Please wait

Your message is being sent

An error occurred

Drum Sumps, polyethylene | Description: with castors, Grid: galvanized, Dimensions (W x D x H) mm: 725 x 525 x 380*
Drum Sumps, polyethylene | Description: with castors, Grid: galvanized, Dimensions (W x D x H) mm: 725 x 525 x 380*
Brand: asecos GmbHAvailable in 9 variantshigh resistance to acids, alkalis, oil and other aggressive hazardous materialsfor the storage of pollutantsavailable with galvanized or polyethylene gridcapacity with grid: 2 drums of 60 litrescapacity without grid: 1 drum of 60 litressump for direct placing onto the ground or on a palletwith feet: for safe transport with fork lift truckwith castors: for safe transport without additional helpLoad capacity: 150kg, version with castors: 120kg
€242,00
Drum Sumps, steel | Description: without feet, galvanized, Grid: galvanized, Dimensions (W x D x H) mm: 635 x 785 x 178
Drum Sumps, steel | Description: without feet, galvanized, Grid: galvanized, Dimensions (W x D x H) mm: 635 x 785 x 178
Brand: asecos GmbHAvailable in 2 variantsIdeal for acids and alkalis.Approved for the storage of water polluting and flammable liquids of all hazard classesMeets the requirements of the Water Resources Act (WHG)Storage directly in the tub or on the gridUsable as a filling station in combination with a drum standCollectable volume: 60 liters
€231,00
Dry Baths, AccuBlock™ | Type: Dual Block
Dry Baths, AccuBlock™ | Type: Dual Block
Brand: Corning BVAvailable in 3 variantsThe device is available in single, dual, and four block configurations and provide a broad temperature range up to 150 °C, which makes them useful for a variety of applications in molecular biology, histology, clinical, environmental, and industrial laboratories.Single, dual and four block capacityDual displayUSB connectivity enables traceability of dataMolded block chamberPlease order blocks separately.
€477,11
Dry Block Heater Matrix Δ+ | Type: Matrix Δ+
Dry Block Heater Matrix Δ+ | Type: Matrix Δ+
Brand: IKA-Werke GmbH & Co.KGPowerful Dry Block Heater for samples with very small volumes, e.g. blood samples, pharmaceutical agents, DNA/RNA samples, DNA/RNA samples or Elisa assays. Wide range of exchangeable attachments for various applications available.Without cross-contaminationLarge and clear display with a convenient menu structure allows for intuitive operationRobust aluminum die cast housingPlease order attachments separately.
€2.309,00
Dry Block Heater | Type: Dry Block Heater 1, Dimensions (W x D x H) mm: 151 x 228 x 73, Dimensions Set-up plate (W x D) mm: 95 x 76
Dry Block Heater | Type: Dry Block Heater 1, Dimensions (W x D x H) mm: 151 x 228 x 73, Dimensions Set-up plate (W x D) mm: 95 x 76
Brand: IKA-Werke GmbH & Co.KGAvailable in 12 variantsDigital block heaters for 1, 2, 3 or 4 aluminium blocks provides precise temperature control in small vessels. Included PT 1000 temperature sensor allows temperature control directly in the sample vessel. It is used with PCR tubes, PCR strips, Greiner tubes, microplates and cuvettes. The block heater is ideal for melting and boiling point determination, enzyme reactions, incubation and activation of cultures, immunoassays, DNA denaturation, culture media tests, coagulation tests, blood-urea-nitrogen determinations and in situ hybridizations.Stepless adjustable temperature up to 120°CTimer: Countdown, adjustable from 1min to 99h 59minCounter: Display of heating timeHighly versatile with a large number of blocksError code displayFixed safety circuitAcoustic signal at end of testWithout blocks. Please order separately.
€1.240,08
Dry Block Heaters, 2 blocks, with lid | Capacity: 2 blocks, Length mm: 391, Width mm: 203
Dry Block Heaters, 2 blocks, with lid | Capacity: 2 blocks, Length mm: 391, Width mm: 203
Brand: Ohaus GmbHThe digital Dry Block Heater with Heated Lid is designed for applications that require repeatable results and superior temperature stability. These multi-purpose units are ideal for isothermal incubation, enzyme reactions, immunoassays, nucleic acid denaturation and a wide variety of other laboratory procedures. Integral support rod holder with locking knob accepts optional External Temperature Probe Kit. Optional External Temperature Probe Kit monitors actual block or sample temperature. Block heater accepts one microplate block or two separate interchangeable modular blocks, accommodating various tube sizes from 0.2 ml micro-tubes to test tubes or vials up to 85 mm in height. Each block has a thermometer well for measuring block temperature. Efficient heating due to close tube-and-block contact with a low density design for exceptional temperature uniformity. The heated lid helps to regulate the temperature and reduce the amount of condensation on sample lids.Microprocessor controlLED-DisplayTemperature Calibration ModeCaution Hot IndicatorOvershoot ProtectionAudible AlarmWithout blocks. Please order separately.
€1.695,00
Dry Block Heaters, analogue | Capacity: 2 blocks, Length mm: 391, Width mm: 203
Dry Block Heaters, analogue | Capacity: 2 blocks, Length mm: 391, Width mm: 203
Brand: Ohaus GmbHAvailable in 4 variantsHigh wattage, constant-temperature Dry Block Heaters are economical, versatile and compact. These multi-purpose units are ideal for incubation and activation of cultures, enzyme reactions, immunoassays, melting/boiling points and a wide variety of other laboratory procedures. Each of the five models accept separate interchangeable modular blocks, accommodating various sample enclosures such as micro-tubes, centrifuge tubes, vials, microplates, and PCR strips or tubes. Each block has a thermometer well for measuring block temperature. Anodized aluminum modular blocks provide superior temperature stability and heat transfer.Microprocessor ControlAdjustment knobsWithout blocks. Please order separately.
