Please wait

Your message is being sent

An error occurred

Analytical measurement and testing

Chromatography

Cleaning and sterilisation

Cleanroom

Distillation, separation, filtration

Environmental-, soil-, water-, food analysis

General laboratory consumables

Heating and cooling technology

Life sciences

Liquid handling

Occupational safety, security

Optical instruments and microscopes

Sample preparation

Stirring, shaking, mixing

Vacuum technology, drying, dry storage

Tintometer GmbH
345678
BOD-Measurement-System BD 600 | Type: Kaliumhydroxid-Lösung, Description: 50 ml, 45 %
BOD-Measurement-System BD 600 | Type: Kaliumhydroxid-Lösung, Description: 50 ml, 45 %
Brand: Tintometer GmbHAvailable in 10 variantsBOD measurement is an important measurement of the effects of domestic and industrial waste water on sewage plants and outflow points. The sensor system BD 600 is a 6 sample system that allows precise measurements of BOD based on the manometric principle. Manometric respirometers relate oxygen uptake to the change in pressure caused by oxygen consumption while maintaining a constant volume. Due to the modern integral pressure sensors, it is not necessary to use mercury for the measurements. The BOD values are stored automatically in the sensor memory at regular intervals and can be called up on the large-format display at any time without the need for time-consuming conversion using factors. This means that test series that end on a Sunday can be evaluated during the following week without any problem. Measurement series can be stored on USB stick/ SD card or transferred via USB cable to evaluate the data on a computer. The measurement period is user-selectable between 1 and 28 days to suit the application. While short measurement periods are useful for scientific applications, standard BOD measurements typically extend over a period of 5 days - and manometric determination of OECD, for example, generally takes place over a period of 28 days.Scope of supply:BD 600, complete unit with 6 or 12* sensor heads and control unit with batteriesPower supply unit incl. Y-cable for common power supply of BD 600 and stirring unitInductive stirring unit6 or 12* sample bottles6 or 12* rubber gaskets6 or 12* magnetic stirring rods1 overflow flask, 157 ml1 overflow flask, 428 ml1 bottle, 50 ml potassium hydroxide solution1 bottle, 50 ml nitrification inhibitor solution1 instruction manualremote control
€16,70
BOD-Measurement-System BD 600 | Type: Nitrification inhibitor (N-ATH), Description: liquid, bottle of 50 ml
BOD-Measurement-System BD 600 | Type: Nitrification inhibitor (N-ATH), Description: liquid, bottle of 50 ml
Brand: Tintometer GmbHAvailable in 10 variantsBOD measurement is an important measurement of the effects of domestic and industrial waste water on sewage plants and outflow points. The sensor system BD 600 is a 6 sample system that allows precise measurements of BOD based on the manometric principle. Manometric respirometers relate oxygen uptake to the change in pressure caused by oxygen consumption while maintaining a constant volume. Due to the modern integral pressure sensors, it is not necessary to use mercury for the measurements. The BOD values are stored automatically in the sensor memory at regular intervals and can be called up on the large-format display at any time without the need for time-consuming conversion using factors. This means that test series that end on a Sunday can be evaluated during the following week without any problem. Measurement series can be stored on USB stick/ SD card or transferred via USB cable to evaluate the data on a computer. The measurement period is user-selectable between 1 and 28 days to suit the application. While short measurement periods are useful for scientific applications, standard BOD measurements typically extend over a period of 5 days - and manometric determination of OECD, for example, generally takes place over a period of 28 days.Scope of supply:BD 600, complete unit with 6 or 12* sensor heads and control unit with batteriesPower supply unit incl. Y-cable for common power supply of BD 600 and stirring unitInductive stirring unit6 or 12* sample bottles6 or 12* rubber gaskets6 or 12* magnetic stirring rods1 overflow flask, 157 ml1 overflow flask, 428 ml1 bottle, 50 ml potassium hydroxide solution1 bottle, 50 ml nitrification inhibitor solution1 instruction manualremote control
€26,10
BOD-Measurement-System BD 600 | Type: Rubber sleeve (4.5 cm)
BOD-Measurement-System BD 600 | Type: Rubber sleeve (4.5 cm)
Brand: Tintometer GmbHAvailable in 10 variantsBOD measurement is an important measurement of the effects of domestic and industrial waste water on sewage plants and outflow points. The sensor system BD 600 is a 6 sample system that allows precise measurements of BOD based on the manometric principle. Manometric respirometers relate oxygen uptake to the change in pressure caused by oxygen consumption while maintaining a constant volume. Due to the modern integral pressure sensors, it is not necessary to use mercury for the measurements. The BOD values are stored automatically in the sensor memory at regular intervals and can be called up on the large-format display at any time without the need for time-consuming conversion using factors. This means that test series that end on a Sunday can be evaluated during the following week without any problem. Measurement series can be stored on USB stick/ SD card or transferred via USB cable to evaluate the data on a computer. The measurement period is user-selectable between 1 and 28 days to suit the application. While short measurement periods are useful for scientific applications, standard BOD measurements typically extend over a period of 5 days - and manometric determination of OECD, for example, generally takes place over a period of 28 days.Scope of supply:BD 600, complete unit with 6 or 12* sensor heads and control unit with batteriesPower supply unit incl. Y-cable for common power supply of BD 600 and stirring unitInductive stirring unit6 or 12* sample bottles6 or 12* rubber gaskets6 or 12* magnetic stirring rods1 overflow flask, 157 ml1 overflow flask, 428 ml1 bottle, 50 ml potassium hydroxide solution1 bottle, 50 ml nitrification inhibitor solution1 instruction manualremote control
