Please wait

Your message is being sent

An error occurred

Analytical measurement and testing

Chromatography

Cleaning and sterilisation

Cleanroom

Distillation, separation, filtration

Environmental-, soil-, water-, food analysis

General laboratory consumables

Heating and cooling technology

Life sciences

Liquid handling

Occupational safety, security

Optical instruments and microscopes

Sample preparation

Stirring, shaking, mixing

Vacuum technology, drying, dry storage

466467468469470471
Labels | Dimensions (W x D) mm: 33 x 13, Colour: Yellow, blue, green, red, orange, white, For vessels: 1.5/2.0 ml Tubes
Labels | Dimensions (W x D) mm: 33 x 13, Colour: Yellow, blue, green, red, orange, white, For vessels: 1.5/2.0 ml Tubes
Brand: ISOLAB Laborgeräte GmbHAvailable in 5 variantsManufactured from polyfiber grade flexible paper with acrylic resin adhesive back. This unique combination expands and retracts together with temperature fluctuations and alwaysguarantees a strong adhesive bond. Chemically inert, resists to water, moisture and most organic solvents and caustic agents. Can be used between -40 to 121 °C temperature range. Also withstands steam autoclaving cycle and gamma irradiation. Adheres to any clean surface including PTFE coated surfaces without cracking, peeling and degrading. Peels off without leaving any sticky residue. Recommended to be used on flat or round surfaces with different diameters. Supplied as 1000 label rolls packed in a dispenser box for practical use.
€220,70
Labels, writing | Width mm: 38
Labels, writing | Width mm: 38
Brand: Bel-Art ProductsAvailable in 3 variantsWhite. Adhere to almost all surfaces. Ideal when used in conjunction with label protection adhesive tape 9.040 425 to 450.
€56,80
Laboratory and hygienic tissues, 2-ply, bright white | Package contents: Carton of 32 boxes with 150 wipes
Laboratory and hygienic tissues, 2-ply, bright white | Package contents: Carton of 32 boxes with 150 wipes
Brand: Igefa GmbH & Co.KGAvailable in 2 variantsProfix all-purpose cosmetic wipes are made of cellulose. The pleasantly soft cosmetic wipes have a good absorbency and can also be used as laboratory wipes.
€47,70
Laboratory autoclaves CertoClav Connect | Type: Media sensor, PT100 *
Laboratory autoclaves CertoClav Connect | Type: Media sensor, PT100 *
Brand: CertoClav Sterilizer GmbHAvailable in 2 variantsThe fully automated, vertical laboratory autoclave is suitable for extended/ long- term cycles, material tests, HAST Test, pressure vessel test, ICP - TM 650, food preservation, culture media preparation, sterilisation of waste, unpackaged solids without hollow bodies, liquids, bottles, instruments, synthetic materials and rubber. It is operated via of a 7-inch high-resolution tablet. All operating steps are explained with videos directly on the tablet. Compliance with GLP requirements through automatic documentation of users and cycles. Process protocols are stored in the CertoCloud for 10 years. Integration into laboratory data systems possible. For autoclaving liquids, a PT100-media sensor is optionally available.Scope of suppy: Autoclave, stable instrument panel with 3 feeds, minimum water level indicator, power cable, tablet
€518,00
Laboratory autoclaves CertoClav MultiControl 2 | Type: MultiControl 2, Capacity l: 18, Working Temp. range °C: 20 ... 140
Laboratory autoclaves CertoClav MultiControl 2 | Type: MultiControl 2, Capacity l: 18, Working Temp. range °C: 20 ... 140
Brand: CertoClav Sterilizer GmbHThe PT100 sensor-controlled, vertical laboratory autoclave is suitable for extended/ long- term cycles, material tests, HAST test, pressure vessel test und ICP - TM 650, food preservation, culture media preparation, sterilisation of waste, unpackaged solids without hollow bodies, liquids, bottles, instruments, synthetic materials and rubber. Basic version of PC software for data monitoring is included. With this software, you can only set single-step programs. For multi-step programs, PC software professional version is required.The CertoClav MultiControl 2 Touch is additionally equipped with a 7-inch robust high-resolution tablet. The operating steps are explained with videos on the screen.Programmable from 1 minute to 30 days and from room temperature to 140 °CAutomated process control and error detectionUSB portPrinter port (RS232) for printing sterilisation protocolsScope of suppy:MultiControl 2: Autoclave, stable instrument panel with 3 feeds and minimum water level indicator, power cable, MC2 controllerMultiControl 2 touch: Autoclave, stable instrument panel with 3 feeds and minimum water level indicator, power cable, MC2 controller, tablet
