Please wait

Your message is being sent

An error occurred

Analytical measurement and testing

Chromatography

Cleaning and sterilisation

Cleanroom

Distillation, separation, filtration

Environmental-, soil-, water-, food analysis

General laboratory consumables

Heating and cooling technology

Life sciences

Liquid handling

Occupational safety, security

Optical instruments and microscopes

Sample preparation

Stirring, shaking, mixing

Vacuum technology, drying, dry storage

Bel-Art Products
303132333435
Cloning cylinder, PS, sterile | Type: Assorted Cloning Cylinders: 4.7 mm I.D. x 8 mm H, 6.4 mm I.D. x 8 mm H and 9.5 mm I.D. x 11 mm H, 40 of each size
Cloning cylinder, PS, sterile | Type: Assorted Cloning Cylinders: 4.7 mm I.D. x 8 mm H, 6.4 mm I.D. x 8 mm H and 9.5 mm I.D. x 11 mm H, 40 of each size
Brand: Bel-Art ProductsAvailable in 4 variantsThese cloning cylinders facilitate the isolation of individual cell clones, each generated from a single cell, yielding a homogenous population of cells. To isolate a clone, a thin layer of grease is applied to the bottom edge of the cylinder and then inverted over the clone of choice. After adding a small volume of Trypsin or EDTA, the dish is incubated at 37 ºC (98.6 ºF) briefly until cells detach. Cells are then collected from inside the cylinder and transferred to another vessel for further growth.Cylinders are tapered so bottom edge is wider than the top ensuring a good sealing surfacePolystyrene cloning cylinders are supplied in sterile packsThree sizes: 4.7 mm I.D. x 8 mm H, 6.4 mm I.D. x 8 mm H and 9.5 mm I.D. x 11 mm HPacked 10 per bag, one size
€274,77
Cloning cylinder, PS, sterile | Type: Cloning Cylinders: 4.7 mm I.D. x 8 mm H
Cloning cylinder, PS, sterile | Type: Cloning Cylinders: 4.7 mm I.D. x 8 mm H
Brand: Bel-Art ProductsAvailable in 4 variantsThese cloning cylinders facilitate the isolation of individual cell clones, each generated from a single cell, yielding a homogenous population of cells. To isolate a clone, a thin layer of grease is applied to the bottom edge of the cylinder and then inverted over the clone of choice. After adding a small volume of Trypsin or EDTA, the dish is incubated at 37 ºC (98.6 ºF) briefly until cells detach. Cells are then collected from inside the cylinder and transferred to another vessel for further growth.Cylinders are tapered so bottom edge is wider than the top ensuring a good sealing surfacePolystyrene cloning cylinders are supplied in sterile packsThree sizes: 4.7 mm I.D. x 8 mm H, 6.4 mm I.D. x 8 mm H and 9.5 mm I.D. x 11 mm HPacked 10 per bag, one size
€135,15
Cloning cylinder, PS, sterile | Type: Cloning Cylinders: 6.4 mm I.D. x 8 mm H
Cloning cylinder, PS, sterile | Type: Cloning Cylinders: 6.4 mm I.D. x 8 mm H
Brand: Bel-Art ProductsAvailable in 4 variantsThese cloning cylinders facilitate the isolation of individual cell clones, each generated from a single cell, yielding a homogenous population of cells. To isolate a clone, a thin layer of grease is applied to the bottom edge of the cylinder and then inverted over the clone of choice. After adding a small volume of Trypsin or EDTA, the dish is incubated at 37 ºC (98.6 ºF) briefly until cells detach. Cells are then collected from inside the cylinder and transferred to another vessel for further growth.Cylinders are tapered so bottom edge is wider than the top ensuring a good sealing surfacePolystyrene cloning cylinders are supplied in sterile packsThree sizes: 4.7 mm I.D. x 8 mm H, 6.4 mm I.D. x 8 mm H and 9.5 mm I.D. x 11 mm HPacked 10 per bag, one size
€143,59
Cloning cylinder, PS, sterile | Type: Cloning Cylinders: 9.5 mm I.D. x 11 mm H
