Even geduld

Uw bericht wordt verstuurd

Er is een fout opgetreden

Algemene labobenodigdheden

Analytisch meten en testen

Behandeling van vloeistoffen

Bescherming en veiligheid

Chromatografie

Cleanroom

Destillatie, scheiding, filtratie

Levenswetenschappen

Milieu-, bodem-, water-, voedselanalyse

Monstervoorbereiding

Optische instrumenten en microscopen

Reiniging en sterilisatie

Roeren, schudden, mengen

Vacuümtechnologie, drogen, droge opslag

Verwarmings- en koeltechnologie

467468469470471472
Laboratory autoclaves D-line | Type: 5075 EL-D, Capacity litres: 160, Dimensions (W x D x H) mm: 860 x 1120 x 740
Laboratory autoclaves D-line | Type: 5075 EL-D, Capacity litres: 160, Dimensions (W x D x H) mm: 860 x 1120 x 740
Merk: biomedis Vertriebsges. mbHBeschikbaar in 2 variantenThe features of the laboratory autoclave line are specifically designed for most common laboratory applications and can be used for the sterilzation of liquids, instruments, glass, waste and for the preparation of nutrient media.EL = horizontal loadingELV = vertical loadingEL-CGD and ELV-CGD = with integrated steam generator and rapid coolingStores the last 200 cycles in built-in memoryOption: second flexible Pt 100 probe30 Identification Codes and Passwords for access level controlThe controller and software comply with the 21 CFR part 11 standardFilter replacement notifications based on the number of cyclesData archiving via USB interfaceDouble sterilization time monitoringIn/Out test (enables technicians to check each system component separately)Sterilization temperature range up 105 °C to 137 °COptional Disinfection/Isothermal Temperature range from 60°C to 105°C7 standard sterilisation programsOptions available Fast cooling technology and ventilator to reduce cooling time additionallyVacuum pump to evacuate residual airExhaust air filtrationLifting device to elevate/to lower heavy sterilzation goodsPrinter to document the performed cycle (Please order separately)R.PC.R software allows complete control and monitoring of the autoclave
€22.695,00
Laboratory autoclaves with heating | Type: La-MCS-204, Pressure bar: 4, Temperature °C: 151
Laboratory autoclaves with heating | Type: La-MCS-204, Pressure bar: 4, Temperature °C: 151
Merk: kein Lieferant der LLG (MaschiBeschikbaar in 5 variantenFor pressurised steam sterilisation. Temperature control is monitored via a built-in PT 100 sensor. With 1 min. to 100 hours timer.An accessory media probe (Cat. No. 9.842 070), also Pt 100, can be connected. If the "media probe" button is switched on, the autoclave cools down to 60°C after sterilisation and maintains this temperature until the unit is switched off. Culture media can therefore be processed more easily.Chamber and lid made of stainless steel.La-VA-MCS.Fully automatic, 4 bar. With solenoid valve for automatically venting and pulsing steam when sterilising liquids. Safety catch is only temperature dependent when used with accessory media probe.
€6.044,20
Laboratory blender MemoryBlender2 | Type: MemoryBlender2 incl. sound protection hood, Min. speed rpm: 2000, Max. speed rpm: 15000
Laboratory blender MemoryBlender2 | Type: MemoryBlender2 incl. sound protection hood, Min. speed rpm: 2000, Max. speed rpm: 15000
Merk: Rotor siehe 9010382 FEUMAThe Laboratory Memory Blender 2 is a compact programmable commercial blender, driven by a high power ventilator cooled motor. The high-quality construction and the electronically controlled speed cycles guarantee a maximum performance. The microprocessor based controller features 6 push buttons with 12 optimized pre-programmed cycles which are suitable for most applications. Using the built-in "Memory" function, these cycles can be replaced with individual programs with different time and speed settings. Even the speed of the "Pulse" function can be changed. It's possible to disable the "Memory" function, to prevent unwanted overwriting. The blender can also be operated in a manual mode with 6 fixed speeds. The easy to understand LEDs show the state of the controller.The high performance programmable commercial silent blender.12 programmable cycles for automatic processing6 fixed speeds in manual modeVery quiet, space saving, solid and elegantPolished stainless steelEasy cleaningSafety features:By opening the plastic cover the motor stops immediatelyA protective switch prevents the motor from overloading and overheatingRugged main switchThe blender conforms to the international IEC standardsPlease order mixing containers separately.Before starting each operation the durability and resistance of all blender materials, e. g. glass, CNS, PP, rubber have to be checked concerning their tolerance against the substances to process.
€2.099,00
Laboratory Blender Waring®800 EG/S | Type: 800 ES, With: Stainless steel container, 1 l, Min. speed rpm: 22000
Laboratory Blender Waring®800 EG/S | Type: 800 ES, With: Stainless steel container, 1 l, Min. speed rpm: 22000
Merk: WaringBeschikbaar in 2 variantenVersatile laboratory mixer ideally suited for general laboratory work. Supplied either with a 1 L stainless steel container or a 1.2 L glass container.One velocity setting (22000 rpm)Epoxy coated motor housingTwo-piece lid vinyl/styrene Scope of supply: Mixer, container (stainless steel or glass) with handle and lid.
€747,00
Laboratory Blender Waring®8010/8011 | Type: 8010EG, With: Glass container, 1.2 l, Min. speed rpm: 18000
Laboratory Blender Waring®8010/8011 | Type: 8010EG, With: Glass container, 1.2 l, Min. speed rpm: 18000
Merk: WaringBeschikbaar in 4 variantenVersatile laboratory mixer ideally suited for general laboratory work. Supplied either with a 1 L stainless steel container or a 1.2 L glass container.Models 8010 EG/ES with mechanical timer (3 minutes).Two velocity settings (18000 or 22000 rpm)Epoxy coated motor housingTwo-piece lid vinyl/styreneScope of supply: Mixer, container (stainless steel or glass) with handle and lid
