Even geduld

Uw bericht wordt verstuurd

Er is een fout opgetreden

Algemene labobenodigdheden

Analytisch meten en testen

Behandeling van vloeistoffen

Bescherming en veiligheid

Chromatografie

Cleanroom

Destillatie, scheiding, filtratie

Levenswetenschappen

Milieu-, bodem-, water-, voedselanalyse

Monstervoorbereiding

Optische instrumenten en microscopen

Reiniging en sterilisatie

Roeren, schudden, mengen

Vacuümtechnologie, drogen, droge opslag

Verwarmings- en koeltechnologie

KINEMATICA GmbH
789101112
Dispersing vessels POLYTRON® GS | Type: GS 25K, Volume ml: 150, Ø mm: 54
Dispersing vessels POLYTRON® GS | Type: GS 25K, Volume ml: 150, Ø mm: 54
Merk: KINEMATICA GmbHBeschikbaar in 15 variantenGS vessels for homogenisers POLYTRON® are available in borosilicate glass or stainless steel. GS jars have a cloverleaf-like shape creating high turbulences optimizing the mixing and the dispersing efficiency. This minimizes the machining time and reducing the application of energy.The GS-stainless steel containers with lid are equipped with baffles. The crossbars radically disturb the flow and generate additional opposing flows, optimizing the mixing in the dispensing vessel. The sterilisable screw caps with PTFE or a silicone seal are temperature-resistant up to 180 °C. The stainless steel 18/10 is rustproof, durable, has good insulating properties, completely hygienic, not toxic and not magnetic.
€178,00
Dispersing vessels POLYTRON® GS | Type: GS 40, Volume ml: 500, Ø mm: 80
Dispersing vessels POLYTRON® GS | Type: GS 40, Volume ml: 500, Ø mm: 80
Merk: KINEMATICA GmbHBeschikbaar in 15 variantenGS vessels for homogenisers POLYTRON® are available in borosilicate glass or stainless steel. GS jars have a cloverleaf-like shape creating high turbulences optimizing the mixing and the dispersing efficiency. This minimizes the machining time and reducing the application of energy.The GS-stainless steel containers with lid are equipped with baffles. The crossbars radically disturb the flow and generate additional opposing flows, optimizing the mixing in the dispensing vessel. The sterilisable screw caps with PTFE or a silicone seal are temperature-resistant up to 180 °C. The stainless steel 18/10 is rustproof, durable, has good insulating properties, completely hygienic, not toxic and not magnetic.
€112,00
Dispersing vessels POLYTRON® GS | Type: GS 40K, Volume ml: 500, Ø mm: 80
Dispersing vessels POLYTRON® GS | Type: GS 40K, Volume ml: 500, Ø mm: 80
Merk: KINEMATICA GmbHBeschikbaar in 15 variantenGS vessels for homogenisers POLYTRON® are available in borosilicate glass or stainless steel. GS jars have a cloverleaf-like shape creating high turbulences optimizing the mixing and the dispersing efficiency. This minimizes the machining time and reducing the application of energy.The GS-stainless steel containers with lid are equipped with baffles. The crossbars radically disturb the flow and generate additional opposing flows, optimizing the mixing in the dispensing vessel. The sterilisable screw caps with PTFE or a silicone seal are temperature-resistant up to 180 °C. The stainless steel 18/10 is rustproof, durable, has good insulating properties, completely hygienic, not toxic and not magnetic.
€260,00
Dispersing vessels POLYTRON® GS | Type: GS 50, Volume ml: 1000, Ø mm: 90
Dispersing vessels POLYTRON® GS | Type: GS 50, Volume ml: 1000, Ø mm: 90
Merk: KINEMATICA GmbHBeschikbaar in 15 variantenGS vessels for homogenisers POLYTRON® are available in borosilicate glass or stainless steel. GS jars have a cloverleaf-like shape creating high turbulences optimizing the mixing and the dispersing efficiency. This minimizes the machining time and reducing the application of energy.The GS-stainless steel containers with lid are equipped with baffles. The crossbars radically disturb the flow and generate additional opposing flows, optimizing the mixing in the dispensing vessel. The sterilisable screw caps with PTFE or a silicone seal are temperature-resistant up to 180 °C. The stainless steel 18/10 is rustproof, durable, has good insulating properties, completely hygienic, not toxic and not magnetic.
€134,00
Dispersing vessels POLYTRON® GS | Type: GS 50K, Volume ml: 1000, Ø mm: 90
Dispersing vessels POLYTRON® GS | Type: GS 50K, Volume ml: 1000, Ø mm: 90
Merk: KINEMATICA GmbHBeschikbaar in 15 variantenGS vessels for homogenisers POLYTRON® are available in borosilicate glass or stainless steel. GS jars have a cloverleaf-like shape creating high turbulences optimizing the mixing and the dispersing efficiency. This minimizes the machining time and reducing the application of energy.The GS-stainless steel containers with lid are equipped with baffles. The crossbars radically disturb the flow and generate additional opposing flows, optimizing the mixing in the dispensing vessel. The sterilisable screw caps with PTFE or a silicone seal are temperature-resistant up to 180 °C. The stainless steel 18/10 is rustproof, durable, has good insulating properties, completely hygienic, not toxic and not magnetic.
€326,00
Dispesing aggregate PT-DA 12/2WMEC-E157
Dispesing aggregate PT-DA 12/2WMEC-E157
€2.085,00
Dispesing aggregate PT-DA 20/2G-E210 Ø 20 mm
Dispesing aggregate PT-DA 20/2G-E210 Ø 20 mm
€2.919,00
Dry Mill POLYMIX® PX-MFC 90 D | Type: POLYMIX® PX-MFC 90 D, With: Blade grinding attachment, Min. speed rpm: 50
Dry Mill POLYMIX® PX-MFC 90 D | Type: POLYMIX® PX-MFC 90 D, With: Blade grinding attachment, Min. speed rpm: 50
Merk: KINEMATICA GmbHBeschikbaar in 6 variantenThe PX-MFC 90 D is suitable for dry sample grinding in the laboratory. It's possible to change the hammer and cutting mill sets.The blade grinding attachment is used for processing of dried, stringy and fibrous and grease-free materials. Application: Wood, straw, dried grease-free meat, leather, paper, carbon, synthetics etc.The hammer grinding attachment is used for processing of dried, brittle and grease-free materials. Application: Dried grain, dried beans, bones, rock, ceramics etc.Sieves 0.2mm up to 6mm diameterSafety system prevents start when lid is openPowerful three-phase motorMilling chamber with interchangeable insertsLED displayWorking volume of 300 ml (Funnel volume)1000 Watt, 3-phase motor provides a low noise level during operation, with 230 Volt connectionSieves from 0.2 to 6 mm mesh sizeIntegrated speed control with LED display for speed and status messagesSpeeds from 50 to 6,000 rpm for maximum grinding efficiencyThe motor cannot be operated when the chamber door is openIntegrated overheating, overload and rotor blocking protectionSafety stopper for certain grinding materialsScope of supply: Mill with Hammer or Cutting Mill sets, 2 mm sieve, tool set, wooden stand with 12 collection tubes