Cloning cylinder, PS, sterile | Type: Cloning Cylinders: 9.5 mm I.D. x 11 mm H
Brand: Bel-Art ProductsAvailable in 4 variantsThese cloning cylinders facilitate the isolation of individual cell clones, each generated from a single cell, yielding a homogenous population of cells. To isolate a clone, a thin layer of grease is applied to the bottom edge of the cylinder and then inverted over the clone of choice. After adding a small volume of Trypsin or EDTA, the dish is incubated at 37 ºC (98.6 ºF) briefly until cells detach. Cells are then collected from inside the cylinder and transferred to another vessel for further growth.Cylinders are tapered so bottom edge is wider than the top ensuring a good sealing surfacePolystyrene cloning cylinders are supplied in sterile packsThree sizes: 4.7 mm I.D. x 8 mm H, 6.4 mm I.D. x 8 mm H and 9.5 mm I.D. x 11 mm HPacked 10 per bag, one size
€185,78
Cryo-Safe™ Coolers | For tubes ml: 0.5 ml, 1.5 ml, 2.0 ml, Dimensions (L x W x H) mm: 145 x 100 x 95, Array: 12
Cryo-Safe™ Coolers | For tubes ml: 0.5 ml, 1.5 ml, 2.0 ml, Dimensions (L x W x H) mm: 145 x 100 x 95, Array: 12
Brand: Bel-Art ProductsAvailable in 5 variantsUse to protect samples on the bench, during transport, or in freezers with defrost cycle and fluctuating temperaturesPolycarbonate. A non-toxic freezing gel is isolated within the walls of the cooler, guaranteeing that labels or marks on the vials or tube are not damaged.The indexed and transparent (9.401 090, 9.401 091, 9.401 092) or gel-filled (9.401 093, 9.401 094) polycarbonate lid shows tube location and matches locations printed on the coolerSide handles ( 9.401 090, 9.401 091) or a wire handle for easy carryingCoolers can be stacked to save space and maximize freezer volumeRubber feet to prevent slippingAll polycarbonate cooler body easy to clean
€261,34
Cryo-Safe™ Coolers | For tubes ml: 0.5 ml, 1.5 ml, 2.0 ml, Dimensions (L x W x H) mm: 243 x 157 x 146, Array: 32
Cryo-Safe™ Coolers | For tubes ml: 0.5 ml, 1.5 ml, 2.0 ml, Dimensions (L x W x H) mm: 243 x 157 x 146, Array: 32
Brand: Bel-Art ProductsAvailable in 5 variantsUse to protect samples on the bench, during transport, or in freezers with defrost cycle and fluctuating temperaturesPolycarbonate. A non-toxic freezing gel is isolated within the walls of the cooler, guaranteeing that labels or marks on the vials or tube are not damaged.The indexed and transparent (9.401 090, 9.401 091, 9.401 092) or gel-filled (9.401 093, 9.401 094) polycarbonate lid shows tube location and matches locations printed on the coolerSide handles ( 9.401 090, 9.401 091) or a wire handle for easy carryingCoolers can be stacked to save space and maximize freezer volumeRubber feet to prevent slippingAll polycarbonate cooler body easy to clean
€427,58
Cryo-Safe™ Coolers | For tubes ml: 0.5 ml, 1.5 ml, Dimensions (L x W x H) mm: 145 x 100 x 95, Array: 12
Cryo-Safe™ Coolers | For tubes ml: 0.5 ml, 1.5 ml, Dimensions (L x W x H) mm: 145 x 100 x 95, Array: 12
Brand: Bel-Art ProductsAvailable in 5 variantsUse to protect samples on the bench, during transport, or in freezers with defrost cycle and fluctuating temperaturesPolycarbonate. A non-toxic freezing gel is isolated within the walls of the cooler, guaranteeing that labels or marks on the vials or tube are not damaged.The indexed and transparent (9.401 090, 9.401 091, 9.401 092) or gel-filled (9.401 093, 9.401 094) polycarbonate lid shows tube location and matches locations printed on the coolerSide handles ( 9.401 090, 9.401 091) or a wire handle for easy carryingCoolers can be stacked to save space and maximize freezer volumeRubber feet to prevent slippingAll polycarbonate cooler body easy to clean