€1.220,00
Laboratory Blender Waring®LB20 EG/ES | Type: 20EG, With: Glass container, 1.2 l, Min. speed rpm: 500
Laboratory Blender Waring®LB20 EG/ES | Type: 20EG, With: Glass container, 1.2 l, Min. speed rpm: 500
Merk: WaringBeschikbaar in 2 variantenVersatile laboratory mixer ideally suited for general laboratory work. Supplied either with a 1 L stainless steel container or a 1.2 L glass container.Variable velocity settings (500 or 22000 rpm)Epoxy coated motor housingTwo-piece lid vinyl/styrene Scope of supply: Mixer, container (stainless steel or glass) with handle and lid
€1.732,00
Laboratory Bottle system DURAN® YOUTILITY | Nominal capacity: 1000 ml, Ø: 93 mm
Laboratory Bottle system DURAN® YOUTILITY | Nominal capacity: 1000 ml, Ø: 93 mm
Merk: DWK Life Sciences GmbH (Duran)Beschikbaar in 4 variantenSpecially shaped gripping zones on both sides of the bottle for easier and safer handlingWith the new YOUTILITY bottle thread opening or closing the bottle is significantly faster. The thread is fully compatible with DIN GL 45 closures and other accessoriesThe slimmer YOUTILITY bottle shape allows more optimal use of limited space in autoclaves and laboratory refrigeratorsA pre-defined labelling area is compatible with the dedicated DURAN® self-adhesive YOUTILITY bottle labelsNominal volume is shown at the top of the easy-to-read graduation scale for fast determination of the volumesGlass bottle body is moulded from the tried and tested DURAN® borosilicate 3.3 Type 1 neutral glass. DURAN® glass offers very good chemical resistance and high temperature resistanceThe YOUTILITY bottle has an integrated Retrace Code to allow full product traceability. The lot specific certificate of conformance is available at: www.duran-group.comEach DURAN® YOUTILITY bottle is supplied as a complete system, with a pouring ring (cyan polypropylene) and a GL 45 cap (cyan polypropylene)
€71,52
Laboratory bottle system DURAN® YOUTILITY, amber glass | Nominal capacity: 500 ml, Ø: 78 mm
Laboratory bottle system DURAN® YOUTILITY, amber glass | Nominal capacity: 500 ml, Ø: 78 mm
Merk: DWK Life Sciences GmbH (Duran)Beschikbaar in 4 variantenSpecially shaped gripping zones on both sides of the bottle for easier and safer handlingWith the new YOUTILITY bottle thread opening or closing the bottle is significantly faster. The thread is fully compatible with DIN GL 45 closures and other accessoriesThe slimmer YOUTILITY bottle shape allows more optimal use of limited space in autoclaves and laboratory refrigeratorsA pre-defined labelling area is compatible with the dedicated DURAN® self-adhesive YOUTILITY bottle labelsNominal volume is shown at the top of the easy-to-read graduation scale for fast determination of the volumesGlass bottle body is moulded from the tried and tested DURAN® borosilicate 3.3 Type 1 neutral glass. DURAN® glass offers very good chemical resistance and high temperature resistanceThe YOUTILITY bottle has an integrated Retrace Code to allow full product traceability. The lot specific certificate of conformance is available at: www.duran-group.comThe amber colour meets the requirements of the USP <660> and Eur. Ph. requirements for UV light protectionEach DURAN® YOUTILITY bottle is supplied as a complete system, with a pouring ring (cyan polypropylene) and a GL 45 cap (cyan polypropylene)
€212,84
Laboratory bottle with tamper-proof closure, PET sterile | Nominal capacity: 500 ml
Laboratory bottle with tamper-proof closure, PET sterile | Nominal capacity: 500 ml
Merk: Bürkle GmbHBeschikbaar in 8 variantenSterile laboratory bottle for use in laboratories and chemical handling areas. Good product presentation due to crystal-clear PET. Space-saving and absolutely leakproof. Ideal for storing and packing liquids.Sterile SAL 10-3 (according to ISO 11137)With tamper-proof closureWith moulded-in raised graduation
€3,16
Laboratory bottle, DURAN® amber, with screw cap and pouring ring made of PP | Nominal capacity: 150 ml, Ø: 62 mm
Laboratory bottle, DURAN® amber, with screw cap and pouring ring made of PP | Nominal capacity: 150 ml, Ø: 62 mm
Merk: DWK Life Sciences GmbH (Duran)Beschikbaar in 13 variantenFor the storage and transport of photosensitive substances. With easy-to-read graduation and large labelling field for easy identification. UV protection up to approx. 500 nm wavelength. 10 ml and 25 ml with specially shaped glass rim for better pouring, thus an additional pouring ring made of plastic is not necessary.ISO 4796-1USP standardRetrace codeAutoclavable
€33,78
Laboratory bottles Premium, DURAN®, with retrace code | Nominal capacity: 500 ml, Ø: 86 mm
Laboratory bottles Premium, DURAN®, with retrace code | Nominal capacity: 500 ml, Ø: 86 mm
Merk: DWK Life Sciences GmbH (Duran)Beschikbaar in 4 variantenDURAN®. ISO 4796-1, DIN ISO 718. Premium laboratory bottle with DIN thread. Highly leak-tight using Premium screw cap. Working temperature from -196 °C up to 200 °C. With PTFE coated silicone seal and pouring ring. With additional reverse scale, accuracy ±5%. Thermal shock resistance of 160K (tested by the German TÜV and with GS mark). Bottle and screw cap in accordance to USP/EP guidelines (Glass Type I / Neutral glass, screw cap raw material USP Class VI, seal FDA). Screw cap material is similar to PFA and highly resistant against chemicals. The material is free from colourants and therefore no leaching takes place. DMF available upon request. Premium bottle and screw cap fulfil highest requirements of the pharmaceutical, chemical and food industry. With Retrace code (Batch identification). Certificate available via the Internet (available for cap and bottle). Autoclavable.
€29,52
Laboratory bottles Premium, DURAN®, without cap | Nominal capacity: 100 ml, Ø: 56 mm
Laboratory bottles Premium, DURAN®, without cap | Nominal capacity: 100 ml, Ø: 56 mm
Merk: DWK Life Sciences GmbH (Duran)Laboratory bottles without pouring ring and without cap.
€11,42
467468469470471472

