Please wait

Your message is being sent

An error occurred

Analytical measurement and testing

Chromatography

Cleaning and sterilisation

Cleanroom

Distillation, separation, filtration

Environmental-, soil-, water-, food analysis

General laboratory consumables

Heating and cooling technology

Life sciences

Liquid handling

Occupational safety, security

Optical instruments and microscopes

Sample preparation

Stirring, shaking, mixing

Vacuum technology, drying, dry storage

123456
Clamp holder SP | Description: Belt length 150 cm
Clamp holder SP | Description: Belt length 150 cm
Brand: Buddeberg GmbHWith bosshead KR 260 for container diam.
€224,60
Compressed air industrial stirrers BSR 64 with floor stand | Type: BSR 64/30-A-V, Capacity max. litres: 200, Off-load speed rpm.: 300
Compressed air industrial stirrers BSR 64 with floor stand | Type: BSR 64/30-A-V, Capacity max. litres: 200, Off-load speed rpm.: 300
Brand: Buddeberg GmbHAvailable in 3 variantsBSR series stirrers perform routine mixing tasks up to 200 l.General specifications:operating pressure max. 6 barair consumption 800 l/min. at 6 barpower output 640 W at 6 barclockwise rotationATEX rating to Ex II 2G Ex h IIC T5 GbBasic models include:all-stainless steel housingcontinuously adjustable speed control valvespherical clamping device with support arm diam. 16 mm, length 200 mmfloor stand with rod (height 1000 mm, width 600 mm) and bossheadplug-in connector DN 7.8silenceroutput shaft L 32 mm x diam. 14 mm
€3.909,60
Compressed air powered stirrers, PLR, accessories | Type: K 10/13, Description: Flex coupling receiver i. d. 10/13mm
Compressed air powered stirrers, PLR, accessories | Type: K 10/13, Description: Flex coupling receiver i. d. 10/13mm
Brand: Buddeberg GmbHAvailable in 8 variantsConnection couplings VK:Fixed-diameter connection for motor/magnetic coupling drive shaft and stirring rod. Suitable for use in potentially explosive atmospheres. Material No. 1.4404.Flexible glass stirring shaft couplings PK:For stirring tasks using glass stirring rods. Elastic connector between motor and stirring shaft. Provides exact alignment of motor and shaft, and evens out axial and height differences. Accepts 6mm to 10mm diameter shafts.Flexible glass stirring shaft couplings K:For stirring tasks using glass stirring rods. Elastic connector between motor and stirring shaft. Provides exact alignment of motor and shaft, and evens out axial and height differences. Accepts 6mm to 10mm diameter shaftsDouble-Cardan-Coupling DCK I:With 8mm dia. hexagonal input drive receiver and 6mm square socket drive output.
€162,40
Connection couplings | Type: VK 14 x 12, For: BSR 64 with stand
Connection couplings | Type: VK 14 x 12, For: BSR 64 with stand
Brand: Buddeberg GmbHAvailable in 6 variantsFixed-diameter connection between motor and stirring shaft. Suitable for use in potentially explosive atmospheres (ATEX). Material no. 1.4404
€89,00
20%
Crescent-shaped stirring rotors, PTFE | Ø agitator mm: 90, Ø agitator shaft mm: 10, To fit chuck diam. mm: 8.0
Crescent-shaped stirring rotors, PTFE | Ø agitator mm: 90, Ø agitator shaft mm: 10, To fit chuck diam. mm: 8.0
Brand: Bohlender GmbHAvailable in 12 variantsThe semi-circular shape of the paddle is ideal for mixing in round-bottom flasks. The pivoting blade allows insertion into vessels with narrow necks and/or ground joints.
€198,68
€158,94
Cylinder oil | Type: Öl, Description: Cylinder oil 500ml
Cylinder oil | Type: Öl, Description: Cylinder oil 500ml
Brand: Buddeberg GmbHResin-free and non-corrosive oil for lubrication of compressed air stirrers.
€11,00
Diagonal blade stirring rotors, 4-blade, stainless steel 1.4404 | Ø agitator mm: 100, Ø agitator shaft mm: 10, Length mm: 550
Diagonal blade stirring rotors, 4-blade, stainless steel 1.4404 | Ø agitator mm: 100, Ø agitator shaft mm: 10, Length mm: 550