€3.732,00
Laboratory autoclaves D-line | Type: 5075 EL-D, Capacity litres: 160, Dimensions (W x D x H) mm: 860 x 1120 x 740
Laboratory autoclaves D-line | Type: 5075 EL-D, Capacity litres: 160, Dimensions (W x D x H) mm: 860 x 1120 x 740
Brand: biomedis Vertriebsges. mbHAvailable in 2 variantsThe features of the laboratory autoclave line are specifically designed for most common laboratory applications and can be used for the sterilzation of liquids, instruments, glass, waste and for the preparation of nutrient media.EL = horizontal loadingELV = vertical loadingEL-CGD and ELV-CGD = with integrated steam generator and rapid coolingStores the last 200 cycles in built-in memoryOption: second flexible Pt 100 probe30 Identification Codes and Passwords for access level controlThe controller and software comply with the 21 CFR part 11 standardFilter replacement notifications based on the number of cyclesData archiving via USB interfaceDouble sterilization time monitoringIn/Out test (enables technicians to check each system component separately)Sterilization temperature range up 105 °C to 137 °COptional Disinfection/Isothermal Temperature range from 60°C to 105°C7 standard sterilisation programsOptions available Fast cooling technology and ventilator to reduce cooling time additionallyVacuum pump to evacuate residual airExhaust air filtrationLifting device to elevate/to lower heavy sterilzation goodsPrinter to document the performed cycle (Please order separately)R.PC.R software allows complete control and monitoring of the autoclave
€22.695,00
Laboratory autoclaves with heating | Type: La-MCS-204, Pressure bar: 4, Temperature °C: 151
Laboratory autoclaves with heating | Type: La-MCS-204, Pressure bar: 4, Temperature °C: 151
Brand: kein Lieferant der LLG (MaschiAvailable in 5 variantsFor pressurised steam sterilisation. Temperature control is monitored via a built-in PT 100 sensor. With 1 min. to 100 hours timer.An accessory media probe (Cat. No. 9.842 070), also Pt 100, can be connected. If the "media probe" button is switched on, the autoclave cools down to 60°C after sterilisation and maintains this temperature until the unit is switched off. Culture media can therefore be processed more easily.Chamber and lid made of stainless steel.La-VA-MCS.Fully automatic, 4 bar. With solenoid valve for automatically venting and pulsing steam when sterilising liquids. Safety catch is only temperature dependent when used with accessory media probe.
€6.044,20
Laboratory blender MemoryBlender2 | Type: MemoryBlender2 incl. sound protection hood, Min. speed rpm: 2000, Max. speed rpm: 15000
Laboratory blender MemoryBlender2 | Type: MemoryBlender2 incl. sound protection hood, Min. speed rpm: 2000, Max. speed rpm: 15000
Brand: Rotor siehe 9010382 FEUMAThe Laboratory Memory Blender 2 is a compact programmable commercial blender, driven by a high power ventilator cooled motor. The high-quality construction and the electronically controlled speed cycles guarantee a maximum performance. The microprocessor based controller features 6 push buttons with 12 optimized pre-programmed cycles which are suitable for most applications. Using the built-in "Memory" function, these cycles can be replaced with individual programs with different time and speed settings. Even the speed of the "Pulse" function can be changed. It's possible to disable the "Memory" function, to prevent unwanted overwriting. The blender can also be operated in a manual mode with 6 fixed speeds. The easy to understand LEDs show the state of the controller.The high performance programmable commercial silent blender.12 programmable cycles for automatic processing6 fixed speeds in manual modeVery quiet, space saving, solid and elegantPolished stainless steelEasy cleaningSafety features:By opening the plastic cover the motor stops immediatelyA protective switch prevents the motor from overloading and overheatingRugged main switchThe blender conforms to the international IEC standardsPlease order mixing containers separately.Before starting each operation the durability and resistance of all blender materials, e. g. glass, CNS, PP, rubber have to be checked concerning their tolerance against the substances to process.
