Please wait

Your message is being sent

An error occurred

Analytical measurement and testing

Chromatography

Cleaning and sterilisation

Cleanroom

Distillation, separation, filtration

Environmental-, soil-, water-, food analysis

General laboratory consumables

Heating and cooling technology

Life sciences

Liquid handling

Occupational safety, security

Optical instruments and microscopes

Sample preparation

Stirring, shaking, mixing

Vacuum technology, drying, dry storage

475476477478479480
Laboratory paddle blender MiniMix® 100 | Type: MiniMix® 100 P CC®, Volume ml: 80 ... 100
Laboratory paddle blender MiniMix® 100 | Type: MiniMix® 100 P CC®, Volume ml: 80 ... 100
Brand: interscienceAvailable in 2 variantsMiniMix® 100 paddle blenders, from the BagMixer® range, guarantees a quick and accurate blending of small samples. Thanks to the adjustable paddle system, blending is at its best. MiniMix® 100 is ideal for medical, veterinary and microbiological analysis.
€3.511,90
Laboratory peristaltic pumps FH10 | Type : FH10, Inputs : 1, Flow rate ml/min. : 0.002 - 1.65
Laboratory peristaltic pumps FH10 | Type : FH10, Inputs : 1, Flow rate ml/min. : 0.002 - 1.65
Brand: Thermo Elect.LED GmbH (Kendro)Simple, fast tubing changesFixed occlusion eliminates adjustment after tubing changes and assures operation against pressure up to 30 PSIGContamination free pumping fluid contacts only the tubing materialControls are mounted on front panel with a separate single-turn speed controlFlow direction switch with center "OFF" positionGreen LED power "ON" indicator"Prime" button runs pump at maximum speed to rapidly prime or flush tubingReversible pump direction permits purging of tubing prior to useFlow rates less than 2 ìl/min to 105 ml/minPressure up to 2.5 bar (30 PSIG)Accurate and repeatable flow deliveryFiltration, up to 60 PSIGAddress a wide range of critical applications with tubing materials that are approved to USP class VI, FDA and NSF standardsAccommodates all sizes and formulations of microbore flow rated tubing ergonomic designSpace efficient low profile, stackable designRemote capability actuate unit with a foot switch or contact closure
€887,00
Laboratory peristaltic pumps, PLP | Type: PLP 1000, Flow rate ml/min.: 250 - 1000, Weight g: 1440
Laboratory peristaltic pumps, PLP | Type: PLP 1000, Flow rate ml/min.: 250 - 1000, Weight g: 1440
Brand: Behr Labor-Technik GmbHAvailable in 4 variantsThe behrotest peristaltic pumps PLP are suitable for the transport of watery solutions / non aggressive applications.They find their application in the laboratory, the food industry as well as in the analytical, medicinal or biological field.The RPM (rotation per minute) can be adjusted manually and the flow direction can be amended.These PLP pumps have angle connectors to which tubing can be attached either with or without additional brackets, depending on the tube size.
€621,00
Laboratory pH meter 766 | Type: Laboratory pH meter 766 SET A
Laboratory pH meter 766 | Type: Laboratory pH meter 766 SET A
Brand: Knick ElektronischeAvailable in 3 variantsLaboratory pH meter for standard laboratory applicationsGaincheck® performs a complete instrument check. At the touch of a button it not only checks electrical features, but also display and keypad. A short check after power-on automatically reviews efficiency of instrument functions.Drycheck® monitors electrode impedance and alerts to electrode dry-up even in stand-by mode.Sensoface® monitors the electrode performance and provides information on its condition, by evaluating zero point, transconductance and electrode impedanceTrueline® delivers a calibrated analog line recorder signalCalimatic®, which automatically recognises the correct buffer, calibrates safely and easily at the touch of a button. EMC design protects instrument against electromagnetic interference. CE compliant and follows the EMC guidelines. Case made of glass reinforced PA12, stainless steel cover, IP 54 protective system, ready for connection to ZU 6954 attachment stand. Alphanumeric display, 2 x 4 digits, 14 segment LED, character height 13 mm, 3 Sensoface status indicators.Electrode monitoringSensoface®: Evaluates zero point, transconductance, response time and electrode impedance, good/average/poor optical display gives information on electrode condition, can be disabled.Drycheck®: Monitors electrode impedance for dry-up, glass breakage and defective connections also in stand-by mode. Calibration timer monitors calibration intervals.Instrument self-test system:Gaincheck®: Tests electrode and memory data and monitors the measuring circuit and measurement value analysis. Results of all test stages are displayed.Laboratory pH meter 766, includes mains cable and 3 year guarantee.Laboratory pH meter 766 SET A, with mains cable and pH/Pt 1000 SE 101 combination electrode (Plastic, 110 mm).Laboratory pH meter 766 SET B, with mains cable and pH/Pt 1000 SE 100 combination electrode (Glass, 165 mm).
€1.217,00
Laboratory pH meter Knick 765 | Type: Laboratory pH meter 765 SET
Laboratory pH meter Knick 765 | Type: Laboratory pH meter 765 SET
