Please wait

Your message is being sent

An error occurred

Coating thickness gauges, digital, TF | Measuring range µm: 100/1250, Readability: 0,1/1 µm, Dimensions (WxDxH): 126 x 65 x 35 mm
Coating thickness gauges, digital, TF | Measuring range µm: 100/1250, Readability: 0,1/1 µm, Dimensions (WxDxH): 126 x 65 x 35 mm
Brand: Kern & Sohn GmbHFor non-magnetic coatings on iron and steel and coatings on non-magnetic metals. The Offset-Accur function allows you to adjust the instrument precisely on the locally measured range by a two-point calibration. This results in a higher accuracy of approx. 1 % of the measured value.LCD display, backlitScan mode allows continuous measurement or single point measuring modeMini Statistics Kit: displays the measured result, the average value and the max and the min valueInternal memory up to 99 valuesSelectable measuring units: µm, inch (mil)Data interface RS-232Scope of supply:Coating thickness gauge, base plate, calibration foils, carrying case
€600,00
Coating thickness gauges, digital, TG | Measuring range µm: 100/1250, Readability: 0,1/1 µm, Dimensions (WxDxH): 126 x 65 x 35 mm
Coating thickness gauges, digital, TG | Measuring range µm: 100/1250, Readability: 0,1/1 µm, Dimensions (WxDxH): 126 x 65 x 35 mm
Brand: Kern & Sohn GmbHFor non-magnetic coatings on iron and steel and coatings on non-magnetic metals. The Offset-Accur function allows you to adjust the instrument precisely on the locally measured range by a two-point calibration. This results in a higher accuracy of approx. 1 % of the measured value.LCD display, backlitScan mode allows continuous measurement or single point measuring modeMini Statistics Kit: displays the measured result, the average value and the max and the min valueInternal memory up to 99 valuesSelectable measuring units: µm, inch (mil)Data interface RS-232Scope of supply:Coating thickness gauge, external sensor, base plate, calibration foils, carrying case
€600,00
Colour band for matrix needle printer | Description : Colour band for matrix needle printer
Colour band for matrix needle printer | Description : Colour band for matrix needle printer
Brand: Kern & Sohn GmbHBlack.
€19,00
Combi infrared and insertion thermometer TLC 750i-V2 | Type: TLC 750i-V2, Temperature infra-red: -50 ... 250 °C, Resolution infra-red: 0.1 °C
Combi infrared and insertion thermometer TLC 750i-V2 | Type: TLC 750i-V2, Temperature infra-red: -50 ... 250 °C, Resolution infra-red: 0.1 °C
Brand: Xylem Analytics Germany (EBRO)Handy infrared thermometer for non-contact measurement of surface temperature or core temperature with the foldable insertion probe. Ideal for time-saving, precise temperature measurements during goods receipt, as well as during storage and transport of goods and foodstuffs.Practical pocket size for daily useSimplified operationBacklit display allows reading in dark environmentRotating display makes it easy to read the measured valueDouble laser pointerOptics 8:1HACCP and DIN EN 13485 compliant, incl. calibration certificateWaterproof housing (IP 65)
€133,00
Combination Infrared and Penetration Thermometer TLC 750i | Type: TLC 750i
Combination Infrared and Penetration Thermometer TLC 750i | Type: TLC 750i
Brand: Xylem Analytics Germany (EBRO)Handy, waterproof infrared thermometer with large measurement range for non-contact measurement of the surface temperature and secure core temperature measurement with the folding penetration probe. For time-saving, precise temperature measurements at incoming goods, production and storage of diverse goods and food. Conform to HACCP and DIN EN 13485. With battery and factory calibration certificate.Display with backlight for reading in dark environmentsDisplay can be upside down for reading from both sidesDouble laser pointer
€133,00
Combination pH Electrodes | Description: 4.5 mm semi-micro, 90 mm reach, glass bodied for small volume liquid samples
Combination pH Electrodes | Description: 4.5 mm semi-micro, 90 mm reach, glass bodied for small volume liquid samples
Brand: Cole-Parmer Ltd. (Jenway)Available in 5 variants
€226,54
Combination pH Electrodes | Type: Combination electrode N 6000 A
Combination pH Electrodes | Type: Combination electrode N 6000 A
Brand: Xylem Analytics Germany (SI)Available in 2 variants
€359,00
Combination probe temperature/humidity for PDF data logger LOG40 | Temperature: -40 ... 70 °C, Relative humidity: 0 ... 100 %, Sensor (ØxL): 15 x 43 mm
Combination probe temperature/humidity for PDF data logger LOG40 | Temperature: -40 ... 70 °C, Relative humidity: 0 ... 100 %, Sensor (ØxL): 15 x 43 mm
Brand: DOSTMANN electronic GmbHCombination probe for measuring temperature and relative humidity.
€20,00
Combination probe temperature/humidity/pressure for PDF data logger LOG40 | Temperature: -40 ... 70 °C, Relative humidity: 0 ... 100 %, Pressure: 300 ... 1100 hPa
