Deep freeze labels TOUGH-SPOTS® | Ø mm: 9.5, Colour: Yellow, For vessels: 0.5 ml Tubes
Brand: Heathrow Scientific DBTAvailable in 14 variantsPre-cut Peel-off round lables for 0.5 and 1.5/2.0ml microcentrifuge tube tops. Temperature resistant from -196 °C to 80 °C. Easy to write on: PVC labels accept writing from most lab markers. Convenient: Dispensing box assists in labeling individual tubes used in small experiments.Deep freeze labels TOUGH-SPOTS® | Ø mm: 9.5, Colour: Yellow, For vessels: 0.5 ml Tubes
€58,52
Deep freeze labels | Ø mm: 13.0, Colour: White, For vessels: 1.5 / 2.0 ml Tubes
Brand: ISOLAB Laborgeräte GmbHAvailable in 6 variantsManufactured from polyfiber grade flexible paper with acrylic resin adhesive back. This unique combination expands and retracts together with temperature fluctuations and always guarantees a strong adhesive bond. Chemically inert, resists to water, moisture and most organic solvents and caustic agents. Can be used between -196 to 80 °C temperature range. Sticks to any clean surface including PTFE coated surfaces without cracking, peeling and degrading. Peels off without leaving any sticky residue. Recommended to be used on tube caps with different diameters.Supplied as white color or pack of 6 different colors matching the universal hazard color codes (yellow for chemical reactivity, blue for health hazards, green for safety, red for flammability, orange tape for biohazard and white for general use).Deep freeze labels | Ø mm: 13.0, Colour: White, For vessels: 1.5 / 2.0 ml Tubes
€37,00
Floating Centrifuge Tube Racks, PP | For tubes ml: 1.5 ... 2.0, Colour: White, Dimensions (W x D x H) mm: 77 x 269 x 43
Brand: Bel-Art ProductsAvailable in 2 variantsOpen style floating rack provides tubes with maximum contact with the water and better circulation of the water bath around the tubes, allowing superior temperature control of samples. Tubes are held tightly in rack and can be removed easily.End handles allow easy transportStackableSteam autoclavable at 121 °CFloating Centrifuge Tube Racks, PP | For tubes ml: 1.5 ... 2.0, Colour: White, Dimensions (W x D x H) mm: 77 x 269 x 43
€58,25
Floating cryovial racks Nalgene™, Type 5974, PP | Type: 5974, Description: Square, For tubes ml: 1.0/1.2/1.5/2.0
Brand: Thermo Elect.LED GmbH (Nalge)Available in 3 variantsFor 05 to 2.0ml test tubes and cryovials. Racks will float with a full load of filled tubes. With moulded identification numbers and letters.Floating cryovial racks Nalgene™, Type 5974, PP | Type: 5974, Description: Square, For tubes ml: 1.0/1.2/1.5/2.0
€9,06
Floating racks PrepSafe™ for microcentrifuge tubes, PP | Colour: Natural
Brand: Bel-Art ProductsAvailable in 4 variantsUnique tabs protect your samples from loss and contamination. Place tubes in slots and slide under tabs to keep tubes in place and caps closed when under pressure, floating or submerged. Use in water baths, ice baths or on the benchtop period.Holds up to twelve 1.5ml or 2.0ml microcentrifuge tubes in numbered locationsRaised handle for easy lifting without agitating samples; stable feet keep racks upright on the bench95mm outer diameter fits most 1000ml beakersWith removable vortexing attachment, this allows samples to be vortexed simultaneouslySteam autoclavable at 121°CFloating racks PrepSafe™ for microcentrifuge tubes, PP | Colour: Natural
€85,19
Floating Tube Racks, PE | Type: Parallelogram, For tubes ml: 15, Colour: Blue
Brand: Heathrow Scientific LLCAvailable in 4 variantsPolyethylene foam. Resist water absorption so racks can be washed and reused. Ideal for floating tubes in water baths, tubs, or beakers. Racks include detachable carrying handles, to lift samples out of baths easily.Floating Tube Racks, PE | Type: Parallelogram, For tubes ml: 15, Colour: Blue
