Please wait

Your message is being sent

An error occurred

Analytical measurement and testing

Chromatography

Cleaning and sterilisation

Cleanroom

Distillation, separation, filtration

Environmental-, soil-, water-, food analysis

General laboratory consumables

Heating and cooling technology

Life sciences

Liquid handling

Occupational safety, security

Optical instruments and microscopes

Sample preparation

Stirring, shaking, mixing

Vacuum technology, drying, dry storage

254255256257258259
Dilution microliter pipette Acura®manual 810, fix | Capacity: 0.1 ... 1 ml
Dilution microliter pipette Acura®manual 810, fix | Capacity: 0.1 ... 1 ml
Brand: SOCOREX ISBA SAThis air displacement micropipette allows subsequent pipetting of 1 and 0.1mL of same liquid. The two pre-calibrated fixed volumes eliminate any setting. A universal metal nozzle accommodates straw tips (length 190mm, diameter 4 mm), most adequate to aspirate from deep, narrow vials or Stomacher bags.Ideal alternative to conventional graduated glass pipettes when performing serial 1:10 dilutions in bacteriology.
€272,00
Dilution water containers for BOD depletion water | Type : VD 30, Capacity l : 30
Dilution water containers for BOD depletion water | Type : VD 30, Capacity l : 30
Brand: Behr Labor-Technik GmbHAvailable in 6 variantsWith vent, level display and stopcock. Blue solid-coloured (for light protection). Additional lid for easier cleaning.VD series: With distributor frits and compressed air connection without cooling coil.VDT series: With distribution frits and compressed air connection, with internal stainless steel cooling coil and connection for recirculation thermostat. 2x connections inlet / outlet cooling water: 2x ¾" with screwed on ½" connection with nozzle approx. 13 mm. Third connection for ventilation with 6 mm nozzle.
€252,50
Dimpled Mats for Rocking Shakers SHRK series and Tumbling Shakers SHWV series
Dimpled Mats for Rocking Shakers SHRK series and Tumbling Shakers SHWV series
Brand: Ohaus GmbHAvailable in 3 variants
€57,90
Dimroth condensers for extractors, with glass olives, DURAN® tubing | Volume ml: 100 - 250, Cone NS: 45/40, Cooling surface cm²: 370
Dimroth condensers for extractors, with glass olives, DURAN® tubing | Volume ml: 100 - 250, Cone NS: 45/40, Cooling surface cm²: 370
Brand: Lenz-Laborglas GmbH & Co. KGAvailable in 5 variantsFor condensing vapours, with NS cone, water connection: glass olives, made of DURAN® tubing.
€114,28
Dimroth condensers, DURAN® tubing | Effective length mm: 250, Cone NS: 14/23, Socket NS: 14/23
Dimroth condensers, DURAN® tubing | Effective length mm: 250, Cone NS: 14/23, Socket NS: 14/23
Brand: Lenz-Laborglas GmbH & Co. KGAvailable in 6 variantsMade of DURAN® tubing. Dimroth condensers acc. to DIN 12591 and in addition to DIN standard, for condensing vapours, with NS socket and cone, water connection: glass olives or GL 14 threads with two threaded plastic olives.
€126,27
Dip samplers, PP | Volume ml: 140, Immersion depth: 500 mm, Ø mm: 25
Dip samplers, PP | Volume ml: 140, Immersion depth: 500 mm, Ø mm: 25
Brand: Bürkle GmbHAvailable in 3 variantsFor simple removal of liquid samples.Good view due to transparent tubesUpper end with reflux valve, lower end with ball valveAll-layer and point sampling possible500 ml dip sampler stepless extendable
€52,65
Dipper/Sieve Chemware®, PFA | Ø mm : 76, Length mm : 180, Description : Sieve
Dipper/Sieve Chemware®, PFA | Ø mm : 76, Length mm : 180, Description : Sieve
Brand: Saint GobainAvailable in 2 variantsResistant to most chemicals, the articles are ideal for ultra-pure applications and use with aggressive media. Handle design allows dipper to hook over edge of vessel, eliminating dripping of corrosive fluids onto surrounding surface. Use with containers that have at least an 80 mm opening. The sieve mesh size is available in 1.0 mm.Non-contaminating and resistant to most chemicalsSuperior chemical resistanceLowest concentration of metal ions of any fluoropolymerIdeal for coarse sorting or draining of aggressive mediaHandle hooks over edge of vessel for draining
€78,20
Dipping chamber racks, PP, for 2 dipping chambers | Type: Dipping chamber rack, Width mm: 253, Depth mm: 70
Dipping chamber racks, PP, for 2 dipping chambers | Type: Dipping chamber rack, Width mm: 253, Depth mm: 70
Brand: Bionis SASServes as a holder during the dipping process and for storing the dipping chambers.
€151,00
Dipping chamber, glass insert | Type: For TLC plates up to 100 x 100 mm, reagent required approx. 25 ml
Dipping chamber, glass insert | Type: For TLC plates up to 100 x 100 mm, reagent required approx. 25 ml