€2.099,00
Laboratory Blender Waring®800 EG/S | Type: 800 ES, With: Stainless steel container, 1 l, Min. speed rpm: 22000
Laboratory Blender Waring®800 EG/S | Type: 800 ES, With: Stainless steel container, 1 l, Min. speed rpm: 22000
Brand: WaringAvailable in 2 variantsVersatile laboratory mixer ideally suited for general laboratory work. Supplied either with a 1 L stainless steel container or a 1.2 L glass container.One velocity setting (22000 rpm)Epoxy coated motor housingTwo-piece lid vinyl/styrene Scope of supply: Mixer, container (stainless steel or glass) with handle and lid.
€747,00
Laboratory Blender Waring®8010/8011 | Type: 8010EG, With: Glass container, 1.2 l, Min. speed rpm: 18000
Laboratory Blender Waring®8010/8011 | Type: 8010EG, With: Glass container, 1.2 l, Min. speed rpm: 18000
Brand: WaringAvailable in 4 variantsVersatile laboratory mixer ideally suited for general laboratory work. Supplied either with a 1 L stainless steel container or a 1.2 L glass container.Models 8010 EG/ES with mechanical timer (3 minutes).Two velocity settings (18000 or 22000 rpm)Epoxy coated motor housingTwo-piece lid vinyl/styreneScope of supply: Mixer, container (stainless steel or glass) with handle and lid
€1.220,00
Laboratory Blender Waring®LB20 EG/ES | Type: 20EG, With: Glass container, 1.2 l, Min. speed rpm: 500
Laboratory Blender Waring®LB20 EG/ES | Type: 20EG, With: Glass container, 1.2 l, Min. speed rpm: 500
Brand: WaringAvailable in 2 variantsVersatile laboratory mixer ideally suited for general laboratory work. Supplied either with a 1 L stainless steel container or a 1.2 L glass container.Variable velocity settings (500 or 22000 rpm)Epoxy coated motor housingTwo-piece lid vinyl/styrene Scope of supply: Mixer, container (stainless steel or glass) with handle and lid
€1.732,00
Laboratory Bottle system DURAN® YOUTILITY | Nominal capacity: 1000 ml, Ø: 93 mm
Laboratory Bottle system DURAN® YOUTILITY | Nominal capacity: 1000 ml, Ø: 93 mm
Brand: DWK Life Sciences GmbH (Duran)Available in 4 variantsSpecially shaped gripping zones on both sides of the bottle for easier and safer handlingWith the new YOUTILITY bottle thread opening or closing the bottle is significantly faster. The thread is fully compatible with DIN GL 45 closures and other accessoriesThe slimmer YOUTILITY bottle shape allows more optimal use of limited space in autoclaves and laboratory refrigeratorsA pre-defined labelling area is compatible with the dedicated DURAN® self-adhesive YOUTILITY bottle labelsNominal volume is shown at the top of the easy-to-read graduation scale for fast determination of the volumesGlass bottle body is moulded from the tried and tested DURAN® borosilicate 3.3 Type 1 neutral glass. DURAN® glass offers very good chemical resistance and high temperature resistanceThe YOUTILITY bottle has an integrated Retrace Code to allow full product traceability. The lot specific certificate of conformance is available at: www.duran-group.comEach DURAN® YOUTILITY bottle is supplied as a complete system, with a pouring ring (cyan polypropylene) and a GL 45 cap (cyan polypropylene)
€71,52
466467468469470471

Copyright © 2026 - Achrom nv - BE 0445.025.508    |    General terms    |    Cookiebeleid    |    Privacybeleid    |    Handcrafted by CrayonCru®

Our website uses cookies.
Both we and our third-party partners use cookies. Some are strictly necessary for the site to function, but there are also optional cookies.

Necessary and functional cookies are always on. If you click "accept all cookies", you also accept the optional cookies. You can choose which cookies you want to enable via "set preferences".

Our website uses cookies.
What are cookies? What cookies do we use and why? Read more in our cookie policy

Necessary cookies

Cookies that are indispensable for your visit to the Website and the correct use thereof

Functional cookies

Cookies that make it easier and more pleasant for you to visit the Website, for example by personalising your browsing experience.

Performance cookies

Cookies that collect information about your use of the Website in order to improve the content of the Website and adapt it to the wishes of the User.

Third-party cookies

Cookies placed by third parties who offer their own services via the Website, such as social media, advertisements or video services.