Please wait

Your message is being sent

An error occurred

Extraction heating mantles HM-200-MP | Type: HM-200-MP3, Zones: 3, Vessels capacity: 250 ml
Extraction heating mantles HM-200-MP | Type: HM-200-MP3, Zones: 3, Vessels capacity: 250 ml
Brand: Cole-Parmer Ltd. (Electro)Available in 8 variants
€1.330,93
Extraction heating mantles with stirring function SHM-200-MP | Type: SHM-200-MP3, Zones: 3, Vessels capacity: 250 ml
Extraction heating mantles with stirring function SHM-200-MP | Type: SHM-200-MP3, Zones: 3, Vessels capacity: 250 ml
Brand: Cole-Parmer Ltd. (Electro)Available in 8 variantsAllow the solution to be stirred and heated simultaneouslyProvide stirring speeds of between 50 to 1000 rpmOne stirring control operates each set of three recesses
€2.260,31
Extraction kits Copure® QuEChERS | Type: Mix D, Volume ml: 15, Composition: 0.15 g PSA, 0.015 g GCB, 0.9 g MgSO4
Extraction kits Copure® QuEChERS | Type: Mix D, Volume ml: 15, Composition: 0.15 g PSA, 0.015 g GCB, 0.9 g MgSO4
Brand: Biocomma LimitedAvailable in 6 variantsExtraction and clean-up mixtures for sample preparation in the pesticide analysis of vegetable foodstuffs according to EN 15662 using GC/MS or LC/MS after acetonitrile extraction and purification using the dispersive SPE-QuEChERS method.The samples are first extracted with Mix A. Purification is done with one of the following mixtures:Mix B (Clean-up mixture for fruits and vegetables with low fat content, e.g. apples, strawberries)Mix C (Clean-up mixture for fruits and vegetables with high fat content, containing oil/wax, e.g. avocados)Mix D (Clean-up mixture for moderately chlorophyll/carotenoid-containing fruits and vegetables, e.g. carrots, salad)Mix E (Clean-up mixture for fruits and vegetables with high chlorophyll/carotenoid content, e.g. sweet peppers, spinach)If required, add ceramic homogenising beads for better mixing.Mix A contains a bag with the required amount of mixture and a 50 ml empty tubeMix B, C, D and E are pre-weighed into a 15 ml tube
€109,00
Extraction thimbles MN 645 D, MN 645 W, MN 645 F pure cellulose | Type : 645 W, Description : More permeable than MN 645, Int. diam. mm : 28
Extraction thimbles MN 645 D, MN 645 W, MN 645 F pure cellulose | Type : 645 W, Description : More permeable than MN 645, Int. diam. mm : 28
Brand: Macherey-Nagel GmbH & Co. KGAvailable in 8 variantsExtraction thimbles are used for holding solid materials, from which certain substances are to be extracted with a suitable solvent. Additionally, extraction thimbles are used in the fields of air and waste gas analysis for collecting solid particles.
€92,00
Extraction thimbles MN 645 R, pure cellulose | Int. diam. mm : 79, Length mm : 155
Extraction thimbles MN 645 R, pure cellulose | Int. diam. mm : 79, Length mm : 155
Brand: Macherey-Nagel GmbH & Co. KGExtraction thimbles are used for holding solid materials, from which certain substances are to be extracted with a suitable solvent. With sealing collar and two finger recesses on opposite sides of the collar, for dust analysis in industrial gases, exhaust gases and room air.
€400,00
Extraction thimbles MN 645, pure cellulose | Int. diam. mm : 27, Length mm : 80
Extraction thimbles MN 645, pure cellulose | Int. diam. mm : 27, Length mm : 80
Brand: Macherey-Nagel GmbH & Co. KGAvailable in 46 variantsFat determination in food and feedDetermination of binder content in asphaltAnalysis of soil contaminantsDetermination of additives in rubber and elastomers
€92,00
Extraction Thimbles MN 649, micro glass fibre | Type: MN 649, Int. Ø: 27 mm, Wall thickness: 1,5 mm
Extraction Thimbles MN 649, micro glass fibre | Type: MN 649, Int. Ø: 27 mm, Wall thickness: 1,5 mm
Brand: Macherey-Nagel GmbH & Co. KGAvailable in 20 variantsPollution monitoring, air samplingHigh temperature filtration (up to +500 °C)For solvents incompatible with cellulose thimbles (for example strong acids or bases)