€8.047,00
Dry Mill POLYMIX® PX-MFC 90 D | Type: POLYMIX® PX-MFC 90 D, With: Blade grinding attachment, Min. speed rpm: 50
Dry Mill POLYMIX® PX-MFC 90 D | Type: POLYMIX® PX-MFC 90 D, With: Blade grinding attachment, Min. speed rpm: 50
Merk: KINEMATICA GmbHBeschikbaar in 6 variantenThe PX-MFC 90 D is suitable for dry sample grinding in the laboratory. It's possible to change the hammer and cutting mill sets.The blade grinding attachment is used for processing of dried, stringy and fibrous and grease-free materials. Application: Wood, straw, dried grease-free meat, leather, paper, carbon, synthetics etc.The hammer grinding attachment is used for processing of dried, brittle and grease-free materials. Application: Dried grain, dried beans, bones, rock, ceramics etc.Sieves 0.2mm up to 6mm diameterSafety system prevents start when lid is openPowerful three-phase motorMilling chamber with interchangeable insertsLED displayWorking volume of 300 ml (Funnel volume)1000 Watt, 3-phase motor provides a low noise level during operation, with 230 Volt connectionSieves from 0.2 to 6 mm mesh sizeIntegrated speed control with LED display for speed and status messagesSpeeds from 50 to 6,000 rpm for maximum grinding efficiencyThe motor cannot be operated when the chamber door is openIntegrated overheating, overload and rotor blocking protectionSafety stopper for certain grinding materialsScope of supply: Mill with Hammer or Cutting Mill sets, 2 mm sieve, tool set, wooden stand with 12 collection tubes
€8.047,00
Dry Mill POLYMIX® PX-MFC 90 D | Type: POLYMIX® PX-MFC 90 D, With: Blade grinding attachment, Min. speed rpm: 50
Dry Mill POLYMIX® PX-MFC 90 D | Type: POLYMIX® PX-MFC 90 D, With: Blade grinding attachment, Min. speed rpm: 50
Merk: KINEMATICA GmbHBeschikbaar in 6 variantenThe PX-MFC 90 D is suitable for dry sample grinding in the laboratory. It's possible to change the hammer and cutting mill sets.The blade grinding attachment is used for processing of dried, stringy and fibrous and grease-free materials. Application: Wood, straw, dried grease-free meat, leather, paper, carbon, synthetics etc.The hammer grinding attachment is used for processing of dried, brittle and grease-free materials. Application: Dried grain, dried beans, bones, rock, ceramics etc.Sieves 0.2mm up to 6mm diameterSafety system prevents start when lid is openPowerful three-phase motorMilling chamber with interchangeable insertsLED displayWorking volume of 300 ml (Funnel volume)1000 Watt, 3-phase motor provides a low noise level during operation, with 230 Volt connectionSieves from 0.2 to 6 mm mesh sizeIntegrated speed control with LED display for speed and status messagesSpeeds from 50 to 6,000 rpm for maximum grinding efficiencyThe motor cannot be operated when the chamber door is openIntegrated overheating, overload and rotor blocking protectionSafety stopper for certain grinding materialsScope of supply: Mill with Hammer or Cutting Mill sets, 2 mm sieve, tool set, wooden stand with 12 collection tubes
€8.047,00
Dry Mill POLYMIX® PX-MFC 90 D | Type: POLYMIX® PX-MFC 90 D, With: Hammer grinding attachment, Min. speed rpm: 50
Dry Mill POLYMIX® PX-MFC 90 D | Type: POLYMIX® PX-MFC 90 D, With: Hammer grinding attachment, Min. speed rpm: 50
Merk: KINEMATICA GmbHBeschikbaar in 6 variantenThe PX-MFC 90 D is suitable for dry sample grinding in the laboratory. It's possible to change the hammer and cutting mill sets.The blade grinding attachment is used for processing of dried, stringy and fibrous and grease-free materials. Application: Wood, straw, dried grease-free meat, leather, paper, carbon, synthetics etc.The hammer grinding attachment is used for processing of dried, brittle and grease-free materials. Application: Dried grain, dried beans, bones, rock, ceramics etc.Sieves 0.2mm up to 6mm diameterSafety system prevents start when lid is openPowerful three-phase motorMilling chamber with interchangeable insertsLED displayWorking volume of 300 ml (Funnel volume)1000 Watt, 3-phase motor provides a low noise level during operation, with 230 Volt connectionSieves from 0.2 to 6 mm mesh sizeIntegrated speed control with LED display for speed and status messagesSpeeds from 50 to 6,000 rpm for maximum grinding efficiencyThe motor cannot be operated when the chamber door is openIntegrated overheating, overload and rotor blocking protectionSafety stopper for certain grinding materialsScope of supply: Mill with Hammer or Cutting Mill sets, 2 mm sieve, tool set, wooden stand with 12 collection tubes
€7.623,00
Dry Mill POLYMIX® PX-MFC 90 D | Type: POLYMIX® PX-MFC 90 D, With: Hammer grinding attachment, Min. speed rpm: 50
Dry Mill POLYMIX® PX-MFC 90 D | Type: POLYMIX® PX-MFC 90 D, With: Hammer grinding attachment, Min. speed rpm: 50
Merk: KINEMATICA GmbHBeschikbaar in 6 variantenThe PX-MFC 90 D is suitable for dry sample grinding in the laboratory. It's possible to change the hammer and cutting mill sets.The blade grinding attachment is used for processing of dried, stringy and fibrous and grease-free materials. Application: Wood, straw, dried grease-free meat, leather, paper, carbon, synthetics etc.The hammer grinding attachment is used for processing of dried, brittle and grease-free materials. Application: Dried grain, dried beans, bones, rock, ceramics etc.Sieves 0.2mm up to 6mm diameterSafety system prevents start when lid is openPowerful three-phase motorMilling chamber with interchangeable insertsLED displayWorking volume of 300 ml (Funnel volume)1000 Watt, 3-phase motor provides a low noise level during operation, with 230 Volt connectionSieves from 0.2 to 6 mm mesh sizeIntegrated speed control with LED display for speed and status messagesSpeeds from 50 to 6,000 rpm for maximum grinding efficiencyThe motor cannot be operated when the chamber door is openIntegrated overheating, overload and rotor blocking protectionSafety stopper for certain grinding materialsScope of supply: Mill with Hammer or Cutting Mill sets, 2 mm sieve, tool set, wooden stand with 12 collection tubes
€7.623,00
789101112