€8,90
BOD-Measurement-System BD 600 | Type: Rubber sleeve (6.5 cm)
BOD-Measurement-System BD 600 | Type: Rubber sleeve (6.5 cm)
Brand: Tintometer GmbHAvailable in 10 variantsBOD measurement is an important measurement of the effects of domestic and industrial waste water on sewage plants and outflow points. The sensor system BD 600 is a 6 sample system that allows precise measurements of BOD based on the manometric principle. Manometric respirometers relate oxygen uptake to the change in pressure caused by oxygen consumption while maintaining a constant volume. Due to the modern integral pressure sensors, it is not necessary to use mercury for the measurements. The BOD values are stored automatically in the sensor memory at regular intervals and can be called up on the large-format display at any time without the need for time-consuming conversion using factors. This means that test series that end on a Sunday can be evaluated during the following week without any problem. Measurement series can be stored on USB stick/ SD card or transferred via USB cable to evaluate the data on a computer. The measurement period is user-selectable between 1 and 28 days to suit the application. While short measurement periods are useful for scientific applications, standard BOD measurements typically extend over a period of 5 days - and manometric determination of OECD, for example, generally takes place over a period of 28 days.Scope of supply:BD 600, complete unit with 6 or 12* sensor heads and control unit with batteriesPower supply unit incl. Y-cable for common power supply of BD 600 and stirring unitInductive stirring unit6 or 12* sample bottles6 or 12* rubber gaskets6 or 12* magnetic stirring rods1 overflow flask, 157 ml1 overflow flask, 428 ml1 bottle, 50 ml potassium hydroxide solution1 bottle, 50 ml nitrification inhibitor solution1 instruction manualremote control
€8,90
Brush 20 cm
Brush 20 cm
€7,20
BSB sensor head oxidirect
BSB sensor head oxidirect
€236,60
Buffer tablets for Pocket Tester Lovibond® | Type: Buffer tablets pH 10, For: Buffer
Buffer tablets for Pocket Tester Lovibond® | Type: Buffer tablets pH 10, For: Buffer
Brand: Tintometer GmbHAvailable in 3 variants
€24,60
Buffer tablets for Pocket Tester Lovibond® | Type: Buffer tablets pH 4, For: Buffer
Buffer tablets for Pocket Tester Lovibond® | Type: Buffer tablets pH 4, For: Buffer
Brand: Tintometer GmbHAvailable in 3 variants
€24,60
Buffer tablets for Pocket Tester Lovibond® | Type: Buffer tablets pH 7, For: Buffer
Buffer tablets for Pocket Tester Lovibond® | Type: Buffer tablets pH 7, For: Buffer
Brand: Tintometer GmbHAvailable in 3 variants
€24,60
Calibration and Storage solutions for pH/Redox-Meter SD 305 pH | Description: Calibration solution Redox, 470 mV, 100 ml, NIST
Calibration and Storage solutions for pH/Redox-Meter SD 305 pH | Description: Calibration solution Redox, 470 mV, 100 ml, NIST
Brand: Tintometer GmbHAvailable in 8 variants
€15,10
Calibration and Storage solutions for pH/Redox-Meter SD 305 pH | Description: pH buffer solution 10.00 (25 °C) blue, 90 ml, NIST
Calibration and Storage solutions for pH/Redox-Meter SD 305 pH | Description: pH buffer solution 10.00 (25 °C) blue, 90 ml, NIST
Brand: Tintometer GmbHAvailable in 8 variants
€6,30
Calibration and Storage solutions for pH/Redox-Meter SD 305 pH | Description: pH buffer solution 7.00 (25 °C) yellow, 90 ml, NIST
Calibration and Storage solutions for pH/Redox-Meter SD 305 pH | Description: pH buffer solution 7.00 (25 °C) yellow, 90 ml, NIST
Brand: Tintometer GmbHAvailable in 8 variants
€6,30
345678

Copyright © 2024 - Achrom nv - BE 0445.025.508    |    General terms    |    Cookiebeleid    |    Privacybeleid    |    Handcrafted by CrayonCru®

Our website uses cookies.
Both we and our third-party partners use cookies. Some are strictly necessary for the site to function, but there are also optional cookies.

Necessary and functional cookies are always on. If you click "accept all cookies", you also accept the optional cookies. You can choose which cookies you want to enable via "set preferences".

Our website uses cookies.
What are cookies? What cookies do we use and why? Read more in our cookie policy

Necessary cookies

Cookies that are indispensable for your visit to the Website and the correct use thereof

Functional cookies

Cookies that make it easier and more pleasant for you to visit the Website, for example by personalising your browsing experience.

Performance cookies

Cookies that collect information about your use of the Website in order to improve the content of the Website and adapt it to the wishes of the User.

Third-party cookies

Cookies placed by third parties who offer their own services via the Website, such as social media, advertisements or video services.