Brand: Buddeberg GmbHThe 4-blade diagonal blade stirring rotor provides axial flow and creates increasing shear forces at higher stirring speeds. Recommended for medium to high speed operations.Other sizes available on request.
€105,40
Dissolver stirrers, stainless steel 1.4571 | Type: R 1302, Stirring head Ø: 100 mm, Stirring rotor Ø: 10 mm
Dissolver stirrers, stainless steel 1.4571 | Type: R 1302, Stirring head Ø: 100 mm, Stirring rotor Ø: 10 mm
Brand: IKA-Werke GmbH & Co.KGAvailable in 3 variantsThe dissolver stirrers create a radial flow with high turbulence. The mixture is drawn from top to bottom. High shear forces are created at the dissolver disk, which provides effective particle reduction. Recommended for medium to high speed operations.
€647,00
Dissolver stirring rotors, stainless steel 1.4404 | Ø agitator mm: 60, Ø agitator shaft mm: 10, Length mm: 550
Dissolver stirring rotors, stainless steel 1.4404 | Ø agitator mm: 60, Ø agitator shaft mm: 10, Length mm: 550
Brand: Buddeberg GmbHAvailable in 6 variantsThe dissolver stirring rotor creates a radial flow with high turbulence. The mixture is drawn from top to bottom. High shear forces are created at the dissolver disk, which provides effective particle reduction. Recommended for medium to high speed operations.
€184,70
Finger-operated oiler OT | Type: ÖT, Description: Finger-operated oiler
Finger-operated oiler OT | Type: ÖT, Description: Finger-operated oiler
Brand: Buddeberg GmbHFor manual lubrication of compressed air coming into the motor.
€257,50
Flexible clutch | Type: FK 1
Flexible clutch | Type: FK 1
Brand: Buddeberg GmbHRequired for stirring tasks using glass stirring rods. The flexible coupling compensates for any structural variances.
€146,00
Globe Stirrer Couplings, POM | Opening for stirrer shaft mm: Inner square SW6, Chuck adaptor Ø bottom mm: SW8, Overall length mm: 180
Globe Stirrer Couplings, POM | Opening for stirrer shaft mm: Inner square SW6, Chuck adaptor Ø bottom mm: SW8, Overall length mm: 180
Brand: Bohlender GmbHAvailable in 8 variantsMade of POM, a plastic material with a good mechanical strength, powerful transmission of up to 300 Ncm, suitable for a speed of up to 1.200 rounds per minute, maximum misalignment of axes 10 mm. Ideal for balancing misalignment of axes between agitator and stirrer shaft, suitable for glass, metal or PTFE stirrer shafts.very low centrifugal forces due to low weightsuitable for both left and right-handed rotationno resonancesimple assembly by means of screw joints with clamp ringspivot (length 90 mm) can be shortened by the user
€136,51
123456

Copyright © 2026 - Achrom nv - BE 0445.025.508    |    General terms    |    Cookiebeleid    |    Privacybeleid    |    Handcrafted by CrayonCru®

Our website uses cookies.
Both we and our third-party partners use cookies. Some are strictly necessary for the site to function, but there are also optional cookies.

Necessary and functional cookies are always on. If you click "accept all cookies", you also accept the optional cookies. You can choose which cookies you want to enable via "set preferences".

Our website uses cookies.
What are cookies? What cookies do we use and why? Read more in our cookie policy

Necessary cookies

Cookies that are indispensable for your visit to the Website and the correct use thereof

Functional cookies

Cookies that make it easier and more pleasant for you to visit the Website, for example by personalising your browsing experience.

Performance cookies

Cookies that collect information about your use of the Website in order to improve the content of the Website and adapt it to the wishes of the User.

Third-party cookies

Cookies placed by third parties who offer their own services via the Website, such as social media, advertisements or video services.