Growth chambers KBW, KBWF series | Type: KBWF 240, Internal volume litres: 247, External dimensions (W x D x H) mm: 925 x 800 x 1465
Merk: BINDER GmbHBeschikbaar in 5 variantenHomogeneous lighting conditions with constant temperature and humidity conditions, the BINDER growth chambers. The responsive humidification system, the high-performance cooling and uniform light distribution ensure optimal growth conditions.KBW Series: Growth chambers with lightKBWF Series: Growths chambers with light and humidityEquipment:Electronically controlled APT.line™ preheating chamberTemperature range 0 °C to 70 °C (without humidity and illumination)Humidity range 10 % to 80 % RH (KBWF)Variable position illumination cassettes each with 5 daylight fluorescent illumination tubesController with time-segment and real-time programmingHumidity regulation with capacitative humidity sensor and vapor humidification (KBWF)Independent temperature safety device class 3.1 (DIN 12880) with optical and audible temperature alarmInterface: Ethernet, RS 485 (optional)Growth chambers KBW, KBWF series | Type: KBWF 240, Internal volume litres: 247, External dimensions (W x D x H) mm: 925 x 800 x 1465
€23.453,00
Humidity Chambers HCP | Type: HCP240, Nominal capacity l: 241, Max. grids: 12
Merk: Memmert GmbH + Co. KGBeschikbaar in 4 variantenThe Memmert humidity chamber HCP - This climate chamber offers a full range of comfort, reliability and safety. This humidity chamber is ideally suited for environmental testing, environmental simulation, accelerated service life tests and 85/85 tests according to IEC 60068-2-67 and IEC 60068-2-78.The active humidity control is the guarantee for ideal homogeneity of temperature and humidity as well as for short recovery times after opening the door. In combination with heating on all six sides, including heated inner glass door, it also minimises vaporisation in the interior and thus the risk of condensed water dripping onto the test object. An aluminium thermal conductive layer supports optimum temperature distribution and serves as a heat accumulator in case of a temporary power failure.Model variant TwinDISPLAY: ControlCOCKPIT with two colour displaysYou can find a detailed description of the "TwinDISPLAY" model at www.memmert.comHumidity Chambers HCP | Type: HCP240, Nominal capacity l: 241, Max. grids: 12
€14.312,00
Material test chamber FP series | Type: FP 56, Nominal capacity: 60 l, Temp. range °C: Amb. + 10 °C ... 300 °C
Merk: BINDER GmbHBeschikbaar in 10 variantenThe material test chambers with mechanical convection reliably ensure short drying times and fast heating. Thanks to programme functions and adjustable fan, temperature and recirculation conditions can be individually controlled even over a longer period of time.High temperature accuracy due to APT.line™ technologyAdjustable fan speedController with interval and real-time programmingUser-friendly controller with large displayElectromechanical control of the exhaust air flapClass 2 independent adjustable temperature safety device (DIN 12880) and class 3.1 independent temperature safety device (DIN 12880) with visual/acoustic alarm selectable on controllerModels up to 115 l stackableErgonomic handle designComputer interface: EthernetInternal data logger, measured values can be read out in open format via USBMaterial test chamber FP series | Type: FP 56, Nominal capacity: 60 l, Temp. range °C: Amb. + 10 °C ... 300 °C
€3.270,00
Options and Accessories Climatic Test Chamber CTC / TTC (see next page) | Type: BO, Description: Full-sight glass door, heated
Merk: Memmert GmbH + Co. KGBeschikbaar in 4 variantenOptions and Accessories Climatic Test Chamber CTC / TTC (see next page) | Type: BO, Description: Full-sight glass door, heated
€1.424,00
Options and accessories for constant climate chamber HPP | Type: T7, Description: Light module cold white 6.500 kelvin, For Volume l: 410/750