€710,00
Dry Block Heaters, digital | Capacity: 1 block, Length mm: 315, Width mm: 203
Dry Block Heaters, digital | Capacity: 1 block, Length mm: 315, Width mm: 203
Brand: Ohaus GmbHAvailable in 4 variantsDesigned for applications that require repeatable results and superior temperature stability. These multi-purpose units are ideal for incubation and activation of cultures, enzyme reactions, immunoassays, melting/boiling points, and a wide variety of other laboratory procedures. Integral support rod holder with locking knob accepts optional External Temperature Probe Kit. Optional External Temperature Probe Kit monitors actual block or sample temperature. Each of the models accept separate interchangeable modular blocks, accommodating various tube sizes from 0.2 ml microtubes to 50 ml centrifuge tubes. Each block has a thermometer well for measuring block temperature. Efficient heating due to close tube-and-block contact for maximum heat retention.Microprocessor ControlLED DisplayTemperature Calibration ModeCaution Hot IndicatorAudible AlarmWithout blocks. Please order separately.
€770,00
25%
Dry Ice Machines SnowPack® | Type: SnowPack® 50, Ø mm: 50, Height mm: 30
Dry Ice Machines SnowPack® | Type: SnowPack® 50, Ø mm: 50, Height mm: 30
Brand: Bürkle GmbHAvailable in 2 variantsThe dry ice machine SnowPack® produces dry ice tablets of -79 ° C with 50 or 250 g weight within a short time. Suitable for all European siphon carbon dioxide cylinders with valve (W 21.80 x 1¼" acc. to DIN 477-1, no. 6) without pressure regulator.Operates without electricityTaint and odour freeApplications: Hospitals, universities, schools, laboratories, chemical industry, materials testing.Examples of use: Lowering the temperature in cooling baths or cold traps, pre-cooling tissue samples, ensuring safe transport or embedding biological substances, freezing blood and tissue samples, studies in chemistry, physics and materials technology, etc.
€274,55
€205,91
Dry Milk Butyrometer Teichert with Accessories | Fat %: 0 - 70, Devision: 1.0 (±0.5)
Dry Milk Butyrometer Teichert with Accessories | Fat %: 0 - 70, Devision: 1.0 (±0.5)
Brand: Gerber Instruments AGAvailable in 2 variantsWeighing method for 2,5 g dry milk, closed bulb with frosted label, with rubber stopper and glass nail.
€27,20
Dry Mill POLYMIX® PX-MFC 90 D | Type: POLYMIX® PX-MFC 90 D, With: Hammer grinding attachment, Min. speed rpm: 50
Dry Mill POLYMIX® PX-MFC 90 D | Type: POLYMIX® PX-MFC 90 D, With: Hammer grinding attachment, Min. speed rpm: 50
Brand: KINEMATICA GmbHAvailable in 6 variantsThe PX-MFC 90 D is suitable for dry sample grinding in the laboratory. It's possible to change the hammer and cutting mill sets.The blade grinding attachment is used for processing of dried, stringy and fibrous and grease-free materials. Application: Wood, straw, dried grease-free meat, leather, paper, carbon, synthetics etc.The hammer grinding attachment is used for processing of dried, brittle and grease-free materials. Application: Dried grain, dried beans, bones, rock, ceramics etc.Sieves 0.2mm up to 6mm diameterSafety system prevents start when lid is openPowerful three-phase motorMilling chamber with interchangeable insertsLED displayWorking volume of 300 ml (Funnel volume)1000 Watt, 3-phase motor provides a low noise level during operation, with 230 Volt connectionSieves from 0.2 to 6 mm mesh sizeIntegrated speed control with LED display for speed and status messagesSpeeds from 50 to 6,000 rpm for maximum grinding efficiencyThe motor cannot be operated when the chamber door is openIntegrated overheating, overload and rotor blocking protectionSafety stopper for certain grinding materialsScope of supply: Mill with Hammer or Cutting Mill sets, 2 mm sieve, tool set, wooden stand with 12 collection tubes
€7.623,00
Dry RC Dialysis Tubing Spectra/Por® 1, 2, 3 and 4 | Type: Spectra/Por® 1, 6 - 8 kD MWCO, Flat width mm: 32, Ø mm: 20.4
Dry RC Dialysis Tubing Spectra/Por® 1, 2, 3 and 4 | Type: Spectra/Por® 1, 6 - 8 kD MWCO, Flat width mm: 32, Ø mm: 20.4
Brand: Repligen Europe B.V.Available in 20 variantsRC dialysis tubing supplied dry with glycerol humectant for easy handling and manipulation. Soak in DI water for 30 minutes to remove glycerol. Contains trace levels of heavy metals and sulphides.
€326,00

Our website uses cookies.
Both we and our third-party partners use cookies. Some are strictly necessary for the site to function, but there are also optional cookies.

Necessary and functional cookies are always on. If you click "accept all cookies", you also accept the optional cookies. You can choose which cookies you want to enable via "set preferences".

Our website uses cookies.
What are cookies? What cookies do we use and why? Read more in our cookie policy

Necessary cookies

Cookies that are indispensable for your visit to the Website and the correct use thereof

Functional cookies

Cookies that make it easier and more pleasant for you to visit the Website, for example by personalising your browsing experience.

Performance cookies

Cookies that collect information about your use of the Website in order to improve the content of the Website and adapt it to the wishes of the User.

Third-party cookies

Cookies placed by third parties who offer their own services via the Website, such as social media, advertisements or video services.