Archrom

Brand: Camping Gaz (Deutschland) GmbHAvailable in 7 variantsC 206 GLS pierceable cartridgePiercing cartridge with integrated gas lock system according to EN 417: 2012. For bunsen burner without safety valve. For bunsen burners Labogaz® 206 and Soudogaz blow torches.CV470 Plus and CV 300 Plus valve cartridgeWith safety valve. For bunsen burner Labogaz® 470.CV 360 valve cartridgeWith safety valve. For gas-safety burner schuett phoenix (Cat.-No. 9.018 761).Safety valve allows removal of partially used valve gas cartidges.

€126,00

Brand: WLD-TEC GmbHAvailable in 4 variantsFor gasprofi 1 SCS micro / Fuego SCS / Flame100.Scope of supply:Integrated pressure regulator 50 mbar, DVGW tubing (0.5 m)

€138,00

Brand: WLD-TEC GmbHCan be operated directly on the touch panel of the device or via optional foot pedalFast and efficient, the sterilisation process takes only 10 secondsScope of supply: SteriMax basic, mains cable, 1 x Inoculation loop Ø 3 mm, 1 x Inoculation loop holder, power cable

€737,00

Brand: WLD-TEC GmbHAuto-Start through touchless IR-Sensor technologyTouch operationAdjustable sterilisation and cool-down timers for two usersScope of supply: SteriMax smart, 2 x quartz glass heating tubes, inoculation loop holder, inoculation loop (diam. 3 mm), holding device for 3 inoculation loops, power cable

€959,00

Brand: schuett-biotec GmbHAvailable in 2 variantsSterilisation with light. Sterilisation of inoculating loops, tweezers and small instruments within seconds.Sturdy and maintenance-freeNo gas, no open flame - Works with standard electrical powerIntuitive, easy to useInstant, ready-to-use, no warm-up time, no waitingSterilization temperature: 900 to 1300°CTouch-free START, with IR- sensor and adjustable timer (5 to 7 seconds)For use in Laminar Flow CabinetsIdeal for mobile operation in the fieldThe schuett solaris is the perfect solution if an open flame should be avoided or gas cartridges etc. are not available. Used with standard electrical power. Reaches the safe working temperature of 900 to 1300°C within a split second. No excess heat, no energy consumption between work cycles. START is generated by an infra-red sensor, which allows for efficient one-handed operation. Pathogenic material is kept inside the sterilization chamber. No spreading, no splashing. Working angle adjustment (4-steps).Scope of supply: schuett solaris inoculation loop sterilizer, 2 x quartz glass tubes, 1 x inoculation loop holder with inoculation loop (sample)

€65,00

Brand: schuett-biotec GmbHQuartz tube with bottom.

€65,00

Brand: schuett-biotec GmbHAvailable in 5 variantsFor sterilising, heating, flame sterilising. For use in every microbiological laboratory or in safety cabinets. Modern Bunsen burner with state-of-the-art safety features plus outstanding quality characteristics:Controlled burning time 1 sec to 120 min (selectable)Automatic safety shut-off (selectable)Overheating protection / burner control by sensorsPrecise economic flame regulation (stable flame in strong air current)Flame and ignition monitoring"Push-and-Twist" bayonet fixture for burner head, no tools needed for cleaningTilting right or leftOperating status, safety notes and warnings pictures and full text (color display) written language for most international languages. Brilliant colour display. Unique Joy-Stick navigation. Operating modes: by hand or with foot pedal or motion sensor. Housing made of stainless steel and safety glass. UV- and solvent resistant. For case of cleaning and flame-sterilising. Suitable for use with natural gas (central gas) or butane/propane gas (gas cartridges). Integrated stand for tilting right or left. Safety standard acc. to DIN 30665 part 1, DIN-DVGWschuett phoenix II eco: (with LED control lamp and foot-switch) Start flame by foot-switch or button (On/Off). Best suited for use in microbiological safety cabinets. Best price to performance ratio.schuett phoenix II standard: (brilliant colour display, selection of native language, sensor and foot- switch) Start/Stop flame by activating sensor 1x or 2x, use foot switch or press button by hand. Continuous display of timer.schuett phoenix II accu: (brilliant colour display, selection of native language, sensor and built-in extra heavy duty power cells) Start/stop flame by activating sensor 1x or 2x, use foot-switch or press button by hand. Continuous display of timer and battery power. Operates for up to 30 hours, intermittent use. Complete with battery charger for 3 hour recharging. Ideal for mobile usage.Flame sterilization carousels semi- and fully automated: For precise and time-controlled flaming of different kinds of inoculating loops. Minimization of gas consumption, the life of the inoculating loops is significantly increased. The inoculating loop is placed into the carousel after use and is sterilized immediately after turning the holder in flaming position. Sterilization time infinitely adjustable. Designed for continuous work-flow with sample series in the Laminar Flow.Semi-automated: schuett easyloop (for 6 Inoculating loop holders, included): Comfortable manual rotation,fully automated flaming process. For use with Safety Bunsen Burners schuett phoenix II standard and accu.Sterilization time: 3 to 5 s (adjustable from 1 s to 120 min)Fully automated: schuett flammy R (for 5 Inoculating loop holders, included): Fully automated rotation and inoculating. In combination with a standard gas-safety-burner (e.g. schuett phoenix II). Sterilization time: 2 to 10 s