Copyright © 2026 - Achrom nv - BE 0445.025.508    |    Algemene voorwaarden    |    Cookiebeleid    |    Privacybeleid    |    Handcrafted by CrayonCru®

Onze website maakt gebruik van cookies.
Zowel wij en onze derde partij partners maken gebruik van cookies. Sommige zijn strikt noodzakelijk om de site te laten functioneren, maar er bestaan ook optionele cookies.

De noodzakelijke en functionele cookies staan altijd aan. Als je op "alle cookies aanvaarden" klikt accepteer je ook de optionele cookies. Je kan zelf kiezen welke cookies je aan wil zetten via "voorkeuren instellen".

Onze website maakt gebruik van cookies.
Wat zijn cookies? Welke cookies gebruiken we en waarom? Lees meer in ons cookiebeleid

Noodzakelijke cookies

Cookies die onontbeerlijk zijn voor uw bezoek aan de Website en het correct gebruik daarvan

Functionele cookies

Cookies die uw bezoek aan de Website vergemakkelijken en aangenamer maken, onder meer door uw surfervaring te personaliseren.

Performantie cookies

Cookies die informatie verzamelen over uw gebruik van de Website met de bedoeling de inhoud van de Website te verbeteren en aan te passen aan de wensen van de Gebruiker.

Derde partij cookies

Cookies die geplaatst worden door derden die eigen diensten aanbieden via de Website zoals bijvoorbeeld social media, advertenties of videodiensten.