Even geduld

Uw bericht wordt verstuurd

Er is een fout opgetreden

Overshoes for dispenser HYGOMAT | Length mm: 440
Overshoes for dispenser HYGOMAT | Length mm: 440
Merk: Franz Mensch GmbHBeschikbaar in 4 varianten6257285:Polypropylene nonwoven, CPE coated, whiteWaterproof soleVery slip resistantPerfect for smooth surface6257286:PP overshoe with CPE sole, bluePolypropylene nonwovenAt the top nonwoven, at the bottom strong waterproof CPE soleVery tearproof and slip resistant6257287:CPE (Cast Polyethylene), blueStrong quality, approx. 60 micronLight protection against liquids6257288:Polypropylene nonwoven, blueAt the bottom structure made of CPEPermeable to air and light slip resistantFor dry areas
€23,97
Overshoes for dispenser HYGOMAT, CPE (Cast Polyethylene) | Type: Hygostar
Overshoes for dispenser HYGOMAT, CPE (Cast Polyethylene) | Type: Hygostar
Merk: Franz Mensch GmbHCPE (Cast Polyethylene), blueStrong quality, approx. 60 micronLight protection against liquids 47 cm length
€16,24
Overshoes for dispenser HYGOMAT, PP overshoe with CPE sole, | Type: Hygostar
Overshoes for dispenser HYGOMAT, PP overshoe with CPE sole, | Type: Hygostar
Merk: Franz Mensch GmbHPP overshoe with CPE sole, bluePolypropylene nonwovenAt the top nonwoven, at the bottom strong waterproof CPE soleVery tearproof and slip resistant44 cm length
€21,25
Overshoes for dispenser HYGOMAT, with textured sole, PP | Type: Hygostar
Overshoes for dispenser HYGOMAT, with textured sole, PP | Type: Hygostar
Merk: Franz Mensch GmbHPolypropylene nonwoven, blueAt the bottom structure made of CPEPermeable to air and light slip resistantFor dry areas46 cm length
€17,34
Oxygen flasks Winkler pattern, soda-lime glass | Nominal capacity ml : 250 ... 300, NS : 19 / 26
Oxygen flasks Winkler pattern, soda-lime glass | Nominal capacity ml : 250 ... 300, NS : 19 / 26
Merk: BRAND GMBH + CO.KGBeschikbaar in 2 variantenFor the determination of oxygen dissolved in water. The measured volume is specified to two decimal places. White withe inscription field. Solid, obliquely cut NS glass stopper can be secured with a fastening clip. Each flask is calibrated with its own stopper. Stoppers and flasks are therefore not interchangeable. The bottle and stopper each have the same device number.
€30,05
Oxygen meter inoLab® Oxi 7310 | Type: Oxi 7310, Description: Meter only including accessories
Oxygen meter inoLab® Oxi 7310 | Type: Oxi 7310, Description: Meter only including accessories
Merk: Xylem Analytics Germany (WTW)Beschikbaar in 4 variantenReliable Documentation for dissolved oxygen measurement, if desired also available with built-in printer. This is the inoLab® Oxi 7310 or inoLab® Oxi 7310P. A modern backlit graphic display with menu controlled user interface allows easy and intuitive operation. The mini USB-B interface provides fast data transfer to a PC. The internal memory can record up to 5000 GLP complying data including ID, date and time. The housing and the keypad are easy-to-clean. The inoLab® Oxi 7310 supports the long proven WTW galvanic sensors, CellOx® 325 and StirrOx® G. A calibration history of the 10 last calibrations allows conclusions on the state of the sensor. Calibrations versus external standards e.g. Winkler titration, are possible, too. The meter includes automatic barometric pressure and temperature compensation. An integrated thermal printer (58 mm width) is ready for printout of the measured data (option). The scope of delivery includes meter, stand, power supply and USB cable.
€1.676,00
Oxygen meter SD 315 Oxi | Type: SD 315 Oxi (Set 2), Cable length m: 10.0
Oxygen meter SD 315 Oxi | Type: SD 315 Oxi (Set 2), Cable length m: 10.0