€990,00

Brand: WLD-TEC GmbHThe safe alternative for all traditional Bunsen or alcohol burners.Multi-Use: The Flame100 is ideally suited for all flame related applications in the laboratory. The precision flame allows graduated heating of dental tools as well as safe sterilization of microbiological instruments. Flame size and intensity can be adjusted infinitely.Easy operation: The safety Bunsen burner Flame100 activates immediately with the push of a button. No match or a pilot flame are required. Optionally, the Flame100 can also be operated by a foot pedal or an external infrared motion sensor. The Flame100 is suitable for stationary natural gas and propane / butane gas supplies as well as gas cartridges or gas cylinders. Numerous adapter systems are optionally available.Reliable safety: The proven Safety Control System (SCS) is also incorporated in the Flame100. All potential hazards are constantly monitored and, if necessary, protective measures, such as shutting off the gas supply, are activated. In addition to the ignition and flame control function and the overheating protection the safety package also features the continuous burner head control BHC. BHC unfailingly identifies burner head clogging by liquids or solid substances. Approved by DIN-DVGW, approval no. NG2211AS0167. 2 years warranty.

€308,00

Brand: WLD-TEC GmbHAvailable in 4 variantsSuitable for all flame related applications in the laboratory. The low profile body facilitates ergonomic operation; the streamlined design reduces air flow disturbances in a Cleanroom workbench. The Fuego SCS series can be operated with foot pedal, button function or touch free lR-Sensor. Made of stainless steel, with fireproof controls.SCS Safety Control System with gas safety cut off: lgnition and flame control, temperature monitor, automatic unit switch off, residual heat display, burner head assembly monitor.BHC Burner Head Control.Removable burner head.Tilt mechanism right / left.Turbo flame.Holding device for 3 inoculation loop holders.Operation with stationary natural gas and propane/butane gas supplies, cartridge gas or gas cylinders.Approved by DIN-DVGW, approval no. NG2211AS0167.Warranty: 2 years.Fuego SCS basic / Fuego SCS basic RF: With stainless steel foot pedal. The foot pedal regulates the burning time either by continuous foot pressure or by start-stop function. Instrument with ON/OFF button function. Basic model without lR-Sensor and without graphic display.Fuego SCS basic RF: Features as Fuego SCS basic but enables wireless operation due to modern radio foot pedal.Fuego SCS / Fuego SCS pro: with Double-Click lR-sensor, button function and foot pedal operation. (foot pedal optional). Double-Click IR-sensor: This adjustable safety function ensures that the burner can only be ignited by activating the lR-Sensor twice. Adjustable lR-sensor reaction distance: 5mm to 50mm.Illuminated graphic display: The animated, self-explanatory and language-less symbol display facilitates a rapid selection of all functions. 6 standard-programs with count down display: 1sec to 2hrs selectable.The first safety laboratory gas burner with comfort package: Cooling time reminder for inoculation loops, temperature regulation for heating media, gas consumption display for gas cartridges, flexible and individual by selecting user account, acoustic signals as operating aids.Additional safety assistance: Zero-pressure shut off for a pressureless gas hose. Graphical installation instructions facilitate the initial start-up.Fuego SCS pro: Features as Fuego SCS, plus battery operation (9hrs), 2 rechargeable batteries (Mignon AA), fast charge function (3hrs) and safety tilt sensor.Additional accessories are available on request.

€617,00

Brand: WLD-TEC GmbHAvailable in 2 variantsSafe gas burner for sterilizing, heating and other flame related applications. In the event of unforeseen extinction, the flame is automatically re-ignited. If the flame extincts and does not re-ignite, the burner automatically closes the gas supply.Safety Control System (SCS) with ignition and flame control function and over temperature protectionAll outer components made of stainless steelDismountable burner headSpace-savingLow working heightOperation with stationary natural gas and propane / butane gas supplies, cartridge gas or gas cylindersEnergy savingTilt adjustmentApproved by DIN-DVGW, approval no. NG2211AS10672 years guaranteegasprofi 1 SCS micro school editionOptimal safety in schoolsButton function2 standard programs for button (function knob) and foot pedalOptional operation via foot pedal or external DoubleClick IR sensorgasprofi 1 SCS microOptimal in clean room workstations and in laboratoriesDoubleClick IR sensor, button function and stainless steel foot pedal5 standard programs for IR sensor, button (function knob) and foot pedalIR sensor with adjustable operating distanceBurner head control (BHC) and residual heat indicatorHolding device for 3 inoculation loop holders

€566,00

Brand: Simon Keller AGAvailable in 6 variantsThe STERI second sterilisers permit instant disinfection and sterilization of all small instruments directly at the workplace. Especially suitable for laminar flow cabinets. Biological investigations and tests prove that the 250 °C temperature maintained in the glass bead container guarantees complete destruction of all micro-organisms and spores within a few seconds. The one part of the instrument which is inserted into the STERI glass beads is sterilized. The STERI 250 and 350 are two versions of the same quality apparatus, with a stainless steel container, high-performance heating element, reduced heating time, high precision thermostat, temperature limiter and built-in thermometer.For perfect hygiene directly at the workplaceA guaranteed Swiss quality productSTERI 250: Steriliser incl. plain metal cover, glass-cup and glassbeads (150 g). Suitable for small & medium sized instruments (scissors, tweezers, forceps, knives, blades, spatulas, etc.).STERI 350: Steriliser incl. plain metal cover and glassbeads (300 g). Especially suitable for medium sized and longer instruments.

€420,00

Please wait

An error occurred