Please wait

Your message is being sent

An error occurred

Analytical measurement and testing

Chromatography

Cleaning and sterilisation

Cleanroom

Distillation, separation, filtration

Environmental-, soil-, water-, food analysis

General laboratory consumables

Heating and cooling technology

Life sciences

Liquid handling

Occupational safety, security

Optical instruments and microscopes

Sample preparation

Stirring, shaking, mixing

Vacuum technology, drying, dry storage

563564565566567568
Metal-cased heating mantles series KM-MHB | Capacity ml: 400, Flask diam. mm: 70, Power W: 200
Metal-cased heating mantles series KM-MHB | Capacity ml: 400, Flask diam. mm: 70, Power W: 200
Brand: ISOHEAT GmbHAvailable in 2 variantsLabHEAT® - Heating mantles for high form beakers. Flexible glass yarn heating element in plastic coated, chemical-resistant metal housing, with built-in power-on and heating zone switch, max. heating element temperature 450 °C; 1.5 m power supply (earthed) cable and RCD (residual current detection); nominal voltage 230 V AC.
€455,00
Metal-cased heating mantles series KM-MNB | Capacity ml: 600, Flask diam. mm: 90, Power W: 260
Metal-cased heating mantles series KM-MNB | Capacity ml: 600, Flask diam. mm: 90, Power W: 260
Brand: ISOHEAT GmbHAvailable in 5 variantsLabHEAT® - Heating mantles for low form beakers. Flexible glass yarn heating element in plastic coated, chemical-resistant metal housing, with built-in power-on and heating zone switch, max. heating element temperature 450 °C; 1.5 m power supply (earthed) cable and RCD (residual current detection); nominal voltage 230 V AC.
€403,00
Metal-cased heating mantles, series KM-MEB | Capacity ml: 250, Flask diam. mm: 85, Power W: 150
Metal-cased heating mantles, series KM-MEB | Capacity ml: 250, Flask diam. mm: 85, Power W: 150
Brand: ISOHEAT GmbHAvailable in 4 variantsWith corrosion-resistant stainless steel heating bowl to protect against leaking liquid resulting of a broken flask.increased working safety in the labplastic-coated, chemically resistant metal housingpredrilled threaded hole on rear allows to fix the stativ clamp2 heating zoneswith built-in controller allows a continuous adjustment of power outletthermally insulated and earthed with built-in heating zone switch and residual current detection (RCD)
€437,00
Micro Balances BM | Type: BM-252, Max. load: 250 g, Readability: 0,01 mg
Micro Balances BM | Type: BM-252, Max. load: 250 g, Readability: 0,01 mg
Brand: A&D Instruments LimitedAvailable in 3 variantsAnalytical Balances with easy removal of static electricity via a built-in fan-free ionizer and anti-static windshield. Wide range of accessories for a variety of applications, e.g. holder for microcentrifuge tubes or aluminium vessels.Clearly readable, white-lit LCD displayLarge weighing chamber, suitable for flasksIntegrated sensors for temperature, humidity and air pressureInternal calibration automatic, based on temperature change, manual, triggered by the operatorWeighing units: g, mg, oz, ozt, ct, mom, dwt, GN, Tael, Tola, piece (counting), %Memory up to 200 data setsRS-232C interface and Quick USB Standard.
€7.300,00
Micro balances, BA | Type: BA-6E, Max. load: 6,2 g, Readability: 0,001 mg
Micro balances, BA | Type: BA-6E, Max. load: 6,2 g, Readability: 0,001 mg
Brand: A&D Instruments LimitedAvailable in 2 variantsReverse-backlit LCD displayAdditional inner windshieldData memory functionEquipped with external ionizer against static chargeInterfaces: RS-232C, USB-B (mini-B)
€17.268,00
Micro balances, BA-T | Type: BA-6DTE, Max. load: 2,1/6,2 g, Readability: 0.001 / 0.01 mg
Micro balances, BA-T | Type: BA-6DTE, Max. load: 2,1/6,2 g, Readability: 0.001 / 0.01 mg
Brand: A&D Instruments LimitedAvailable in 2 variants5 inch colour touchscreenAdditional inner windshieldMultiple languagesIR sensors can also be used for contactless operation of the RE-ZERO or PRINT commandHPLC mode for preparing buffer solutionsSmart routine check (SRC) functionOn-screen levelling assistStatistical calculation function (SCF)All models are equipped with an external ionizer against static chargeInterfaces: RS-232C, USB-B (mini-B), USB-A for USB flash drives, Ethernet
€16.741,00
Micro Ball Mill GT300 | Type: Micro Ball Mill GT300, Min. speed rpm: 180, Max. speed rpm: 1800
Micro Ball Mill GT300 | Type: Micro Ball Mill GT300, Min. speed rpm: 180, Max. speed rpm: 1800
Brand: Beijing GrinderFor grinding and mixing of hard, medium-hard, soft, elastic and fibrous samples. Also suitable for cell disruption and DNA/RNA extraction. The mill is designed for very short processing times and high sample throughput. The grinding containers carry out horizontal, circular-arc-shaped oscillations and the grinding balls ensure effective grinding and mixing of the sample.Only 30 seconds average processing time2 grinding stations for bowls with a volume of 5 to 50 mlMultifunctional clamping device, which also holds adapters for reaction vesselsGrinding time digitally adjustable from 1 second to 100 minutesVariable speed from 180 to 1800 min-1Control via LCD displayProgrammable grinding parameters, up to 10 programs can be storedTransparent coverSafety interlockGrinding chamber, clamping system and swivel arm made of stainless steelMaintenance-free direct driveGrinding bowls made of different materials with volumes up to 50 ml available as accessoriesGrinding bowls and balls are not included in the scope of supply and must be ordered separately.
