Please wait

Your message is being sent

An error occurred

Analytical measurement and testing

Chromatography

Cleaning and sterilisation

Cleanroom

Distillation, separation, filtration

Environmental-, soil-, water-, food analysis

General laboratory consumables

Heating and cooling technology

Life sciences

Liquid handling

Occupational safety, security

Optical instruments and microscopes

Sample preparation

Stirring, shaking, mixing

Vacuum technology, drying, dry storage

123456
Drum Pump PumpMaster | Description: NBR gasket, for petrochemical liquids, Colour: blue grey, Immersion depth mm: 95
Drum Pump PumpMaster | Description: NBR gasket, for petrochemical liquids, Colour: blue grey, Immersion depth mm: 95
Brand: Bürkle GmbHAvailable in 3 variantsThe manual pressure pump is ideally suited for drawing off, decanting and emptying canisters and barrels. The hand pump is used to create excess pressure that forces the liquid out of the container. The stopcock also allows extraction of small quantities of liquid. The PumpMaster container pump is mounted on the container using a flexible stopper with a variable and adjustable diameter. No special thread adapters are required. PumpMaster fits all commercial container openings with a diameter from 46.5 mm to 60 mm. The immersion tube has a length of 95 cm and it can be shortened depending on the size of the container.Scope of supply: Drum pump, three bungs in different sizes
€178,65
Drum pumps GLP 25 | Description: Pump set, Length mm: 1000
Drum pumps GLP 25 | Description: Pump set, Length mm: 1000
Brand: Grün-Pumpen GmbHAvailable in 3 variantsGLP 25 is your ideal helper for clean and safe liquid transfer from small containers and drums up to 220 litres. Various media such as acids and bases low concentrated, dies, emulsions, dispersions and low-viscosity liquids can be measured out without any problems. Wetted materials are PP, stainless steel and Viton®. The pump is therefore additionally media resistant against aggressive liquids. Driveshaft made from stainless steel. Delivery rates from 1 to 20 l/min adjustable. Pump Set supplied with: motor, pump unit, PP, ¾" dia. inlet tubing (length 500, 700 or 1000mm), PP discharge tubing, 250mm long and adapter for drum necks of 40 to 58mm.
€303,00
Drum pumps, mains-powered | Type: Pump set Solvents, Material: stainless steel, Immersion depth mm: 1200
Drum pumps, mains-powered | Type: Pump set Solvents, Material: stainless steel, Immersion depth mm: 1200
Brand: Lutz Pumpen GmbHAvailable in 12 variantsFor safe handling of environmentally hazardous and aggressive liquids as well as inflammable and explosive fluids.Drum pumps supplied with: 230V motor, 5m cable and plug, pump tube and tubing connection. Explosion-proof version additionally supplied with earthing strap.Pump set "alkalis"For low-viscosity alkali solutions such as sodium chloride, Potassium hydrate, ammonia, formic acid and acetic acid.Supplied with: Pump, 2.0m PVC tubing (DN19 fitting), PP nozzle and barrel adapterPump set "acids"For low-viscosity acids such as hydrochloric, phosphoric, chromic, citric acids and battery acid.Supplied with: Pump, 2.0m PVC tubing (DN19 fitting), PP nozzle and barrel adapterPump set "mineral oils"For low-viscosity mineral oil products such as Diesel, fuel, hydraulic, machinery and motor oils.Supplied with: Pump, 2.0m PVC tubing (DN25 fitting), aluminium nozzle and PP barrel adapterPump set "solvents"For easily flammable hydrocarbons such as ethanol, gasoline, butanol, isopropanol, kerosene, methanol and petroleum.Supplied with: Pump, 2.0m solvent-resistant tubing (DN19 fitting), brass conductive tubing coupling and nozzle, earthing strap and PP barrel adapter
€2.381,00
Drum pumps, mains-powered | Type: Pump, Immersion tube diam. mm: 32, Immersion depth mm: 500
Drum pumps, mains-powered | Type: Pump, Immersion tube diam. mm: 32, Immersion depth mm: 500
Brand: Lutz Pumpen GmbHAvailable in 14 variantsLightweight and powerful pump for transferring small amounts of aqueous liquids up to 300 mPas from cans and drums with infinitely variable speed controller.Motor 230 V, 200 W (IP 24)Seal less pump tubeSuitable accessory flow meter requiredPump with tubing connectionTwo options:Polypropylene version for acids and alkalisStainless steel version for low-viscosity lubricantsAvailable as a set (9.880 310-9.880 315) with 1.5 m PVC tubing, nozzle in polypropylene, wall bracket.Set accessories: Lutz nozzle, 1.5 m PVC hose 3/4", hose connection, hose clamps, wall bracket (for pump B2 Vario PP-SL Ø 32 mm).
€477,90