€30,00
Grippers for cryogenic and vaccine vials, PP | Description: Grippers for cryogenic and vaccine vials, Material: PP, Colour: Blue
Brand: Heathrow Scientific LLCFor precise gripping and safe removal of cryogenic microtubes and vials, as well as crimped vaccine/serum vials from cold storage boxes. Set consisting of one gripper for cryogenic vials (Ø 13.5 mm) and one gripper for vaccine vials (Ø 21 mm).Ergonomic squeeze areaAutoclavable at 121 °CGrippers for cryogenic and vaccine vials, PP | Description: Grippers for cryogenic and vaccine vials, Material: PP, Colour: Blue
€44,99
Grippers for cryogenic vials, PP | Description: Grippers for cryogenic vials, Material: PP, Dimensions (WxLxH): 15 x 143 x 23 mm
Brand: Heathrow Scientific LLCFor precise gripping and safe removal of cryogenic microtubes and vials from cold storage boxes. Set consisting of 5 different colours (red, purple, blue, green, and yellow).Ergonomic squeeze areaFor cryogenic vials up to Ø 13.5 mmAutoclavable at 121 °CGrippers for cryogenic vials, PP | Description: Grippers for cryogenic vials, Material: PP, Dimensions (WxLxH): 15 x 143 x 23 mm
€111,69
Grippers for vaccine vials, PP | Description: Grippers for vaccine vials, Material: PP, Dimensions (WxLxH): 20 x 152 x 35 mm
Brand: Heathrow Scientific LLCFor precise gripping and safe removal of crimped vaccine/serum vials from cold storage boxes. Set consisting of 5 different colours (red, purple, blue, green, and yellow).Ergonomic squeeze areaFor vaccine vials up to Ø 21 mmAutoclavable at 121 °CGrippers for vaccine vials, PP | Description: Grippers for vaccine vials, Material: PP, Dimensions (WxLxH): 20 x 152 x 35 mm
€111,69
Label Dispenser for Deep freeze labels | Type: Label Dispenser for Deep freeze labels
Brand: ISOLAB Laborgeräte GmbHPerfect organizer for fast and efficient use of labels. Manufactured from clear acrylic and holds 6 label box. Drop the label box in the label dispenser and feed the paper through the slot. The writing surface enables easy and clean writing on the label. The sharp cutting edge helps to tear off the labels. A weighted base with nonskid pads prevents sliding or lifting. The article is delivered without pen.Label Dispenser for Deep freeze labels | Type: Label Dispenser for Deep freeze labels
€83,60
LLG-Temperature block exact, aluminium | Array: 25 x 2.0 ml Cryogenic tubes with round bottom, Dimensions (W x D x H) mm: 197 x 99 x 32
Brand: LLG LabwareAvailable in 5 variantsSuitable for both cooling and heating, universally usable, uniform temperature distribution within the block, ideal for all temperature-sensitive applications.Aluminum blocks with conical compartments and closed bottom for easy and precise tempering of reaction tubes and PCR tubes. The precisely adapted shape of the borings and the closed bottom offer advantages compared with cylindrical drilled blocks with open bottom, such as much better heat transfer and temperature accuracy. Made of a special aluminum alloy with high thermal conductivity. Identical temperature conditions for all samples. Compact size, requiring little space. Suitable for 96-well plates, 8 or 12 strips and single tubes. Ideal for working with 8- or 12-channel pipettes. Blocks for different tube sizes and combinations of tube sizes as indicated, all working steps in one block, holes closed at the bottom and tapered to fit perfectly the respective tube sizes and offer an optimum heat exchange.LLG-Temperature block exact, aluminium | Array: 25 x 2.0 ml Cryogenic tubes with round bottom, Dimensions (W x D x H) mm: 197 x 99 x 32
€124,00
Copyright © 2026 - Achrom nv - BE 0445.025.508 | General terms | Cookiebeleid | Privacybeleid | Handcrafted by CrayonCru®