Merk: Tintometer GmbHBeschikbaar in 2 variantenThe portable hand-held measuring instrument SD 315 Oxi meets the daily requirements for a robust and reliable instrument for the determination of dissolved oxygen in aqueous media. The Clark oxygen sensor with integrated temperature probe enables immediate measurements without time-consuming run-in time (polarisation time).Simple calibration against air or according to DIN EN ISO 5814Alarm function with adjustable limitsAutomatic pressure and temperature compensationAuto Hold FunctionAutomatic switch-off individually selectable from 1 to 120 minBacklit LCD displaySensor status display in % after each calibrationSalinity correctionParameter: dissolved oxygen (O2), O2 concentration in mg / l, O2 saturation in %, temperature in °C / °FBattery status indicatorFlexible stand at the rear allows the unit to be set up or fastened to a belt.Data transfer and evaluation via software possibleScope of supply: Instrument, protective covering, electrode holder, carrying case, galvanic oxygen sensor, KOH refill electrolyte, spare membrane, calibration bottle with sponge, batteries, manual
€1.049,90
Oxygen meter SD 400 Oxi L | Description: SD 400 Oxi L (base unit without sensor only)
Oxygen meter SD 400 Oxi L | Description: SD 400 Oxi L (base unit without sensor only)
Merk: Tintometer GmbHBeschikbaar in 4 variantenOxygen meter for use in sewage and water works, research and teaching as well as in aquaristics. High measuring accuracy and low maintenance, thanks to luminescence technology no electrolyte solution is required. The SD 400 Oxi L is ideally suited for the determination of "dilution BOD" due to the optimized probe for standard BOD bottles.Especially high measuring accuracy by luminescence technologyShort response time of the oxygen probeLow maintenance due to long-lasting oxygen probe and membrane headInflow to the oxygen probe is not necessary, the use of stirrers or manual stirring is no longer requiredIncludes software for extended and simplified data management with data logger functionBacklit LC display for dark environmentsScope of supply:SD 400 Oxi L (Set 1): Meter with 4 (AA) batteries, optical oxygen probe with 1.5 m cable, storage/calibration bottle, micro SD card with calibration data, software and manual (on Micro SD card), short manual, lanyard in caseSD 400 Oxi L (Set 2): as Set 1 but with optical oxygen probe with 3 m cableSD 400 Oxi L (Set 3): as Set 2 but with optical oxygen probe with 10 m cable
€446,90
Oxygen sensor DurOx® 325 | Type: DurOx® 325
Oxygen sensor DurOx® 325 | Type: DurOx® 325
Merk: Xylem Analytics Germany (WTW)For use with Oxi 3xxi, ProfiLine Oxi 1970i, ProfiLine 3205, 3210, 3310.Membrane-covered oxygen sensor with low flow requirement and removable cage guard, for field applications (fish farm revival pools) and for educational purposes.Ready to measure - no polarisation timeIMT compensation via two integral temperature sensorsService life with one electrolyte filling approx. 6 monthsMinimal flow requirementNo zero currentSensor is watertight (IP 68 - 2)Standard with 3m cable and watertight plugStandard with calibration/storage vessel OxiCal® -DStandard with cage guard SK-D
€740,00

Onze website maakt gebruik van cookies.
Zowel wij en onze derde partij partners maken gebruik van cookies. Sommige zijn strikt noodzakelijk om de site te laten functioneren, maar er bestaan ook optionele cookies.

De noodzakelijke en functionele cookies staan altijd aan. Als je op "alle cookies aanvaarden" klikt accepteer je ook de optionele cookies. Je kan zelf kiezen welke cookies je aan wil zetten via "voorkeuren instellen".

Onze website maakt gebruik van cookies.
Wat zijn cookies? Welke cookies gebruiken we en waarom? Lees meer in ons cookiebeleid

Noodzakelijke cookies

Cookies die onontbeerlijk zijn voor uw bezoek aan de Website en het correct gebruik daarvan

Functionele cookies

Cookies die uw bezoek aan de Website vergemakkelijken en aangenamer maken, onder meer door uw surfervaring te personaliseren.

Performantie cookies

Cookies die informatie verzamelen over uw gebruik van de Website met de bedoeling de inhoud van de Website te verbeteren en aan te passen aan de wensen van de Gebruiker.

Derde partij cookies

Cookies die geplaatst worden door derden die eigen diensten aanbieden via de Website zoals bijvoorbeeld social media, advertenties of videodiensten.