Please wait

Your message is being sent

An error occurred

Analytical measurement and testing

Chromatography

Cleaning and sterilisation

Cleanroom

Distillation, separation, filtration

Environmental-, soil-, water-, food analysis

General laboratory consumables

Heating and cooling technology

Life sciences

Liquid handling

Occupational safety, security

Optical instruments and microscopes

Sample preparation

Stirring, shaking, mixing

Vacuum technology, drying, dry storage

335336337338339340
Fiber glass telescopic pole INGENIOUS | Length m: 1.50 - 6.00
Fiber glass telescopic pole INGENIOUS | Length m: 1.50 - 6.00
Brand: Windaus-LabortechnikAvailable in 4 variantsVery robust telescopic pole, ideal for sample taking. Fiber glass makes it almost indestructible and non-corrosive. Comfortable to carry even at low temperatures. Simple extension and adjustment mechanism. You can change the length easily by a quarter rotation. (Pic. 3). At telescope poles of 3,85 to 6 meter the length could be easily changed by using the clamp (Pic. 2). Comfortable use of spring mechanism. This type can take all samplers and catchers with universal connecting part.
€126,00
Fiber optical ring lights SRL3 / SRL6 | Type: SRL3
Fiber optical ring lights SRL3 / SRL6 | Type: SRL3
Brand: Starlight Opto-ElectronicsAvailable in 2 variantsBlack. The fiber optical ring lights offer high flexibility and luminous efficiency.Very good transmissionLow heat generationFor halogen and LED cold light sourcesAdaptable to cold light sources from all manufacturers
€539,00
Fibre Filters with inorganic binder | Type: GF 6, Ø mm: 47, Weight g / m²: 80
Fibre Filters with inorganic binder | Type: GF 6, Ø mm: 47, Weight g / m²: 80
Brand: Hahnemühle FineArt GmbHAvailable in 11 variantsRecommended filters for environmental analysis and controlling both air and water pollution.Made of 100 % borosilicate glass fibres with bindersGlass fibre filters capture fine particles down to 1 µm from liquids, in air, gases and aerosols with even 0.3 to 0.5 µm being absorbedExtremely low content in alkali-earth metalsChemical stability: It keeps all its properties in contact with acid solutions (except hydrofluoric acid) and basic solutions at moderate concentrationsStabile at temperatures up to 500 °CGravimetrical analysis of organic and inorganic impurities in water and waste water according to DIN 38409 and EN 872 (suspended particles)Measurement of immission, measurement of dust in air and gases, monitoring of the efficiency of filtration and dedusting, monitoring the combustion air of power plants and of the steel and iron industryMeasurement of dust release in workplace and production processes and the purification of compartment airMeasurement of scintillation
€41,10
Filament Dry cabinet for 3D-Printing | Type: Filament Dry Cabinet
Filament Dry cabinet for 3D-Printing | Type: Filament Dry Cabinet
Brand: Taiwan Dry Tech Corp.The Dry cabinet provides low humidity environment and is suitable for storing various types of filament material. 4 filament feed ports supporting up to 3 mm filaments allows direct printing of dry filament from the cabinet while in humidity controlled storage. Adjustable hanging rod will allow hanging of dry filament spools up to 330 mm in diameter. Air tight cabinet will prevent moisture and dust from contaminating your printed project. Low energy consumption. Convenient design with no consumable parts nor desiccants to replace, no water tanks to empty. Powerful molecular sieve desiccants keeps filament dry without heat to maintain tensile strength.<20 % RH low humidity storage4 filament feed ports for direct printingDries without heat: Maintains tensile strengthDigital hygrometer for active monitoringFast 2 hour recoveryFully adjustable spool hanger
€591,00
Filling and dosing station, steel | Capacity: 2 x 60 l or 2 x 200 l barrels, Dimensions (W x D x H) mm: 835 x 1240 x 1580, Load kg: 500
Filling and dosing station, steel | Capacity: 2 x 60 l or 2 x 200 l barrels, Dimensions (W x D x H) mm: 835 x 1240 x 1580, Load kg: 500
Brand: asecos GmbHIdeal for acids and alkalis.Build-up shelves transportable with forkliftSafe filling through protruding drum sumpDrum sump can be pulled out even when filledCollectable volume: 205 liters
€856,00
Filling and Venting Closures Nalgene™ with 3 ports, Type 2162, PP | Type: 2162, Dimensions (dia. x H) mm: 102 x 98, For tubing bore mm: 12,7
Filling and Venting Closures Nalgene™ with 3 ports, Type 2162, PP | Type: 2162, Dimensions (dia. x H) mm: 102 x 98, For tubing bore mm: 12,7