Copyright © 2026 - Achrom nv - BE 0445.025.508    |    Algemene voorwaarden    |    Cookiebeleid    |    Privacybeleid    |    Handcrafted by CrayonCru®

Onze website maakt gebruik van cookies.
Zowel wij en onze derde partij partners maken gebruik van cookies. Sommige zijn strikt noodzakelijk om de site te laten functioneren, maar er bestaan ook optionele cookies.

De noodzakelijke en functionele cookies staan altijd aan. Als je op "alle cookies aanvaarden" klikt accepteer je ook de optionele cookies. Je kan zelf kiezen welke cookies je aan wil zetten via "voorkeuren instellen".

Onze website maakt gebruik van cookies.
Wat zijn cookies? Welke cookies gebruiken we en waarom? Lees meer in ons cookiebeleid

Noodzakelijke cookies

Cookies die onontbeerlijk zijn voor uw bezoek aan de Website en het correct gebruik daarvan

Functionele cookies

Cookies die uw bezoek aan de Website vergemakkelijken en aangenamer maken, onder meer door uw surfervaring te personaliseren.

Performantie cookies

Cookies die informatie verzamelen over uw gebruik van de Website met de bedoeling de inhoud van de Website te verbeteren en aan te passen aan de wensen van de Gebruiker.

Derde partij cookies

Cookies die geplaatst worden door derden die eigen diensten aanbieden via de Website zoals bijvoorbeeld social media, advertenties of videodiensten.