Merk: Memmert GmbH + Co. KGBeschikbaar in 10 variantenLight module cold white 6.500 K: LED strips arranged on the side walls of the interior, 10 for model 110; 14 for models 260, 410 and 750; programme controlled dimming from 0 to 100 % (in 1 % steps); ramp programming in combination with temperature and humidityLight module cold white 6.500 K + warm white 2.700 K: LED light strips - 10 strips for model 110; 14 strips for model 260, 410 and 750 (5 resp. 7 alternating cold white light strips and 5 resp. 7 warm white light strips); on the side walls of the interior, programme controlled dimming from 0 to 100 % (in 1 % steps); ramp programming in combination with temperature and humidityOptions and accessories for constant climate chamber HPP | Type: T7, Description: Light module cold white 6.500 kelvin, For Volume l: 410/750
€3.458,00
Perforated stainless steel shelf
Merk: Memmert GmbH + Co. KGBeschikbaar in 5 variantenPerforated stainless steel shelf
€255,00
Rapid incinerator | Type: SVD 95, Dimensions (W x D x H) mm: 450 x 310 x 180, Power W: 2500
Merk: Harry Gestigkeit GmbHBeschikbaar in 4 variantenFor individual and series incineration of solids and liquids. Upper platform with 8 openings of 34mm diameter, for porcelain crucibles up to 50mm diameter. Upper platform and housing made of stainless steel. With 120 minute timer with audible signal after timed period and separate continuous operation switch. A safety switch switches the mains supply off / on automatically on opening / closing the incinerator chamber. With 1.5 metre cable and earthed plug.Type SVR/EWith electronic temeprature control which allows stepless heating adjustment from 10 to 100%. Complete for use.Type SVD 95With digital temperature adjustment and display. Complete for use.Rapid incinerator | Type: SVD 95, Dimensions (W x D x H) mm: 450 x 310 x 180, Power W: 2500
€2.348,00
Refrigerated Incubator, Stainless steel, with humidity control | Nominal capacity l: 821, Max. grids: 19, Included grids: 6
Merk: Thermo Elect.LED GmbH (Kendro)Beschikbaar in 2 variantenThe units are suitable for apptications in the pharmaceutical or life science sector. Optimal incubation conditions due to temperature and humidity control.Stainless steel interior and shelvesGlass doorDirected horizontal airflow systemAdjustable defrost timerOver- and under-temperature protectionRefrigerant R-513AAccess port Ø 54 mmRefrigerated Incubator, Stainless steel, with humidity control | Nominal capacity l: 821, Max. grids: 19, Included grids: 6
€37.329,00
Refrigerated Incubator, Stainless steel, with light and humidity control | Type: Type 3906, Nominal capacity l: 311, Max. grids: 9
Merk: Thermo Elect.LED GmbH (Kendro)Beschikbaar in 2 variantenThe units are suitable for apptications in the pharmaceutical or life science sector. Optimal incubation conditions due to temperature, light, and humidity control.Stainless steel interior and shelvesMassive doorDirected horizontal airflow systemAdjustable defrost timerOver- and under-temperature protectionRefrigerant R-513AHeight-adjustable, vertical light modules (optional)Programmable light cycles: on/off cycles for every day of the week, dawn/dusk simulationsAccess port Ø 54 mmRefrigerated Incubator, Stainless steel, with light and humidity control | Type: Type 3906, Nominal capacity l: 311, Max. grids: 9
€30.000,00
Reinforced racks for BINDER chambers and incubators, stainless steel | For: KT 53
Merk: BINDER GmbHBeschikbaar in 9 variantenInclusive fasteners.Reinforced racks for BINDER chambers and incubators, stainless steel | For: KT 53
€248,00
Stainless steel grid
Merk: Memmert GmbH + Co. KGBeschikbaar in 8 variantenStainless steel grid
€241,00
Copyright © 2026 - Achrom nv - BE 0445.025.508 | Algemene voorwaarden | Cookiebeleid | Privacybeleid | Handcrafted by CrayonCru®