€5.986,58
Micro burettes acc. to Bang, DURAN®, class AS, certified conformity, with glass key | Nominal capacity: 2 ml, Division: 0.01 ml, Tolerance: 0.01 ml
Micro burettes acc. to Bang, DURAN®, class AS, certified conformity, with glass key | Nominal capacity: 2 ml, Division: 0.01 ml, Tolerance: 0.01 ml
Brand: Hirschmann Laborgeräte GmbHAvailable in 6 variantsBlue graduated, with dated batch identification. Straight stopcock and stopcock on filling tube available with standard ground glass key or PTFE key. Schellbach stripe for enhanced legibility, main point ring graduation. Calibrated for EX, DIN EN ISO 385.Additional batch certificates can be generated and printed at any time free of charge on the manufacturer's website.
€159,00
Micro burettes acc. to Bang, DURAN®, class AS, with stand | Nominal capacity: 5 ml, Division: 0.02 ml, Tolerance: 0.01 ml
Micro burettes acc. to Bang, DURAN®, class AS, with stand | Nominal capacity: 5 ml, Division: 0.02 ml, Tolerance: 0.01 ml
Brand: Hirschmann Laborgeräte GmbHAvailable in 3 variantsBlue graduated, certified conformity, with dated batch identification. With stand. Straight stopcock and stopcock on filling tube with standard ground glass key. Schellbach stripe for enhanced legibility, main point ring graduation. Calibrated for EX, DIN EN ISO 385.Additional batch certificates can be generated and printed at any time free of charge on the manufacturer's website.
€196,00
Micro burettes, Bang pattern, borosilicate glass 3.3, Class AS | Capacity ml: 10, Grad. ml: 0.02, Tolerance ± ml: 0.02
Micro burettes, Bang pattern, borosilicate glass 3.3, Class AS | Capacity ml: 10, Grad. ml: 0.02, Tolerance ± ml: 0.02
Brand: BRAND GMBH + CO.KGAvailable in 6 variantsBLAUBRAND®, class AS, DE-M marking. Boro 3.3. DIN EN ISO 385. Calibrated to deliver (TD, EX). Schellbach stripe. With straight needle valve stopcock with PTFE spindle (PTFE key in intermediate stopcock). All Blaubrand® burettes are delivered with batch number and one batch certificate included per manufacturer's pack. Also available with individual works, USP or DAkkS (former DKD) calibration certificate, please enquire.The batch certificate is also available to download from the manufacturer's website.
€188,25
Micro burettes, Bang pattern, borosilicate glass 3.3, Class AS, with DAkkS calibration certificate | Capacity ml: 2, Type: With straight stopcock, Grad. ml: 0.01
Micro burettes, Bang pattern, borosilicate glass 3.3, Class AS, with DAkkS calibration certificate | Capacity ml: 2, Type: With straight stopcock, Grad. ml: 0.01
Brand: BRAND GMBH + CO.KGAll Blaubrand® burettes are supplied with batch number and one batch certificate per packing unit. On request, they are also available with an individual certificate or USP individual certificate. Batch and individual certificates can also be downloaded at the supplier's website.BLAUBRAND®Straight stopcockDE-M markingDIN EN ISO 385Calibrated to deliver (TD, EX)Schellbach stripeNeedle valve stopcock with PTFE spindle (PTFE key in intermediate stopcock)
€254,80
Micro capillaries | Nominal capacity: 2.0 µl
Micro capillaries | Nominal capacity: 2.0 µl
Brand: Bionis SASAvailable in 5 variantsThese disposable micro capillaries fill automatically from end to end. Their accuracy is better than 1%. A capillary tube holder is supplied with each pack. Also contains a small bulb with aperture which can be inserted into capillary and used as an effective support for filling and emptying tubes.
€21,00
563564565566567568

Copyright © 2026 - Achrom nv - BE 0445.025.508    |    General terms    |    Cookiebeleid    |    Privacybeleid    |    Handcrafted by CrayonCru®

Our website uses cookies.
Both we and our third-party partners use cookies. Some are strictly necessary for the site to function, but there are also optional cookies.

Necessary and functional cookies are always on. If you click "accept all cookies", you also accept the optional cookies. You can choose which cookies you want to enable via "set preferences".

Our website uses cookies.
What are cookies? What cookies do we use and why? Read more in our cookie policy

Necessary cookies

Cookies that are indispensable for your visit to the Website and the correct use thereof

Functional cookies

Cookies that make it easier and more pleasant for you to visit the Website, for example by personalising your browsing experience.

Performance cookies

Cookies that collect information about your use of the Website in order to improve the content of the Website and adapt it to the wishes of the User.

Third-party cookies

Cookies placed by third parties who offer their own services via the Website, such as social media, advertisements or video services.