Combination probe temperature/humidity/pressure for PDF data logger LOG40 | Temperature: -40 ... 70 °C, Relative humidity: 0 ... 100 %, Pressure: 300 ... 1100 hPa
Brand: DOSTMANN electronic GmbHCombination probe for measuring temperature, relative humidity, and barometric pressure.
€35,00
Combined density and refractometry index standards | Type: Dodecane, Refractive Index at 20 °C: 1.422, Density at 20 °C g/cm3: 0.749
Combined density and refractometry index standards | Type: Dodecane, Refractive Index at 20 °C: 1.422, Density at 20 °C g/cm3: 0.749
Brand: Mettler-Toledo GmbH (Waagen)Available in 4 variantsFor density and refractometer calibration in one step. Bottles can directly be used in SC1 and SC30 automation units. Coded with barcodes for fully automatic verification procedure in METTLER-TOLEDO LiQC systems.
€240,00
Combined redox electrodes InLab® | Type: InLab® Redox Pro, Length mm: 120, Shaft diameter mm: 12
Combined redox electrodes InLab® | Type: InLab® Redox Pro, Length mm: 120, Shaft diameter mm: 12
Brand: Mettler-Toledo Online GmbHAvailable in 6 variantsRedox combination electrodes for measuring the oxidation/reduction potential in aqueous solutions. The signal is generated on the surface of the indicator electrode by an electron exchange with the oxidation/reduction system of the measured medium. Without temperature sensor. With Safelock™ end ring for easy refilling of the reference electrolyte and complete sealing in closed position. For use with a wide variety of measuring instruments.InLab® Redox: For general purpose. With platinum ring indicator electrodeInLab® Redox Pro: For emulsions, wastewater analysis and general purpose. With movable ground joint junction and platinum ring indicator electrodeInLab® Redox L: For large samples. With platinum ring indicator electrodeInLab® Redox Au: Combined redox electrode with gold ring indicator electrodeInLab® Redox Ag: Combined redox electrode with silver ring indicator electrodeInLab® Redox Micro: For small samples. With platinum ring indicator electrodePlease order connection cable separately.
€453,00
Combined redox electrodes | Type: DMi144-SC, Length mm: 296.0
Combined redox electrodes | Type: DMi144-SC, Length mm: 296.0
Brand: Mettler-Toledo GmbH (Waagen)Available in 8 variantsDM140-SC: Combined platinum ring redox electrode. For titrations with a change of the pH value, e.g. oxidation with potassium permanganate, copper determination with iodine, back titration with thiosulfate. With S7 screw cap and ARGENTHAL™ reference system.DMi240-SC: Same as DM140-SC, with Plug & Play functionality.DM141-SC: Combined silver ring electrode for argentometric titrations, determination of halides, sulfides and mercaptanes in aqueous media. Also suitable for determination of salt and silver content. With S7 screw cap and ARGENTHAL™ reference system.DMi141-SC: Same as DM141-SC, with Plug & Play functionality.DM143-SC: Double pin platinum electrode for electrochemical titrations, e.g. water determination acc. to Karl Fischer, bromine number determination and sulfur dioxide determination in aqueous media. With S7 screw cap and ARGENTHAL™ reference system.DMi144-SC: Combined platinum ring redox electrode. For titrations with a change of the pH value, especially designed for COD determination with the Rondo 20 COD rack. With Plug & Play functionality and ARGENTHAL™ reference system.DMi145-SC: Combined silver ring electrode for argentometric titrations, determination of halides, sulfides and mercaptanes in aqueous media. Also suitable for determination of salt and silver content. With Plug & Play functionality and ARGENTHAL™ reference system.DMi148-SC: Combined silver ring electrode for argentometric titrations without a change of the pH value. For determination of halides, cyanides, sulfides and mercaptanes in mineral oil and bioethanol.
€578,00

Our website uses cookies.
Both we and our third-party partners use cookies. Some are strictly necessary for the site to function, but there are also optional cookies.

Necessary and functional cookies are always on. If you click "accept all cookies", you also accept the optional cookies. You can choose which cookies you want to enable via "set preferences".

Our website uses cookies.
What are cookies? What cookies do we use and why? Read more in our cookie policy

Necessary cookies

Cookies that are indispensable for your visit to the Website and the correct use thereof

Functional cookies

Cookies that make it easier and more pleasant for you to visit the Website, for example by personalising your browsing experience.

Performance cookies

Cookies that collect information about your use of the Website in order to improve the content of the Website and adapt it to the wishes of the User.

Third-party cookies

Cookies placed by third parties who offer their own services via the Website, such as social media, advertisements or video services.