Brand: Knick ElektronischeAvailable in 2 variantsWith many safety features making pH measurement easier and more reliable.Fullcheck® automatically checks instrument function from input socket to recorder output. Functional efficiency of the instrument can be documented as part of quality management in accordance with DIN EN ISO 9000 using a test print. Drycheck® monitors electrode impedance and alerts to electrode dry-up, glass breakage and defective connections even in stand-by mode. Sensoface® monitors the electrode performance and gives information on electrode condition, evaluating zero point, transductance, response time, electrode impedance and calibration intervals.Trueline® delivers a calibrated analog recorder signal (electrically isolated). Calimatic® automatically recognises the correct buffer. EMC design protects instrument from electromagnetic interference. The 765 laboratory pH meter complies fully with NAMUR (German committee for measurement and control standards in the chemical industry) EMC recommendations.Temperature compensation is either automatic with a Pt 100 or Pt 1000 sensor or manual. Data can be processed immediately by a computer via standard RS 232 interface. Direct output to a printer is also possible. Large, bright LED display enables simultaneous readout of 2 measured values, such as pH value and temperature.Case made of glass reinforced PA, with non-rusting, stainless steel, IP 54 protection level cover, ready for connection of ZU 6954 electrode stand.Alpahnumerical display, 2 x 4 digits, 14 segment, 13 mm characters, 3 Sensoface status indicators.Interface:RS 232 without control lines, galvanically isolated, printer or computer interface.Printer control:Via serial interface for ZU 0244 or other standard printers, printing at the touch of a button or via print interval timer 0.1 to 999.9 min.Electrode monitoring:Sensoface®:analysis of zero point, transductance, response time and electrode glass impedance, good/average/poor optical display for monitoring electrode condition can be disabled.Drycheck®: Monitors electrode impedance and alerts to electrode dry-up, glass breakage and defective connections even in stand-by mode. Calibration timer monitors calibration interval.Instrument self-test system:Fullcheck®: tests all measurement electronics, including analogue output, segment and keyboard test in diagnostic mode, automatic short test after power-on, QM documentation print-outs according to DIN EN ISO 9000 retrievable in diagnostic mode or via interface (printer).Laboratory pH meter 765, includes mains cable, electrode not included, 3 year guarantee.Laboratory pH meter 765 SET, with electrode statistics (Opt. 347), pH/Pt 1000 SE 100 combination electrode, ZU 6954 attachment stand and ZU 6928 buffer set (no other optional ancillary equipment available).
€2.347,00
Laboratory pots (baths) with lid | Nominal capacity: 7.0 l, Dimensions external (Ø x H): 240 x 170
Laboratory pots (baths) with lid | Nominal capacity: 7.0 l, Dimensions external (Ø x H): 240 x 170
Brand: BOCHEM Instrumente GmbHAvailable in 5 variants18/10 stainless steel. For boiling and simple water bath applications. With side handles and lid.
€169,26
Laboratory press MP250M, motorised | Type: MP250M
Laboratory press MP250M, motorised | Type: MP250M
Brand: Maassen GmbHThe motorised, hydraulic Laboratory press MP250M with pressure gauge is suitable for a variety of applications and a high sample throughput. The pressure is adjustable directly on the manometer. For press dies from 10 mm. With illuminated emergency stop button.Pressure build-up only possible with closed coverPressure built-up at the push of a buttonPressure release with manual valve
€6.861,25
Laboratory presses MP150 | Type: MP150
Laboratory presses MP150 | Type: MP150
Brand: Maassen GmbHAvailable in 2 variantsWith pressure gauge (MP150) or digital pressure display (MP150D). Press for up to 15 tons pressure. Recommended for press dies up to 18 mm. Please order press dies separately.
€4.140,00
Laboratory presses MP250 | Type: MP250D
Laboratory presses MP250 | Type: MP250D
Brand: Maassen GmbHAvailable in 2 variantsWith pressure gauge (MP250) or digital pressure display (MP250D). Press for up to 25 tons pressure. Recommended for press dies up to 50 mm.
€5.375,00
Laboratory reactor LR 1000 basic System | Type: LR 1000 basic Package
Laboratory reactor LR 1000 basic System | Type: LR 1000 basic Package
Brand: IKA-Werke GmbH & Co.KGAvailable in 2 variantsScope of supply: Basic device, laboratory reactor vessel LR 1000.1, sensor receptacle LR 1000.61, temperature sensor PT 100.30, support rod, 2 hose connectors for cooling hoses
€7.932,10
475476477478479480

Copyright © 2026 - Achrom nv - BE 0445.025.508    |    General terms    |    Cookiebeleid    |    Privacybeleid    |    Handcrafted by CrayonCru®

Our website uses cookies.
Both we and our third-party partners use cookies. Some are strictly necessary for the site to function, but there are also optional cookies.

Necessary and functional cookies are always on. If you click "accept all cookies", you also accept the optional cookies. You can choose which cookies you want to enable via "set preferences".

Our website uses cookies.
What are cookies? What cookies do we use and why? Read more in our cookie policy

Necessary cookies

Cookies that are indispensable for your visit to the Website and the correct use thereof

Functional cookies

Cookies that make it easier and more pleasant for you to visit the Website, for example by personalising your browsing experience.

Performance cookies

Cookies that collect information about your use of the Website in order to improve the content of the Website and adapt it to the wishes of the User.

Third-party cookies

Cookies placed by third parties who offer their own services via the Website, such as social media, advertisements or video services.