or timed setting up to 999 minutesProgrammable with multi step protocols for advanced electrophoresis methodsStores preset programs for each Cleaver Scientific electrophoresis systemAlarm function2.4" TFT displayStackable designRigorous in-built safety mechansimsAutomatic crossoverDual voltage compatibility
€699,72
Power Supply Consort Maxi EV3020 | Type: EV3020, Supply requirements: 230 V
Power Supply Consort Maxi EV3020 | Type: EV3020, Supply requirements: 230 V
Brand: siehe 9400264 Thistle Scientif4 output terminals to allow up to 4 simultaneous runs. Powerful microprocessor control allows complex programming, while manual mode permits the setting of voltage, current, power and time for routine electrophoretic runs. The parameters may also be changed temporarily without interrupting the run.LCD displayData loggingReal time clock
€2.096,78
Power supply for pipette controller pipetus®, bottle-top dispensers and digital burettes opus® | Plug type: EU / UK / US, Type of auxiliary energy: 100 ... 240 V, For: pipetus® / opus® dispenser / opus® titration
Power supply for pipette controller pipetus®, bottle-top dispensers and digital burettes opus® | Plug type: EU / UK / US, Type of auxiliary energy: 100 ... 240 V, For: pipetus® / opus® dispenser / opus® titration
Brand: Hirschmann Laborgeräte GmbH
€49,25
Power supply nanoPAC-300 Mini for gel electrophoresis tanks | Type: nanoPAC-300P Mini, Power W: 60, Supply requirements: 100 ... 240 V, 50 ... 60 Hz, 2,5 A
Power supply nanoPAC-300 Mini for gel electrophoresis tanks | Type: nanoPAC-300P Mini, Power W: 60, Supply requirements: 100 ... 240 V, 50 ... 60 Hz, 2,5 A
Brand: siehe 9400264 Thistle ScientifThe nanoPAC-300 is capable of running all Cleaver Scientific horizontal multiSUB™ systems and vertical omniPAGE mini gel systems.Maximum constant current output of 400mASimple two step feature to set a programmable change in voltage, current and time during the runConstant voltage up to 300 VAdjustable in 1 V and 1 mA incrementsTwo parallel outputsContinuous run or timed setting up to 999 minutesAutomatic safety shutdownAlarm functionEasy-to-clean polycarbonate housing3-digit LED display
€555,48
Power supply unit for Immersion stirrer ZU 6955 | Description: Power supply unit, 230 V
Power supply unit for Immersion stirrer ZU 6955 | Description: Power supply unit, 230 V
Brand: Knick Elektronische
€139,00
PP Short Thread Seals ND 9, ready assembled | Caps: yellow, with hole, Septa: Natural rubber, red-orange / TEF transparent, Hardness: 60° shore A
PP Short Thread Seals ND 9, ready assembled | Caps: yellow, with hole, Septa: Natural rubber, red-orange / TEF transparent, Hardness: 60° shore A
Brand: La-Pha-Pack GmbHAvailable in 12 variants
€149,71
Pre-filter | Type: SR 221
Pre-filter | Type: SR 221
Brand: Johann W. Schimmel GmbHUsed to protect the main filter thereby increasing its lifespan.
€2,55
Pre-filters, glass microfibre, type 134 | Ø mm: 124, Type: A
Pre-filters, glass microfibre, type 134 | Ø mm: 124, Type: A
Brand: Sartorius Lab InstrumentsAvailable in 17 variantsThe standard glass fibre pre-filter, placed directly on top of the membrane filter. With acrylic latex binder (4% to 6%, determined by ashing).TypeA: standard glass fiber filterB: extra thick glass fiber filterC: binder-free glass fiber filter
€121,00
Pre-treated RC Dialysis Tubing Spectra/Por® 7 | Type: Spectra/Por® 7, 1 kD MWCO, Flat width mm: 38, Ø mm: 24.2
Pre-treated RC Dialysis Tubing Spectra/Por® 7 | Type: Spectra/Por® 7, 1 kD MWCO, Flat width mm: 38, Ø mm: 24.2
Brand: Repligen Europe B.V.Available in 28 variantsRC dialysis tubing treated to remove trace levels of heavy metals and sulphide compounds. Ready-to-use Dialysis Tubing already equilibrated in water and supplied in 0.05 % sodium azide solution. Simply rinse away the preservative solution with DI water, load the sample and dialyze.
€394,00
Pre-treatment cartridges Progard® for water purification systems | Type: Progard® T3, For: Milli-Q® Direct
Pre-treatment cartridges Progard® for water purification systems | Type: Progard® T3, For: Milli-Q® Direct
Brand: Millipore GmbHAvailable in 4 variantsThe pre-treatment cartridges contain polyphosphates, activated carbon and depth filter for water pre-treatment and serve to protect reverse osmosis membrane against organic fouling, chlorine oxidation, and mineral scaling.
€527,00
Pre-wetted RC Dialysis Tubing Spectra/Por® 6 | Type: Spectra/Por® 6, 50 kD MWCO, Flat width mm: 34, Ø mm: 21.6
Pre-wetted RC Dialysis Tubing Spectra/Por® 6 | Type: Spectra/Por® 6, 50 kD MWCO, Flat width mm: 34, Ø mm: 21.6
Brand: Repligen Europe B.V.Available in 28 variantsRC dialysis tubing supplied pre-wetted with glycerol removed for convenience in 0.05 % sodium azide solution. Simply rinse away the preservative solution with DI water, load the sample and dialyze.
€465,00
Precision balance EHA | Type: EHA 3000-1, Max. load: 3000 g, Readability: 0,1 g
Precision balance EHA | Type: EHA 3000-1, Max. load: 3000 g, Readability: 0,1 g
Brand: Kern & Sohn GmbHAvailable in 5 variantsThe compact all-round model for laboratory, industry and teaching.High precisionLarge, shock proof weighing plate made from stainless steelParticularly flat designSimple and convenient 5-key operationLevel indicator and levelling feet as standardAdjusting program CAL for quick setting of the balance accuracyBattery operationUniversal mains adapter EU, GB
€95,00
700701702703704705

Copyright © 2026 - Achrom nv - BE 0445.025.508    |    General terms    |    Cookiebeleid    |    Privacybeleid    |    Handcrafted by CrayonCru®

Our website uses cookies.
Both we and our third-party partners use cookies. Some are strictly necessary for the site to function, but there are also optional cookies.

Necessary and functional cookies are always on. If you click "accept all cookies", you also accept the optional cookies. You can choose which cookies you want to enable via "set preferences".

Our website uses cookies.
What are cookies? What cookies do we use and why? Read more in our cookie policy

Necessary cookies

Cookies that are indispensable for your visit to the Website and the correct use thereof

Functional cookies

Cookies that make it easier and more pleasant for you to visit the Website, for example by personalising your browsing experience.

Performance cookies

Cookies that collect information about your use of the Website in order to improve the content of the Website and adapt it to the wishes of the User.

Third-party cookies

Cookies placed by third parties who offer their own services via the Website, such as social media, advertisements or video services.