Please wait

Your message is being sent

An error occurred

Flat ground flange reaction vessels, unjacketed | Capacity ml: 2000, DN mm: 150, Form: A
Flat ground flange reaction vessels, unjacketed | Capacity ml: 2000, DN mm: 150, Form: A
Brand: H W S Hans W. SchmidtFlange in accordance with DIN 12214. Basic flask, without fittings.Form:A = cylindrical formB = short form
€311,00
Flex tubing, PFA | Int. Ø: 2.0 mm, Ext. Ø: 4.0 mm, Wall thickness: 1.00 mm
Flex tubing, PFA | Int. Ø: 2.0 mm, Ext. Ø: 4.0 mm, Wall thickness: 1.00 mm
Brand: Bohlender GmbHAvailable in 21 variantsCorrugated tubing with circular corrugations around the longitudinal axis and cylindrical tubing ends with a length of 40mm which can for example be connected directly to fittings, stopcocks or hose connectors. Together with BOLA Laboratory Screw Joints, the connection is tight and suitable for vacuum.Highly flexibleTight bending radius only causes little cross-section reductionNon-porousTransparentIdeal for connections under vibrationsUsable with a small bending radiusFor compensation of thermal expansionsFor easy handling of liquids
€64,65
Flexible clutch | Type: FK 1
Flexible clutch | Type: FK 1
Brand: Buddeberg GmbHRequired for stirring tasks using glass stirring rods. The flexible coupling compensates for any structural variances.
€146,00
Flexible connecting system for DURAN® GL 45 flasks | Description: Scew cap GL 45, 2 ports x GL 14
Flexible connecting system for DURAN® GL 45 flasks | Description: Scew cap GL 45, 2 ports x GL 14
Brand: DWK Life Sciences GmbH (Duran)Available in 13 variantsFor safe transfer of liquid media within a closed and sterile system (evaporation is reduced).Screw closure GL 45 with two, three or four ports GL 14 threadAutoclavableTemperature restistant up to max. 140 °CFlexible modular systemSterile pressure equalisation is possible through use of a membrane filterUnused ports can be provided with a blind cap
€31,16
Flexible Distributors, PP | For tubing bore mm: 6 - 9, number of nozzles: 3
Flexible Distributors, PP | For tubing bore mm: 6 - 9, number of nozzles: 3
Brand: Bohlender GmbHAvailable in 3 variantsFor connecting elastic tubing by simply slipping it onto hose connectors. Suitable for GL45 threaded bottles. With screw cap made of glass-fibre reinforced PP, ideal for transferring liquids or gases. The angled tubing connectors can be attached to a liquid source, a pressure source or a vacuum system. Avoid crimping of the tubing. The distributor can be loosened by simply turning the screw cap. The complete distribution system can then be fixed onto another bottle.
€52,02
Flexible light guide for SCHOTT Cold light sources | Description: 2-branch, M-PVC coated, diam. 4.5 mm, L 1600 mm, For: KL 1500 HAL, KL 1600 LED, KL 2500 LED
Flexible light guide for SCHOTT Cold light sources | Description: 2-branch, M-PVC coated, diam. 4.5 mm, L 1600 mm, For: KL 1500 HAL, KL 1600 LED, KL 2500 LED
Brand: Schott AGAvailable in 9 variants
€380,00
Flexible light guide for SCHOTT Cold light sources | Description: Annular, "slim", int. diam. 66 mm, For: KL 1500 HAL, KL 1600 LED, KL 2500 LED
Flexible light guide for SCHOTT Cold light sources | Description: Annular, "slim", int. diam. 66 mm, For: KL 1500 HAL, KL 1600 LED, KL 2500 LED
Brand: Schott AGAvailable in 4 variantsFor intensive, uniform and shadow-free illumination of samples.
€630,00
Floating Centrifuge Tube Racks, PP | For tubes ml: 1.5 ... 2.0, Colour: White, Dimensions (W x D x H) mm: 77 x 269 x 43
Floating Centrifuge Tube Racks, PP | For tubes ml: 1.5 ... 2.0, Colour: White, Dimensions (W x D x H) mm: 77 x 269 x 43
Brand: Bel-Art ProductsAvailable in 2 variantsOpen style floating rack provides tubes with maximum contact with the water and better circulation of the water bath around the tubes, allowing superior temperature control of samples. Tubes are held tightly in rack and can be removed easily.End handles allow easy transportStackableSteam autoclavable at 121 °C
€58,25
Floating cryovial racks Nalgene™, Type 5974, PP | Type: 5974, Description: Square, For tubes ml: 1.0/1.2/1.5/2.0
Floating cryovial racks Nalgene™, Type 5974, PP | Type: 5974, Description: Square, For tubes ml: 1.0/1.2/1.5/2.0
Brand: Thermo Elect.LED GmbH (Nalge)Available in 3 variantsFor 05 to 2.0ml test tubes and cryovials. Racks will float with a full load of filled tubes. With moulded identification numbers and letters.
€9,06
Floating pellets, PP | Description: Floating pellets
Floating pellets, PP | Description: Floating pellets
Brand: IKA-Werke GmbH & Co.KGDiameter 20 mm. Pellets with 20 mm diameter. Can cover 0.166 m². Only suitable for use with water. Temperature stable up to +100 °C.
€146,00
Floating racks for Temperature control systems ICC | Array: 8, For tubes ml: 15
Floating racks for Temperature control systems ICC | Array: 8, For tubes ml: 15
Brand: IKA-Werke GmbH & Co.KGAvailable in 3 variants
€44,50

Our website uses cookies.
Both we and our third-party partners use cookies. Some are strictly necessary for the site to function, but there are also optional cookies.

Necessary and functional cookies are always on. If you click "accept all cookies", you also accept the optional cookies. You can choose which cookies you want to enable via "set preferences".

Our website uses cookies.
What are cookies? What cookies do we use and why? Read more in our cookie policy

Necessary cookies

Cookies that are indispensable for your visit to the Website and the correct use thereof

Functional cookies

Cookies that make it easier and more pleasant for you to visit the Website, for example by personalising your browsing experience.

Performance cookies

Cookies that collect information about your use of the Website in order to improve the content of the Website and adapt it to the wishes of the User.

Third-party cookies

Cookies placed by third parties who offer their own services via the Website, such as social media, advertisements or video services.