€172,00
Extraction thimbles, Borosilicate glass | Ø mm : 25, Length mm : 100
Extraction thimbles, Borosilicate glass | Ø mm : 25, Length mm : 100
Brand: Hahnemühle FineArt GmbHAvailable in 7 variantsRecommended for Soxhlet extraction with solvents, which are incompatible with cellulose fibres and for filtration of air and gas streams.Made of 100 % pure borosilicate fibres, without binding elementsHigh loading capacity and highly permeable to airThickness is 1.5 mm (diameter < 33 mm)High retention of small particles, > 99 % according to BS 4400Good stability at high temperatures up to 500 °CRecommended for hot, moist, and acidic gasesGravimetric determination of particles in hot gasesFurther sizes on request.
€170,50
Extraction Thimbles, cellulose | Int. diam. mm : 22, Length mm : 100
Extraction Thimbles, cellulose | Int. diam. mm : 22, Length mm : 100
Brand: Hahnemühle FineArt GmbHAvailable in 26 variantsFor reliable and fast analysis in the areas of food control and environmental monitoring. Suitable for Soxhlet-type, Tecator-type or similar devices, to extract certain components out of solid material with an appropriate solvent.Made of pure cellulose that is totally free from binding elementsHigh purity of selected cellulose guarantees reliable and replicable resultsThe consistent high porosity ensures fast flow throughHigh fitting accuracy for all available extraction systemsWall thickness 1.3 mm at thimbles with ≤35 mm inner diameter, 1.7 mm at thimbles with >35 mm inner diameterFor two systemsGrade 900: Soxhlet Extraction, Grade 901: Tecator Extraction
€93,10
Extraction thimbles, Cellulose | Int. diam. mm : 28, Length mm : 120, Wall thickness mm : 1.0
Extraction thimbles, Cellulose | Int. diam. mm : 28, Length mm : 120, Wall thickness mm : 1.0
Brand: Cytiva Europe GmbHAvailable in 22 variantsSupplied in packs of 25. Dimensions given are nominal internal diameter x external length in mm.
€109,84
Extraction Thimbles, Grade 603 G, glass fibre | Ø mm: 16, Length mm: 50, Thickness mm: 1.0
Extraction Thimbles, Grade 603 G, glass fibre | Ø mm: 16, Length mm: 50, Thickness mm: 1.0
Brand: Cytiva Europe GmbHAvailable in 11 variantsResistant to temperatures up to +500 °CAnalysis of hot and acidic gases, including emission control and smoke stack gas monitoringSoxhlet extractionAnalysis of pesticide residuesDetermination of oil/fat content of foodsAnalysis of oil and grease in solid wastes
€188,00
Extraction tubes Mojonnier, Borosilicate glass 3.3 | Description : Standard DIN 10280, round bulb, with spout, incl. cork stopper Cat. No. 6.264 751
Extraction tubes Mojonnier, Borosilicate glass 3.3 | Description : Standard DIN 10280, round bulb, with spout, incl. cork stopper Cat. No. 6.264 751
Brand: Gerber Instruments AGAvailable in 7 variants
€47,70

Our website uses cookies.
Both we and our third-party partners use cookies. Some are strictly necessary for the site to function, but there are also optional cookies.

Necessary and functional cookies are always on. If you click "accept all cookies", you also accept the optional cookies. You can choose which cookies you want to enable via "set preferences".

Our website uses cookies.
What are cookies? What cookies do we use and why? Read more in our cookie policy

Necessary cookies

Cookies that are indispensable for your visit to the Website and the correct use thereof

Functional cookies

Cookies that make it easier and more pleasant for you to visit the Website, for example by personalising your browsing experience.

Performance cookies

Cookies that collect information about your use of the Website in order to improve the content of the Website and adapt it to the wishes of the User.

Third-party cookies

Cookies placed by third parties who offer their own services via the Website, such as social media, advertisements or video services.