€320,53
Cryo-Safe™ Coolers | For tubes ml: 0.5 ml, 1.5 ml, Dimensions (L x W x H) mm: 243 x 157 x 146, Array: 32
Cryo-Safe™ Coolers | For tubes ml: 0.5 ml, 1.5 ml, Dimensions (L x W x H) mm: 243 x 157 x 146, Array: 32
Brand: Bel-Art ProductsAvailable in 5 variantsUse to protect samples on the bench, during transport, or in freezers with defrost cycle and fluctuating temperaturesPolycarbonate. A non-toxic freezing gel is isolated within the walls of the cooler, guaranteeing that labels or marks on the vials or tube are not damaged.The indexed and transparent (9.401 090, 9.401 091, 9.401 092) or gel-filled (9.401 093, 9.401 094) polycarbonate lid shows tube location and matches locations printed on the coolerSide handles ( 9.401 090, 9.401 091) or a wire handle for easy carryingCoolers can be stacked to save space and maximize freezer volumeRubber feet to prevent slippingAll polycarbonate cooler body easy to clean
€494,62
Cryo-Safe™ Coolers | For tubes ml: 15 ml, Dimensions (L x W x H) mm: 197 x 140 x 190, Array: 12
Cryo-Safe™ Coolers | For tubes ml: 15 ml, Dimensions (L x W x H) mm: 197 x 140 x 190, Array: 12
Brand: Bel-Art ProductsAvailable in 5 variantsUse to protect samples on the bench, during transport, or in freezers with defrost cycle and fluctuating temperaturesPolycarbonate. A non-toxic freezing gel is isolated within the walls of the cooler, guaranteeing that labels or marks on the vials or tube are not damaged.The indexed and transparent (9.401 090, 9.401 091, 9.401 092) or gel-filled (9.401 093, 9.401 094) polycarbonate lid shows tube location and matches locations printed on the coolerSide handles ( 9.401 090, 9.401 091) or a wire handle for easy carryingCoolers can be stacked to save space and maximize freezer volumeRubber feet to prevent slippingAll polycarbonate cooler body easy to clean
€350,21
Cryomortar | Ø mm: 165, Height mm: 114, Capacity ml: 405
Cryomortar | Ø mm: 165, Height mm: 114, Capacity ml: 405
Brand: Bel-Art ProductsStainless steel cryovessel with mortar insert in solid PE casing. With rubber suction foot. Mortar insert supplied with removable, insulated handle. Without pestle.
€719,79
Cuvetten rack, PP 10mm, 12 places
Cuvetten rack, PP 10mm, 12 places
€73,58
Density Hydrometer Durac® 0.920-1.080:0.002 300mm, PC, ca.15°C
Density Hydrometer Durac® 0.920-1.080:0.002 300mm, PC, ca.15°C
€233,71
303132333435

Copyright © 2026 - Achrom nv - BE 0445.025.508    |    General terms    |    Cookiebeleid    |    Privacybeleid    |    Handcrafted by CrayonCru®

Our website uses cookies.
Both we and our third-party partners use cookies. Some are strictly necessary for the site to function, but there are also optional cookies.

Necessary and functional cookies are always on. If you click "accept all cookies", you also accept the optional cookies. You can choose which cookies you want to enable via "set preferences".

Our website uses cookies.
What are cookies? What cookies do we use and why? Read more in our cookie policy

Necessary cookies

Cookies that are indispensable for your visit to the Website and the correct use thereof

Functional cookies

Cookies that make it easier and more pleasant for you to visit the Website, for example by personalising your browsing experience.

Performance cookies

Cookies that collect information about your use of the Website in order to improve the content of the Website and adapt it to the wishes of the User.

Third-party cookies

Cookies placed by third parties who offer their own services via the Website, such as social media, advertisements or video services.