Flow Indicator with ball, SAN | Connection diam. outside : 6,5-10, Material : SAN, Dimensions mm : 102 x 14 x 57
Flow Indicator with ball, SAN | Connection diam. outside : 6,5-10, Material : SAN, Dimensions mm : 102 x 14 x 57
Brand: Kartell S.p.A.For liquid flow from 50 ml/min in horizontal position, and 140 ml/min in vertical position. Minimum air flow 3 l/min horizontal and 8 l/min vertical. Speed of rotation of ball proportional to flow. Not to be used with corrosive fluids or over +50 °C.
€33,88
Flow Indicator with paddle wheel, SAN | Connection diam. outside : 6-11, Material : SAN, Dimensions mm : 90 x 15 x 40
Flow Indicator with paddle wheel, SAN | Connection diam. outside : 6-11, Material : SAN, Dimensions mm : 90 x 15 x 40
Brand: Kartell S.p.A.For liquid flows down to 5 ml/sec. Wheel spins freely and speed of rotation is proportional to flow rate. Maximum recommended flow rate up to 95 ml/sec, max 2 bar pressure. Not to be used with corrosive fluids or over +85 °C. Can be used with gases.
€50,32
Flow meter TR3 | Connection : G 1 1/4, Material : PVDF
Flow meter TR3 | Connection : G 1 1/4, Material : PVDF
Brand: Lutz Pumpen GmbHAvailable in 3 variantsCan be combined with all drum and container pumps. For thin-bodied fluids.Measurement according to the turbine wheel principleFree-rotatable after assemblyVariable display alignmentLarge illuminated displaySimultaneous display of subset (4-digit) and total quantity (7-digit)Display of the partial and total volumeCustomary 1.5 V batteries (AAA)
€582,30
Foot pumps OTAL®, battery-pumps | Ø: 12 mm, Immersion depth mm: 700, Flow rate l / min.: 5
Foot pumps OTAL®, battery-pumps | Ø: 12 mm, Immersion depth mm: 700, Flow rate l / min.: 5
Brand: Bürkle GmbHWith delivery tubes made of PP/PVCFor safe filling of car batteries with acid or distilled waterWith tube shutoff valveWith dosing tip for precise filling
€115,95
Foot pumps OTAL®, PP | Ø: 22 mm, Immersion depth mm: 900, Flow rate l / min.: 30
Foot pumps OTAL®, PP | Ø: 22 mm, Immersion depth mm: 900, Flow rate l / min.: 30
Brand: Bürkle GmbHAvailable in 4 variantsDelivery tubes made of PPUniversal bungs made of soft PVC, for container openings of 30 – 70 mmFor weak acids, alkalis and detergents
€115,95
Foot pumps OTAL®, PP, with tube and stopcock | Ø: 12 mm, Immersion depth mm: 700, Flow rate l / min.: 12
Foot pumps OTAL®, PP, with tube and stopcock | Ø: 12 mm, Immersion depth mm: 700, Flow rate l / min.: 12
Brand: Bürkle GmbHDelivery tubes made of PPUniversal bungs made of soft PVC, for container openings of 30 – 70 mm1.5 m discharge tube, PVCStopcock made of PP/PE (Ø 10 mm)
€105,00
Foot pumps OTAL®, PVDF | Ø: 16 mm, Immersion depth mm: 700, Flow rate l / min.: 20
Foot pumps OTAL®, PVDF | Ø: 16 mm, Immersion depth mm: 700, Flow rate l / min.: 20
Brand: Bürkle GmbHDelivery tubes made of PVDFUniversal bungs made of soft PVC, for container openings of 30 – 70 mmFor acids, alkalis and chlorine bleaching, not for heavily oxidising acids and alkalis
€160,20
Foot pumps OTAL®, stainless steel | Ø: 18 mm, Immersion depth mm: 900, Flow rate l / min.: 26
Foot pumps OTAL®, stainless steel | Ø: 18 mm, Immersion depth mm: 900, Flow rate l / min.: 26
Brand: Bürkle GmbHDelivery tubes made of stainless steelUniversal bungs made of soft PVC, for container openings of 30 – 70 mmFor liquids that are not easily flammable in Hazard Category AIII (VbF)
€160,20
123456

Copyright © 2024 - Achrom nv - BE 0445.025.508    |    General terms    |    Cookiebeleid    |    Privacybeleid    |    Handcrafted by CrayonCru®

Our website uses cookies.
Both we and our third-party partners use cookies. Some are strictly necessary for the site to function, but there are also optional cookies.

Necessary and functional cookies are always on. If you click "accept all cookies", you also accept the optional cookies. You can choose which cookies you want to enable via "set preferences".

Our website uses cookies.
What are cookies? What cookies do we use and why? Read more in our cookie policy

Necessary cookies

Cookies that are indispensable for your visit to the Website and the correct use thereof

Functional cookies

Cookies that make it easier and more pleasant for you to visit the Website, for example by personalising your browsing experience.

Performance cookies

Cookies that collect information about your use of the Website in order to improve the content of the Website and adapt it to the wishes of the User.

Third-party cookies

Cookies placed by third parties who offer their own services via the Website, such as social media, advertisements or video services.