Brand: Thermo Elect.LED GmbH (Nalge)Available in 6 variantsWith TPE gasket and port caps, Nalgene 50 platinum-cured silicone tubing. All plastic screw closures for sterile liquid transfer of tissue media, biological reagents, pure water and chemicals to and from Nalgene-carboys. For applications such as bio-reactors and fermenters. Suitable for all large Nalgene carboys or bottles with screw closures of 53mm (53B) or 83mm (83B). Includes two Nalgene 550 platinum-cured silicone tubing for drop tube and splash guard. Can be used with Nalgene carboy bottles with properly set up peristaltic pumps. Autoclavable.
€43,50
Filling tubes, PP, for seripettor® | Description: For seripettor®, Length: 500 mm
Filling tubes, PP, for seripettor® | Description: For seripettor®, Length: 500 mm
Brand: BRAND GMBH + CO.KGAvailable in 4 variants
€9,10
Filter aids | Description: Clippings, Capacity: 500 g
Filter aids | Description: Clippings, Capacity: 500 g
Brand: Cytiva Europe GmbHCellulose materials used to coagulate precipitates and as a prefilter layer in funnels. Quantitative grade is used for filter aids except for ordinary clippings. Ashless.
€91,61
Filter bag FILTRA-BAG
Filter bag FILTRA-BAG
Brand: Labplas IncThe filtra bag is a blender bag designed t facilitate aliquot sampling. The filter membrane allows bacteria to circulate between compartments while keeping larger amonts of residue separate. It´s ideal solution for samples that have to be free of solid particles for microbiological analysis.Full-size filter membrane for optimal filtrationPE terephthalate outer membrane for added strengthIntegrated secure closure system with 1 round wire and 1 flat wire
€112,70
Filter bag FILTRA-BAG
Filter bag FILTRA-BAG
Brand: Labplas IncThe filtra bag is a blender bag designed t facilitate aliquot sampling. The filter membrane allows bacteria to circulate between compartments while keeping larger amonts of residue separate. It´s ideal solution for samples that have to be free of solid particles for microbiological analysis.Full-size filter membrane for optimal filtrationPE terephthalate outer membrane for added strength
€71,53
Filter bags Whirl-Pak®, PE, sterile | Nominal capacity ml: 1627, Dimensions (D x W) mm: 190 x 300, Thickness mm: 0,102
Filter bags Whirl-Pak®, PE, sterile | Nominal capacity ml: 1627, Dimensions (D x W) mm: 190 x 300, Thickness mm: 0,102
Brand: Nasco Sampling LLCAvailable in 3 variantsAll the bags use the same filter material. These special bags contain a third layer of finely perforated polyethylene, which filters out the solids in the sample when used in a homogeniser blender. This allows for easy pipetting of the sample. The hole diameter in the filter layer measures 0.33 mm and there are 285 holes per square cm. The filter is sealed into the perimeter of the bag on the sides and bottom, allowing the sample to be placed in the bag on either side. The liquid will transfer through the filter, but the solids stay on one side. With write-on lable. Temperature range: -210 to 82 °C.
€449,00
Filter bags Whirl-Pak®, PE, sterile | Nominal capacity: 1627 ml, Dimensions (WxH): 190 x 300 mm, Thickness: 0.102 mm
Filter bags Whirl-Pak®, PE, sterile | Nominal capacity: 1627 ml, Dimensions (WxH): 190 x 300 mm, Thickness: 0.102 mm
Brand: Nasco Sampling LLCAll the bags use the same filter material. These special bags contain a third layer of finely perforated polyethylene, which filters out the solids in the sample when used in a homogeniser blender. This allows for easy pipetting of the sample. The hole diameter in the filter layer measures 0.33 mm and there are 285 holes per square cm. The filter is sealed into the perimeter of the bag on the sides and bottom, allowing the sample to be placed in the bag on either side. The liquid will transfer through the filter, but the solids stay on one side. With write-on lable. Temperature range: -210 to 82 °C.
€345,00
335336337338339340

Copyright © 2026 - Achrom nv - BE 0445.025.508    |    General terms    |    Cookiebeleid    |    Privacybeleid    |    Handcrafted by CrayonCru®

Our website uses cookies.
Both we and our third-party partners use cookies. Some are strictly necessary for the site to function, but there are also optional cookies.

Necessary and functional cookies are always on. If you click "accept all cookies", you also accept the optional cookies. You can choose which cookies you want to enable via "set preferences".

Our website uses cookies.
What are cookies? What cookies do we use and why? Read more in our cookie policy

Necessary cookies

Cookies that are indispensable for your visit to the Website and the correct use thereof

Functional cookies

Cookies that make it easier and more pleasant for you to visit the Website, for example by personalising your browsing experience.

Performance cookies

Cookies that collect information about your use of the Website in order to improve the content of the Website and adapt it to the wishes of the User.

Third-party cookies

Cookies placed by third parties who offer their own services via the Website, such as social media, advertisements or video services.