Brand: Bionis SASAvailable in 3 variantsFor TLC platesHighly-resistant glassClear width 5 mmSmall volume of reagent required
€220,00
Dipping flow cups Frikmar | Flow nozzle mm: 5, Material: stainless steel
Dipping flow cups Frikmar | Flow nozzle mm: 5, Material: stainless steel
Brand: Fritz Arndt Frikmar KGAvailable in 10 variantsAluminium. DIN 53211 viscometer. With brass nozzle or stainless steel (V2A) as indicated. For all types of liquid chemicals, varnishes, fluid enamels, gravure printing inks and leather dyes, oils, fats, foodstuffs etc. Cup volume 100ml.
€57,70
Dipping vessels for sampling | Type: Dipping bottle
Dipping vessels for sampling | Type: Dipping bottle
Brand: Bürkle GmbHAvailable in 7 variantsAccording to DIN 51750 pt. 2Dipping VesselFor sampling liquids from tanks, lorry tankers, etc. Made of brass or stainless steel AISI 304 (1.4301) for Ex areas. 1 L capacity, 82 mm diameter, 427 mm height with handle. Without lowering cable.Operation: When the dipping vessel is lowered, the liquid constantly runs through it. By pulling back, both valves close automatically.Emptying at the top via the open flaps.Dipping bottle EXFor sampling flammable liquids.For sampling category A mineral oil products, Explosion Categories IIA, IIB and IIC. Made from brass that do not produce sparks, 89 mm diameter, 443 mm height with handle, weight 3.3 kg. Without lowering cable.Operation: 1. Lower bottle into liquid. 2. Pull the cable when the target spot has been reached and the stopper opens. 3. Sample flows in. 4. Pull up dipping bottle and remove sample. Use an electrically conductive, manually operated reel and lowering cable or chain.Dipping bottle glassFor sewage disposal plants, sludge and water samples. Nickel-plated brass frame with glass sample bottle. 1000 ml capacity, 148 mm diameter, 330 mm high, weight 3.2 kg. Without lowering cable.Operation: 1. Lower bottle into liquid. 2. Pull cable when target depth is reached and open stopper. 3. Sample flows in. 4. Pull bottle back up and remove sample.Immersion CylindersFor target spot and bottom samples of mineral oil products. Made of nickel-plated brass. Heavy, robust design (4.3 kg). Without lowering and pull cablesTarget spot sample: 1. Immersion cylinder is lowered in the tank to be sampled by the manually operated reel. 2. The separate pull cable is used to open the valve when the target spot is reached and the sample then enters the immersion cylinder.Bottom sample: 1. Lower the immersion cylinder to the bottom. 2. The weight of the immersion cylinder opens the valve automatically when the bottom is reached and the sample then enters the immersion cylinder.Target immersion cylinderWith the Target immersion cylinder, liquid samples can be taken from a particular point. The immersion cylinder is lowered on a strong and sealed tube. When the target has been reached, a valve at the tube end is opened. This vents the immersion cylinder and fills it with the sample. The immersion cylinder is pulled up and emptied via the screw thread. Weight 2.6 kg. With 5 m venting tube. Screw off top enables easy cleaning.Mini immersion cylinderFor sampling liquids in narrow places where access is difficult. Can also be used in curved dipping tubes and barrels with narrow openings. Capacity 50 ml, 32 mm diameter, height 180 mm, weight 330 g. Without lowering cable. Upper body unscrews for easy cleaning.
€553,50
254255256257258259

Copyright © 2026 - Achrom nv - BE 0445.025.508    |    General terms    |    Cookiebeleid    |    Privacybeleid    |    Handcrafted by CrayonCru®

Our website uses cookies.
Both we and our third-party partners use cookies. Some are strictly necessary for the site to function, but there are also optional cookies.

Necessary and functional cookies are always on. If you click "accept all cookies", you also accept the optional cookies. You can choose which cookies you want to enable via "set preferences".

Our website uses cookies.
What are cookies? What cookies do we use and why? Read more in our cookie policy

Necessary cookies

Cookies that are indispensable for your visit to the Website and the correct use thereof

Functional cookies

Cookies that make it easier and more pleasant for you to visit the Website, for example by personalising your browsing experience.

Performance cookies

Cookies that collect information about your use of the Website in order to improve the content of the Website and adapt it to the wishes of the User.

Third-party cookies

Cookies placed by third parties who offer their own services via the Website, such as social media, advertisements or video services.